Turbo Chargers
This is for a Pair
Porsche 996 911 Turbo Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Porsche IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.
Important legal notice (US)
WARNING - Proposition 65 Compliance Statement:
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Important Emissions Note:
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
- Porsche 996 TURBO 2000-05
SET OF 2
Porsche 996 911 Turbo Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Porsche IWG is easy to install and requires no special tools or fabrication. We've taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator.
Important legal notice (US)
WARNING - Proposition 65 Compliance Statement:
It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Important Emissions Note:
This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
- Porsche 996 TURBO 2000-05
MD429 & MD430 Stage 1 Twin Hybrid Turbos feature:
• Specially modified high flow GT Series Compressor Wheels fitted
• Compressor cover re-profiled to suit replacement compressor wheels
• Exhaust wheels lightened and modified to help reduce backpressure
• Turbochargers fully blueprinted to motorsport standards
• Twin piston ring seals fitted
• Estimated Power Output: 550-575bhp*
MD429 & MD430 Twin Hybrid Turbochargers fit:
Porsche 911 Turbo (996), engine code M96/70, year &, OEM number 99612301475. MD429 & MD430 turbos are a direct replacement for 5316-970-6727 & 5316-988-6727.
These Hybrid Turbos must be fitted as a pair.
*Please Note: Our hybrid turbochargers require exact engine management settings and/or supporting modifications to achieve these horsepower figures.
All Turbochargers are built to order and are usually despatched in 7 working days.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
MD429MD430
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
MD431 & MD432 Stage 2 Twin Hybrid Turbos feature:
• Specially modified high flow compressor wheels fitted
• Compressor cover re-profiled to suit replacement compressor wheels
• Exhaust wheels lightened and modified to help reduce backpressure
• Turbochargers fully blueprinted to motorsport standards
• Twin piston ring seals fitted
• Estimated Power Output: 575-600bhp*
MD431 & MD432 Twin Hybrid Turbochargers fit:
Porsche 911 Turbo (996), engine code M96/70, year &, OEM number 99612301475. MD431 & MD432 turbos are a direct replacement for 5316-970-6727 & 5316-988-6727.
These Hybrid Turbos must be fitted as a pair.
*Please Note: Our hybrid turbochargers require exact engine management settings and/or supporting modifications to achieve these horsepower figures.
All Turbochargers are built to order and are usually despatched in 7 working days.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
MD431MD432
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
TTE650 upgrade turbocharger for Porsche 993 / 996
Product Highlights:
• Original BWTS turbocharger as base part
• Early response
• BWTS cast compressor 6+6 BLADE
• BWTS High-Flow clipped turbine
• BWTS Upgrade bearing pack
• Plug and Play installation
• 650 PS Capable
• Proven TheTurboEngineers quality
• Single parts finely balanced then components assembled and core high-speed VSR balanced
• Supplied with a balance test result document
• Made in Germany
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 TURBO 2000-05
TTE800 upgrade turbocharger for Porsche 993 / 996
Introducing our TTE800 upgrade performance turbochargers based on the original K24 turbochargers to new higher output specification. Offering an upgrade to over 800PS.
Engineered & Enhanced
At the core of our TTE800 upgrade stage is a much larger TTE compressor wheel, chosen because it is highly efficient and creates an extremely high flow for comparative size. Re-Profiled compressor cover to optimised tolerance to ensure maximum compressor efficiency is given.
We CNC mill the exhaust turbine housing to accept a larger 9 blade turbine and shaft.
Special profile 360 deg high-performance motorsport journal bearing is fitted, to remain durable at higher loads with no loss in transient response. The actuator used is sprung OE unit set at 0.8bar crack pressure(1.0bar if wanted)
Equilibrium:
Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on application at up to 250,000 RPM in multiple planes using our in-house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.
• Original BorgWarner turbocharger as the base part
• TTE Billet geometry compressor 54.5MM inlet
• TTE 9 Blade High-Flow Low-Mass turbine
• TTE Upgrade bearing pack
• 800PS+ Capable on 102Ron
• Single parts finely balanced then components assembled and core high-speed VSR balanced
• Supplied with a balance test result document
• Proven TheTurboEngineers quality
• Made in Germany
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 TURBO 2000-05
Blue springs - 1.2 Bar = 14 - 18Psi
Red springs - 1.4 Bar = 17.5 - 20Psi
Please note you would need to buy a pair as they are sold as EACH
The Replacement Actuators Part No. 99612300010 are assembled with Green springs - Standard Psi suitable for at or slightly above factory boost levels.
Additional springs are required for tuning to custom boost levels.
Fit:
Porsche 996 Turbo
Porsche 996 GT2
Porsche 993 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FMAS049
The product you are viewing cross references to these numbers
- Porsche 993 (911) TURBO 1994-96
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
Fits:
Porsche 996 Turbo / 996 GT2 2001-05
Click 'Zoom in' for large parts diagram.
Diagram ref no 4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99612311
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
These replacement actuators utilise the latest piston design to irradicate the failures often associated with diaphragm actuators and are supplied complete with brackets ready to install.
