Pedals / Floor Boards / Track Mats LHD Cars

Rennline Aluminium Dead Pedal Rubber Grip.
LHD Cars

Fits:
Porsche 991

Porsche 991.2

Porsche 981 Boxster

Porsche 718 Boxster

Porsche 981 Cayman

Porsche 718 Cayman

Rennline's rubber grip aluminum pedal covers are the ultimate interior upgrade for any performance automobile. No other pedal on the market gives you the flexibility of adding and removing throttle extensions and lifter plates to fine tune your individual ergonomic preference. Rennline has taken this pedal design to the next level by utilizing rubber grips that can easily be replaced if needed. Unlike any other dead pedal on the market, Rennline starts with a thick piece of billet which gets machined and formed into a functional yet aesthetically pleasing part that protects both the factory dead pedal and the carpeting around it. This added material thickness also insures that the rubber grips never fall out. Each pedal set comes with 8 replacement rubber grips or can be purchased separately at any time. Rennline pedal sets are constructed of anodized aircraft grade aluminum with all stainless steel hardware.

Note: Pictures may not show actual product.

Rennline Aluminium Dead Pedal with Porsche Crest. Accepts OEM 30.5mm Wide Cast Crest. Rubber Grip.
LHD Cars

Fits:

Porsche 991

Porsche 991.2

Porsche 981 Boxster

Porsche 718 Boxster

Porsche 981 Cayman

Porsche 718 Cayman

Rennline's rubber grip aluminum pedal covers are the ultimate interior upgrade for any performance automobile. No other pedal on the market gives you the flexibility of adding and removing throttle extensions and lifter plates to fine tune your individual ergonomic preference. Rennline has taken this pedal design to the next level by utilizing rubber grips that can easily be replaced if needed. Unlike any other dead pedal on the market, Rennline starts with a thick piece of billet which gets machined and formed into a functional yet aesthetically pleasing part that protects both the factory dead pedal and the carpeting around it. This added material thickness also insures that the rubber grips never fall out. With this particular design we have machined a recess area into the dead pedal face to allow you to install a factory Porsche crest (Porsche number P644.559.210.00). Due to Copyright laws and restrictions, the factory crest must be purchased separately.Each pedal set comes with 8 replacement rubber grips or can be purchased separately at any time. Rennline pedal sets are constructed of anodized aircraft grade aluminum with all stainless steel hardware.

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P101C

The product you are viewing cross references to these numbers

Rennline Aluminium dead pedal, Rubber Grip.
Accepts OEM Dome decal crest. 
LHD Cars



Fits:
Porsche 991 

Porsche 991.2

Porsche 981 Boxster

Porsche 718 Boxster

Porsche 981 Cayman

Porsche 718 Cayman

Rennline's rubber grip aluminum pedal covers are the ultimate interior upgrade for any performance automobile. No other pedal on the market gives you the flexibility of adding and removing throttle extensions and lifter plates to fine tune your individual ergonomic preference. Rennline has taken this pedal design to the next level by utilizing rubber grips that can easily be replaced if needed. Unlike any other dead pedal on the market, Rennline starts with a thick piece of billet which gets machined and formed into a functional yet aesthetically pleasing part that protects both the factory dead pedal and the carpeting around it. This added material thickness also insures that the rubber grips never fall out. This particular design has a machined recess to allow you to install a factory Porsche OEM Dome Crest (Porsche number WAP10706614). Due to Copyright laws and restrictions, the factory crest must be purchased separately. Each pedal set comes with 8 replacement rubber grips or can be purchased separately at any time. Rennline pedal sets are constructed of anodized aircraft grade aluminum with all stainless steel hardware.

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P101D

The product you are viewing cross references to these numbers

Rennline Aluminium Floor Board. Passenger Side.
LHD Cars

Fits:
Will not fit cars with Bose sub in foot well
Porsche 996 1998-05
Porsche 997 2005>>
Porsche 987 Boxster
Porsche 987C Cayman

Give your late model a touch of the "RS" with these new aluminum floorboards. These boards have been specifically designed for the water cooled late model cars and can be used with all factory style floor mats or Rennline Track Mats. Installs in minutes and is available in silver anodize and black powder coat finishes.


Note: Pictures may not show actual product.

