H&R Cup-Kit Sport Suspension

CARGRAPHIC AirLift Evolution Upgrade Kit



The CARGRAPHIC AirLift Evolution is available as an upgrade kit to be mounted on an existing factory front coilover suspension.  Fits cars with PASM or without 

It is important to note that the CARGRAPHIC AirLift Evolution can only be fitted to coilovers with cylindrical suspension springs. Alternatively, the kit can be fitted to Bilstein, Ohlins and KW coilover suspension kits, which are available to purchase from Design911

Please note when ordering we will need your full vehicle details, together with which type of coilover kit is being used with the kit 

Consisting of:
• 2x CARGRAPHIC AirLift Air spring / Air bellows
• 1x CARGRAPHIC AirLift Control unit V9
• 1x Wiring loom
• 1x Air duct set with connections
• 1x Remote control
• Fitting material
• Installation manual
• TÜV-Certificate*
• For vehicles with coilover suspension with cylindrical suspension springs

Features:

• Raising of the body by 55mm, measured at the fender
• Fast response time: maximum increase within 15 seconds
• No change or impairment of driving behaviour
• Safe control with automatic lowering from 50km/h
• Pneumatic operation, thus no liquid in the vehicle
• No reduction of the luggage compartment volume
• Low weight of approx. 3Kg
• Short installation time of approx. 3 hours.
• Operation via radio or permanently installed switch
• German TUEV certificate*
• Tested by world champion Walter Röhrl
• Fitting:  A qualified, experienced technician will need to fit this kit needs with due skill, care and diligence.

Fits:
Porsche 996 C2  2WD  Coupe  1997>>

Lowers car by: FT 30mm / RR 30mm

H&R Cup Kits consist of specially made springs and shocks-designed and engineered together-they provide optimal suspension damping and better control. H&R Cup Kits make a cohesive suspension package that outperforms and is more comfortable than separate off-the-shelf performance suspension components.

Designed and produced in H&R's ISO certified manufacturing facility in Germany, H&R Cup Kits are 100% German-made.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

40513-1

The product you are viewing cross references to these numbers

Fits:
Porsche 996 C2  2WD  Targa/Cabrio  1997>>

Please Note: Not for cars with Bilstein OEM sport suspension.

Lowers car by: FT 30mm / RR 30mm

H&R Cup Kits consist of specially made springs and shocks-designed and engineered together-they provide optimal suspension damping and better control. H&R Cup Kits make a cohesive suspension package that outperforms and is more comfortable than separate off-the-shelf performance suspension components.

Designed and produced in H&R's ISO certified manufacturing facility in Germany, H&R Cup Kits are 100% German-made.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

40513-2

The product you are viewing cross references to these numbers