Please Note
This product is assembled with Green springs - Standard Psi suitable for at or slightly above factory boost levels.
Additional springs are required for tuning to custom boost levels.
Yellow springs - 1 Bar = 9 - 15Psi
Blue springs - 1.2 Bar = 14 - 18Psi
Red springs - 1.4 Bar = 17.5 - 20Psi
Fit:
Porsche 996 Turbo
Porsche 996 GT2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99612300010
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
Part No. 5316-970-6727 - Porsche Part No. 99612301474. R/H
Part No. 5316-970-6726 - Porsche Part No. 99612301374. L/H
STAGE 1 UPGRADE
High flow GT series 6 blade compressor wheel - CNC re-profiled compressor housing - 360 degree thrust bearing - left & right hand thread shaft & wheel, twin high temperature exhaust piston ring seals fitted.
These turbos are a direct installation in replacement of your factory turbos. K24 turbos are much larger then the factory K16 turbos found on the standard 996TT. The K24 Turbos can handle over 550 crank horsepower. Unlike most turbos on other vehicles, you will not sacrifice low end horsepower or torque, however gain a larger amount in the mid range and top end.
Approx achievable output - 550-600 bhp with the correct ECU re-map
These set should only be fitted by engine builders or tuners as other performance parts may be required
The prices listed are for turbo chargers supplied on an exchange basis. Your Turbo charger must be a serviceable unit. If required on an out right purchase (if you have no old unit available), please ask for quotation.
- Porsche 996 TURBO 2000-05
Part No. 5316-970-6727 - Porsche Part No. 99612301474. R/H
Part No. 5316-970-6726 - Porsche Part No. 99612301374. L/H
STAGE 2 UPGRADE
These turbos are a direct installation in replacement of your factory turbos. K24 turbos are much larger then the factory K16 turbos found on the standard 996TT. The K24 Turbos can handle over 550 crank horsepower. Unlike most turbos on other vehicles, you will not sacrifice low end horsepower or torque, however gain a larger amount in the mid range and top end.
High flow Spec 5 blade compressor wheel - CNC re-profiled compressor housing - 360 degree thrust bearing - left & right hand thread shaft & wheel with cut back blades- twin high temperature exhaust piston ring seals fitted.
The prices listed are for turbo chargers supplied on an exchange basis. Your Turbo charger must be a serviceable unit. If required on an out right purchase (if you have no old unit available), please ask for quotation.
Approx achievable output - 650-700 bhp with the correct ECU re-map
These set should only be fitted by engine builders or tuners as other performance parts may be required
The prices listed are for turbo chargers supplied on an exchange basis. Your Turbo charger must be a serviceable unit. If required on an out right purchase (if you have no old unit available), please ask for quotation.
- Porsche 996 TURBO 2000-05
Units listed are direct replacement for the standard KKK K16 Turbochargers.
BorgWarner ref no 53169886727 / 53169886726
Fits:
Porsche 996 Turbo M96/70 01/12/1999>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 1 (Left, cyl 1-3) or 2 (Right, cyl 4-6).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99612301
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
Fits:
Porsche 996 Turbo M96/70 01/12/1999>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 1 (Left, cyl 1-3) or 2 (Right, cyl 4-6).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99612301
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
Units listed are direct replacements for the standard KKK K24 Turbochargers.
Fits:
Porsche 996 GT2 M96/70 S 2000/09/01>>
Porsche 996 Turbo S M96/70 S 2004/08/01>>
REPLACEMENT
These turbos are a direct installation in replacement of your factory turbos.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1 (Left, cyl. 1-3) and 2 (Right, cyl. 4-6)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99612398
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
Units listed are direct replacements for the standard KKK K24 Turbochargers.
Fits:
Porsche 996 GT2 M96/70 S 2000/09/01>>
Porsche 996 Turbo S M96/70 S 2004/08/01>>
REPLACEMENT
These turbos are a direct installation in replacement of your factory turbos.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1 (Left, cyl. 1-3) and 2 (Right, cyl. 4-6)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99612398
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Engine Modifications & Upgrades
- Electronic Fuel Injection Throttle Kits
- ECU Re-Mapping DIY
- Electronic Throttle Booster
- IRIDIUM POWER Spark Plugs
- IRIDIUM RACING Spark Plugs
- Plasma Direct Coils
- Hi Flow Air Filters
- Air Induction Kits
- Silicone Hoses / Kits
- Diverter Valves
- Short GearShift Kits
- Inter Coolers
- Performance Plenum
- ECU Reader / Fault Finder
- Exhaust Packages
- Fuel Additives
- Pedals / Floor Boards / Track Mats LHD Cars
- Pedals / Floor Boards / Track Mats RHD Cars
- Fire Extinguisher Mounts
- Brey-Krause Fire Extinguisher Mount
- Tow Eye Hooks & Tie Downs
- Clutches / Flywheels / Hydraulics
- Track & Race Coolant Radiators
- Wössner Forged Piston Kit
- CP Carrillo Connecting Rods
- Brake Hoses Stainless Steel Goodridge