Rennline Brake Pedal Perforated.
LHD or RHD Cars

Fits:
Porsche 944 Tiptronic Cars
Porsche 924 Tiptronic Cars
Porsche 968 Tiptronic Cars
Porsche 996 Tiptronic Cars
Porsche 997 Tiptronic Cars
Porsche Boxster Tiptronic Cars
Porsche Cayman Tiptronic Cars
Porsche 991 Tiptronic Cars

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P22

The product you are viewing cross references to these numbers

Rennline Dead Pedal Perforated.
LHD Cars

Fits:
Porsche 996
Porsche 997
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman

Rennline pedal covers have been designed to give you ultimate pedal control and comfort. Our dead pedal is the largest available and gives your left foot plenty of surface area to grip when maneuvering through those hard turns. Foot slippage is never a problem with Rennline pedals. Our pedals all have a raised surface treatment that forces superior foot adhesion. Rennline pedal sets are constructed of aircraft grade aluminum and all stainless steel hardware.

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P19

The product you are viewing cross references to these numbers

Rennline Dead Pedal Rubber Grip
LHD Cars

Fits:
Porsche 996 1998-04
Porsche 986 Boxster 1997-04

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P59

The product you are viewing cross references to these numbers

Rennline Drivers Floorboard LHD.



Fits:
for LHD cars only
Porsche 991.1 / 991.2
Porsche 981 Boxster / Cayman
Porsche 718 Boxster / Cayman

Give your late model a touch of the "RS" with these new aluminum floorboards. These boards have been specifically designed for the water cooled late model cars and can be used with all factory style floor mats or Rennline Track Mats.

Installs in minutes and is available in silver anodize and black powder coat finishes.

Please Note
May not work with factory 991.2 floor mat

Rennline Gas Pedal Rubber Grip
LHD Cars



Fits:
Porsche 924 1977-88
Porsche 944 1982-91
Porsche 968 1992-95
Porsche 996 1998-05
Porsche 997 2005>>
Porsche 986 / 987 Boxster
Porsche 987C Cayman
Porsche 991
Porsche Panamera

Porsche 718 Cayman

Porsche 718 Boxster

Note: Throttle extensions are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P71

The product you are viewing cross references to these numbers

Rennline Gas Pedal Perforated.
LHD Cars

Fits:
Porsche 924 1977-88
Porsche 944 1982-91
Porsche 968 1992-95
Porsche 996 1998-05
Porsche 997 2005>>
Porsche 986 / 987 Boxster
Porsche 987C Cayman
Porsche 991
Porsche Panamera

Note: Throttle extensions are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P45

The product you are viewing cross references to these numbers

Rennline Passenger Floorboard.



Fits:
for LHD cars only
Porsche 991.1 / 991.2
Porsche 981 / 718 (982)

Give your late model a touch of the "RS" with these new aluminum floorboards. These boards have been specifically designed for the water cooled late model cars and can be used with all factory style floor mats or Rennline Track Mats.

Installs in minutes and is available in silver anodize and black powder coat finishes.

* May not work with factory 991.2 floormat

Rennline REV3 2PC Pedal Set Rubber Grip.
LHD Cars

Fits:
Porsche 986 Boxster Tiptronic
Porsche 996 Tiptronic

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV3 3PC Pedal Set Rubber Grip.
LHD Cars

Fits:
Porsche 986 Boxster Manual cars only
Porsche 996 Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV3 3PC Pedal Set Rubber Grip.
LHD Cars

Fits:
Porsche 986 Boxster Tiptronic cars
Porsche 996 Tiptronic cars

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV3 4PC Pedal Set Perforated.
LHD Cars

Fits:
Porsche 986 Boxster Manual cars only
Porsche 996 Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV3 4PC Pedal Set Rubber Grip.
LHD Cars

Fits:
Porsche 986 Boxster Manual cars only
Porsche 996 Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 2PC Pedal Set Perforated.
LHD Cars

Fits:
For Tiptronic / PDK Cars
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman
Porsche Panamera

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (981/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 2PC Pedal Set Perforated.
LHD Cars

Fits:
For Tiptronic / PDK Cars
Porsche 987 Boxster
Porsche 987 Cayman
Porsche 997

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 2PC Pedal Set Rubber Grip.
LHD Cars

Fits:
For Tiptronic / PDK Cars
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman
Porsche Panamera

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (981/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 2PC Pedal Set Rubber Grip.
LHD Cars

Fits:
For Tiptronic / PDK Cars
Porsche 987 Boxster
Porsche 987 Cayman
Porsche 997

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 3PC Pedal Set Perforated.
LHD Cars

