Front Spoilers / Bumpers

911 GT3 Manthey Kit. For vehicles with a 20/21-inch Manthey lightweight wheel set.



Fits:
Porsche 992 GT3 - 2021 Onwards

911 GT3 Manthey Kit

The Manthey Kit offers comprehensive optimisation of the race track characteristics of the 911 GT3 (Type 992). In close cooperation with the engineers from Porsche and Manthey, the specifications of the vehicle have been specifically coordinated for use on the race track and at track days. For Porsche works driver Kévin Estre, this means a lap time of 6:55.737 minutes for the 20.8 kilometres of the Nürburgring Nordschleife. And for all other drivers: even better handling, even faster cornering speeds and even more adrenaline.

Improvements were achieved through the use of new aerodynamic and chassis components, modifications to the brake system and the optionally available Manthey lightweight wheel set. The 911 GT3 Manthey Kit is the result of decades of experience in GT sport, complex aerodynamic simulations and countless test kilometres on the Nürburgring Nordschleife. In addition, all components have been intensively matched and tested on the driving dynamics test bench and in the high-performance wind tunnel of the Porsche Development Centre in Weissach.

Aerodynamics package
In keeping with the principle of "form follows function", the aerodynamics of the vehicle have been modified and its design has been further honed: A new, larger lip is used at the front of the vehicle, The combination of its optimised geometry, the characteristic flaps and the additional air baffle elements on the underbody increases the downforce at the front axle by approx. 30%. The downforce on the rear axle is increased by around 45% by the new flow-optimised rear diffuser with longer fins in combination with the larger rear wing made of exposed carbon fibre. The rear wing features an angled blade as well as enlarged side plates painted with the Manthey logo. The aerodynamics package is completed by the carbon aerodiscs on the rear wheels. These reduce turbulence at the rear end and are available with a decorative film to match the colour of the vehicle’s exterior or wheel rims. Overall, the aerodynamics package significantly improves vehicle handling and thus contributes significantly to the performance of the 911 GT3.

Coilover suspension
Extensive testing was performed on the race track and driving dynamics test bench to develop a set-up for the coilover suspension (available with and without a front axle lift system) that leaves no wish unfulfilled in terms of performance, driveability or comfort. For example, the all-aluminium spring struts feature four-way adjustability of the damping force. The lightweight components allow ultra-precise adaptation to the respective track conditions and individual driver preferences. The damping force can be adjusted with easy accessibility and without tools in both the compression and rebound stages for low and high speed settings. The moderately adapted spring rates (+10% on the front axle, -7% on the rear axle) mean that the handling and balance of the 911 GT3 have been further optimised.

Brake line set with steel sleeve
The brake line set with steel sleeve ensures even more direct pedal feedback and a faster response time as a result. This component of the Kit was also tested and co-developed by Manthey on the Nürburgring Nordschleife.

The brake system of the 911 GT3 can optionally be fitted with racing brake pads. These pads were developed specifically for race track use and improve the fading characteristics as well as responsiveness and control. The brake pads are characterised by constant friction behaviour over a wide temperature range and very good wear behaviour with low disc wear.

Additional equipment
Two red towing loops are included in delivery for race track use. These are bolted onto the designated coils on the front and rear ends and must be removed again before driving on public roads.

As additional visual highlights, the 911 GT3 Manthey Kit includes new illuminated door entry guards in matte carbon with the Manthey logo in red and white. The LED door projectors in the side door exit lights project a white Manthey logo on both driver's and passenger's sides. The Manthey logo can also be applied to the vehicle doors in white or black.

Wheel set
The Manthey Kit is compatible with both the 20/21-inch 911 GT3 wheel set (standard gear wheel set) and the 20/21-inch 911 Manthey lightweight wheel set (available without tyres, valve and tyre pressure monitoring system sensor).

In order to further reduce the overall weight of the already lightweight-designed vehicle, the design of the standard wheel was technologically optimised with the 20/21-inch 911 Manthey lightweight wheel set. The result: A reduction in the springless and rotating masses by 16.1 lbs. (7.3 kg) per vehicle set, which significantly benefits the responsiveness of the spring/damper elements and further improves vehicle control.

The 20/21-inch 911 GT3 wheel set is available in the following paint finishes:

- Brilliant Silver

- Black (satin-gloss)

- Dark Silver

The 20/21-inch 911 Manthey lightweight wheel set is available in the following paint finishes:

- Brilliant Silver

- Black (satin-gloss)

- Dark Silver

- Neodyme

The wheel sets are suitable for the corresponding tyre sizes:

Front axle: 9.5J x 20 RO 46 with 255/35 ZR 20 (97Y) XL tyres

Rear axle: 12 J x 21 ET 45 with 315/30 ZR 21 (105Y) XL tyres.

Porsche recommends using Michelin Pilot Sport Cup 2 R tyres.

Note: Approval for road use and warranty are unaffected. The individual components of the 911 GT3 Manthey Kit are precisely matched. For this reason, they must only be installed together on the vehicle. Individual offers are shown separately. For further information, please contact your Porsche Centre.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992044855

The product you are viewing cross references to these numbers

Cup spoiler lip / spoiler sword for Porsche 911/992 with ABE (registration free!)

