Sport Silencers / Mufflers

Centre silencer delete assembly. Fits with both Porsche Sport Exhausts (Valved) and Standard OE Systems.



Pipe Ø: 2.26" (57.50mm)

Fits:
Porsche 911 (997.2) 3.6L & 3.8L (C2 / C4 / S / GTS) 2009-2012

Parts Assembly:
MSPO247: Centre Silencer Delete Assembly

Replacement Rear sport exhaust set OE style. Bead blasted stainless steel.



Fits:
Porsche 997 II 3.6L C2 / C4 2009-
Porsche 997 II 3.8L C2S / C4S 2009-

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99722097331S

The product you are viewing cross references to these numbers

DesignTek X-Pipe (primary muffler bypass) deletes the stock primary muffler and saves 6.4 lbs. from the rear of the vehicle. With a fast air flow the X-pipe increases BHP and Toque.



Made from high quality T304 14-16 gauge stainless steel, C.N.C. mandrel bent. The X-Pipe (primary muffler bypass) gives a great exotic car sound and power by about 5 decibels.

Fits:
Porsche 997 MKII

Click 'Zoom in' for large parts diagram.
3606009719 replace No 10.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009719

The product you are viewing cross references to these numbers

Rear sport exhaust set, "Super Sound", stainless steel.



Fits:
Porsche 997.2 3.6L - 3.8L Carrera 06/2008 - 12/2012

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1620613810

The product you are viewing cross references to these numbers

Rear sport exhaust set, stainless steel, polished



Fits:
Porsche 997.2 3.6L - 3.8L Carrera 06/2008 - 12/2012

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1620613710

The product you are viewing cross references to these numbers

DesignTek Sport Center Section for 997GT3, 997GT3 RS and GT3 Cup cars - Stainless Steel Polished with Matt Black pipes



This sports centre sections is a direct bolt on replacement, you don't even need to removal of bumper, Proprietary megaphone design- mandrel bent tubing which saves 14 lbs over the stock center section ( GT3 , RS with Ti center muffler saves 5 lbs )
Sport button remains fully functional for every day use, absolutely NO modifications. This system offers a deep aggressive exhaust note over the Porsche stock system the factory primary mufflers, catalyst and exhaust flaps are all retained

The DesignTek Sport Center Section system is a direct bolt on replacement center section which reduces weight, improves sound and offers a mild increase in performance. Porsche has done a wonderful job with the design and manufacture of the factory system with virtually no improvement to be made by installing a complete (mufflers, headers and cats) aftermarket system.

Direct bolt on replacement center section with dual 3.5 stainless tips (factory offers dual 3"). The system is made of mandrel bent T304 stainless tubing which is TIG welded and features a proprietary megaphone design to improve sound in the upper RPM range. The system saves over 14 lbs of weight over the stock ( stock gt3) and (5 lbs over GT3RS with Ti muffler), power is up 3-5 hp on average and now the sound is finally worthy of this magnificent engine.

Fits:
Porsche 997 GT3 / GT3RS 2007>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606609717

The product you are viewing cross references to these numbers

Sports Exhaust Muffler Cat Back (ROAD) Rear box. Porsche 997 Turbo Gen2 DesignTek



Road Version gives a great deep sound which every Porsche driver desires

This rear cat back system fit to the OE factory cats and tail pipes.

Fits:
Porsche 997 Turbo Gen2 2010>>
Porsche 997 Turbo S Gen2 2010>>

Click 'Zoom in' for large parts diagram.
3606009748 replace No 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009748

The product you are viewing cross references to these numbers

Sports exhaust rear silencer and catalytic converters.
Rear silencer including reduced cell catalytic converter



Fits:
Porsche 997 GT2 and GT2 RS 2007-2012

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

ECU REMAPPING - ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light

REDUCED CELL CATALYTIC CONVERTER - 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips

SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

HEAT SHIELDING - INSULATED
Tubi Style ensures maximum protection for components in critical and dangerous positions by using insulation made with the same technology employed by car manufacturers

Sports exhaust rear silencer straight pipe Porsche 997 GT3 and GT3 RS
Replaces rear silencer with straight through pipe



Fits
Porsche 911 GT3 and GT3 RS (997 Gen 1 and Gen 2)
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 upto 2019)

This product can be mounted on every GT3, GTR RS, GT3 RS 4.0 versions, both on 997 Gen 1, Gen 2 and on 991.1 and 991.2 up to 2019

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning


END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre

SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 65mm
This is the diameter in mm of the main pipe of the exhaust system

Sports exhaust silencer cross pipe Porsche 997 Gen 2 Carrera and Carrera S 2009-2012
Replaces rear centre exhaust silencer



Fits:
Porsche 997 Gen 2 Carrera and Carrera S

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector.

SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning

PIPE FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system.

Sports exhaust silencer with catalytic converter delete pipes
Porsche 997.2 turbo and turbo S 2010-2013



Fits
Porsche 911 turbo 997 Gen 2
Porsche 911 turbo S 997 Gen 2

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

CATALYTIC CONVERTER REMOVAL
This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound

ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips

END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.

MAIN PIPE DIMENSION 65mm
This is the diameter of the main pipe of the exhaust system

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Sports exhaust silencer with reduced 200 cell catalytic converter
Porsche 997.2 turbo and turbo S 2010-2013



Fits
Porsche 911 turbo 997 Gen 2
Porsche 911 turbo S 997 Gen 2

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

CATALYTIC CONVERTER REMOVAL - 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound

ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips

END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.

MAIN PIPE DIMENSION 65mm
This is the diameter of the main pipe of the exhaust system

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Sports exhaust silencer cross pipe Porsche 997 Gen 2 Carrera and Carrera S 2009-2012
Replaces rear centre exhaust silencer and side silencer. This exhaust does not come with new tail pipes. Original tips will be compatible.




Fits
2 and 4wd cars
Porsche 997 Gen 2 Carrera
Porsche 997 Gen 2 Carrera S

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

EXHAUST SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system

Sports exhaust silencers Porsche 997 Gen 2 Carrera and Carrera S 2009-2012
Replaces side silencers. This exhaust does not come with new tail pipes. Original tips will be compatible.



Fits Porsche 997 Gen 2 Carrera and Carrera S

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

EXHAUST SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system

Sports exhaust system with 3" pipes for Porsche 997TT Gen2 "Super Sport" exhaust produced to give a great deep sports car super sound that every 997 turbo driver desires plus the added benefit of a huge weight advantage over the original factory unit.



The system utilises the factory cats and factory tail pipes

Fits:
Porsche 997 Turbo MKII 2009>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009749

The product you are viewing cross references to these numbers