Fits:
Porsche 991 Manual cars only
Porsche 981 Boxster Manual cars only
Porsche 981 Cayman Manual cars only
Porsche Panamera Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (981/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 3PC Pedal Set Perforated.
LHD Cars

Fits:
For Tiptronic / PDK Cars
Porsche 987 Boxster
Porsche 987 Cayman
Porsche 997

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 3PC Pedal Set Perforated.
LHD Cars

Fits:
Porsche 987 Boxster Manual cars only
Porsche 987 Cayman Manual cars only
Porsche 997 Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 3PC Pedal Set Rubber Grip.
LHD Cars

Fits:
Porsche 991 Manual cars only
Porsche 981 Boxster Manual cars only
Porsche 981 Cayman Manual cars only
Porsche Panamera Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic
•   Precision machined socket that accepts factory potentiometer arm (981/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 3PC Pedal Set Rubber Grip.
LHD Cars

Fits:
For Tiprtonic / PDK Cars
Porsche 981 Boxster
Porsche 981 Cayman
Porsche 991

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (981/991)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 3PC Pedal Set Rubber Grip.
LHD Cars

Fits:
Porsche 987 Boxster Manual cars only
Porsche 987 Cayman Manual cars only
Porsche 997 Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 3PC Pedal Set Rubber Grip.
LHD Cars

Fits:
For Tiptronic / PDK Cars
Porsche 987 Boxster
Porsche 987 Cayman
Porsche 997

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 4PC Pedal Set Perforated.
LHD Cars

Fits:
Porsche 987 Boxster Manual cars only
Porsche 987 Cayman Manual cars only
Porsche 997 Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 4PC Pedal Set Rubber Grip.
LHD Cars

Fits:
Porsche 981 Boxster Manual cars only
Porsche 981 Cayman Manual cars only
Porsche 991 Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (981/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 4PC Pedal Set Rubber Grip.
LHD Cars

Fits:
Porsche 987 Boxster Manual cars only
Porsche 987 Cayman Manual cars only
Porsche 997 Manual cars only

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 Fully Adjustable Gas Pedal for Manual and Tiptronic cars.
LHD Cars

Fits:
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman
Porsche Panamera

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Precision machined socket that accepts factory potentiometer arm (981/991/Pano)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline REV4 Fully Adjustable Gas Pedal for Manual and Tiptronic cars.
LHD Cars

Fits:
Porsche 987 Boxster
Porsche 987 Cayman
Porsche 997

Rennline's fully adjustable gas pedal system is an industry first, and finally solves the problem of the weak and unstable throttle assembly found on the late model water cooled cars. These factory plastic assemblies are notorious for hinge and housing failure due to its flimsy construction that was designed strictly for street use. The factory replaced these assembles on their race cars with a true metal to metal mount system, and now so can you. Rennline's fully adjustable pedal is a very unique system that gives you that true metal to metal mount, yet retains all your necessary electronics and or cables. Additionally, this pedal system can be adjusted in any direction, not only for height and depth, but also laterally and angularly, as well as width-wise using the supplied throttle extensions. You'll never again have to struggle to heel-and-toe, or be towed into the paddock due to a pedal failure.

•   All billet aluminum and 300 series stainless steel construction and compensates.
•   Eliminates factory plastic hinge and mount that are notorious to fatigue and failure.
•   Integrated hinge incorporates bronze bearings impregnated with 19% SAE 30 oil
•   Dramatically improves heel and toe driving by allowing for individual driver ergonomic adjustments
•   Spherical rod end and stainless steel linkage that utilizes OEM cable cams (996/986)
•   Precision machined socket that accepts factory potentiometer arm (987/997)
•   Removable throttle extensions
•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver
•   Rubber grips are removable to give you a smooth pedal surface if desired.

Note: Pictures may not show actual product.

Rennline Throttle Extension - Heel/Toe for LHD Cars



These throttle extensions are designed to work with Rennline gas pedals (# P70, P71, & P73).

All throttle extension kits now come with both heel and toe extensions that can be used individually or together. Throttle pedal cover is not included with this kit.

Depending on your driving style, this throttle extension kit can be used as a heel, toe, or heel/toe configuration. It's easy to install and can be added to most Rennline gas pedals. Available in red, silver, or black.


Note: Pictures may not show actual product.

If you have any questions as to whether or not this will work with your pedal, please contact us.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PE7071HT

The product you are viewing cross references to these numbers

Rennline Track Mat. Driver Side.
LHD Cars

Fits:
Porsche 996
Porsche 986 Boxster


Note: Pictures may not show actual product.