IMS by EPS Brand

IMS Intermediate Shaft Bearing Upgrade Eternal Fix -58MM FLANGE - OPEN ENGINES (while doing an engine rebuild)



Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)

Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 58 MM - Open Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!

WHAT MAKES OUR SOLUTION DIFFERENT?

Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.

In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.

EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing

IMS Intermediate Shaft Bearing Upgrade Eternal Fix -62MM FLANGE - CLOSED ENGINES (MUST USE OUR BORING TOOL IN ORDER TO INSTALL)
the boring tool can be purchased or rented from us
Code: 987997IMSTOOL

Fits:
Porsche 997 2005-08
Porsche Boxster 987
Porsche Cayman 987
(Not for M96 Engines)

Porsche Ims Intermediate Shaft Bearing Upgrade - Eternal Fix with Oil Pressure Feed - 62 MM - Closed Engine Permanently Fix Your Intermediate Shaft With The Eternal Fix! Unlike Failure Prone Ball Bearings, Eps Uses A Patented Cylindrical Bearing With Thrust Control.
Prevent future catastrophic engine failure permanently with the only true Eternal Fix for the notorious Porsche intermediate shaft bearing. Unlike the other failure-prone ball bearing products that the original IMS and other upgrades on the market use, EPS uses a patented cylindrical bearing with thrust control that can be pressed directly into the back of the engine without disassembly. The cylindrical bearings have over 12 times the load capacity of other ball bearing solutions making the EPS IMS bearing the clear choice. Backed by a full 5-year warranty and includes an oil feed modification kit. Order yours today!

WHAT MAKES OUR SOLUTION DIFFERENT?

Roller bearings are not intended for carrying large axial loads. Similar to failure-prone ball bearings, when cylindrical roller bearings are used for thrust control, the roller becomes compromised due to the limited surface contact area on the sides of the rollers. The results of using a cylindrical bearing for thrust control will be similar to all other ball bearing solutions.

In our patented system, we use a 15mm cylindrical bearing with thrust control that allows for the separation of the axial load from the radial load. Our roller bearings do NOT carry the axis load (thrust control) on the side, which leaves the roller free to carry only the radial load (main load). The axial load is carried exclusively on the entire permitter of the outer race. This results in a bearing that is not overloaded and will last the lifetime of the engine.

EPS recommends using this product in conjunction to the Rear Main #8 Seal and Housing

Intermediate shaft (IMS) bearing kit - for Porsche

The 8102 has been developed specifically for the quick and safe removal and replacement of the Porsche IMS (Intermediate Shaft) bearing on the M96 and M97 engines fitted to all water cooled 911, Boxster and Cayman models from 1999 through to 2008. Complete with the camshaft and crankshaft timing tools.

Porsche Applications: 911, Boxster, Cayman (1999 - 2008).
Engine code applications include: M96, M97.
Kit includes camshaft and crankshaft locking tools for both early and late engines.
2 methods for removal of the bearing are provided. Bearing installation as per OEM instruction.
Made in Sheffield. IMPORTANT: ensure the force screw is well lubricated with molybdenum disulphide grease before use.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

8102

The product you are viewing cross references to these numbers

IMS Tool Kit by EPS



Bearing puller and adapter for extracting the existing bearing from the original center stud/bearing support (shown above)
Bearing driver tool to allow easy installation of the new bearing (shown above)
"Easy Out" adapter to allow extraction of bearing using the EPS bearing puller when and if the center stud/bearing support is broken or breaks during extraction
Crankshaft Pully TDC Lock Pin to secure the engine at the proper position to do an IMS Retrofit
Camshaft locks for both early 5-chain and later 3-chain engines (kit includes one ea.)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610590102TOOL

The product you are viewing cross references to these numbers

Outright IMS Boring Tool for Installing IMS Bearing



This boring tool can be also be rented from us
for installing our 62mm IMS kit Code: 987997IMS62MM. For rental please see other listings.

When you purchase this product you will be supplied with brand new set of tools that haven't been used on any jobs.
We will not accept a return of this part if we find out that it is in used condition.


For IMS Boring Tool instructions please CLICK HERE

Rental IMS Boring Tool for Installing IMS Bearing



This boring tool can be purchased or rented from us
for installing our 62mm IMS kit Code: 987997IMS62MM

Costs
The boring tool cost will be refunded once the tool is returned to us and checked. The boring tool can also be purchased outright for £1895.00

For IMS Boring Tool instructions please CLICK HERE