This will not fit cars with the Factory Sport Design Package

Attach and drive off - without any further entry in the vehicle documents. With ABE (vehicle-specific TÜV approval), therefore registration-free. There is therefore no need for acceptance by one of the technical monitoring services.

• Suitable for Porsche 911/992 year of construction 2019>>
• Suitable for the model / body variant (s) Carrera, Carrera 4, Carrera S and Carrera 4S
• Sporty look and integrated underride protection for your original bumper
• Is screwed to the original bumper, mounting material is included
• With ABE and therefore registration free
• Good fit, as no universal part but specially developed for this type of vehicle!
• Cup spoiler lip is made of high-quality ABS material and has a structured (grooved) surface, making the spoiler lip very insusceptible to scratches
• Due to the structured surface, no painting is necessary! Of course, the surface structure still allows painting (product is unpainted)
• Including assembly instructions
• Material is flexible

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Front bumper lower spoiler - Non Aerokit

Fits:
Porsche 992 turbo S - 2019 Onwards
For cars WITHOUT Aerokit

Front bumper lower front spoiler made from FRP (fibreglass reinforced plastic) to be painted.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992807100D

The product you are viewing cross references to these numbers

Front bumper lower upper spoiler lip. Primed.



Fits:
Porsche 992.1 Carrera 2019>> cars with SportDesign package
Porsche 992.1 Carrera 2019>> GTS models

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992807100FG2X

The product you are viewing cross references to these numbers

Front bumper. Primed.



Fits:
for cars Without park distance control (option code: P7X0)
Porsche 992.1 Carrera 2019>> cars with SportDesign package
Porsche 992.1 Carrera 2019>> GTS models

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992898010C

The product you are viewing cross references to these numbers

Front bumper. Primed.



Fits:
for cars with Park distance control in front and rear (option code: P7X2)
Porsche 992.1 Carrera 2019>> cars with SportDesign package
Porsche 992.1 Carrera 2019>> GTS models

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992898010D

The product you are viewing cross references to these numbers

Front bumper. Primed.



Fits:
for cars with Park assist (option code: P7X5)
Porsche 992.1 Carrera 2019>> cars with SportDesign package
Porsche 992.1 Carrera 2019>> GTS models

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992898010E

The product you are viewing cross references to these numbers

Front spoiler.
With TÜV parts certificate (§19.3),



Fits:
Porsche 992 Carrera | S | 4S | GTS | Targa | Convertible | with Sport Design Front Bumper

The Moshammer 992 front spoiler ensures the best possible aerodynamic properties and at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.

This front spoiler with side wings adapts the factory front bumper and ads an element of visual appeal.

This front spoiler is delivered unpainted.
Mounting material is included.

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P992.40.102

The product you are viewing cross references to these numbers

Manthey Performance Kit for Porsche 992 GT3. For vehicles with a front axle lift system (PR474) and a 20/21-inch GT3 wheel set.

Porsche Tequipment offers a Manthey Performance Kit for the current 911 GT3 for even better performance on circuits. The 911 GT3 with Manthey Performance Kit lapped the Nürburgring's Nordschleife in 6:55.737 minutes. This is exactly 4.19 seconds faster than the 911 GT3 without kit.

The modifications are focused on aerodynamics and chassis components. The new Performance Kit was developed in close collaboration between the Porsche engineers in Weissach and the Nordschleife specialists from Manthey in Meuspath. The Porsche Tequipment circuit-optimised components are sold through Porsche Centres.

Significant increase in downforce

The extensive changes to the aero package are what make the Manthey Performance Kit for the 911 GT3 recognisable. A larger spoiler lip and side flaps are fitted at the front of the car. In conjunction with the modified air guide elements on the underbody, they increase the downforce on the front axle. The modifications at the rear are even more pronounced. The swan-neck-supported wing of the 911 GT3 is wider, and now features a tear-off edge (Gurney). The end plates with their distinctive Manthey logos have also been enlarged, as has the wing’s angle of attack. The fins of the rear diffuser have been extended and are now made of CFRP. The aerodiscs on the rear wheels, which are also made of CFRP, further enhance the car’s aerodynamic efficiency.

In collaboration with Manthey, Porsche has developed special four-way coilover suspension for the 911 GT3 that can be adapted for use on the circuit. The suspension struts can be adjusted to four positions, and rebound and compression can be tweaked without tools. The moderate changes to the spring rates (10 percent higher on the front axle, seven percent lower on the rear) contribute to improved on-the-limit handling, without making any compromises necessary when it comes to day-to-day usability.

Adaptable coilover suspension

A lightweight forged wheel set with 20- and 21-inch rims is available as an option for the Porsche 911 GT3. They reduce unsprung mass by a total of 7.3 kilograms. They are available in Brilliant Silver, Dark Silver, Neodyme and (satin-gloss) Black. A set of brake lines with steel braids come as standard with the kit. They guarantee a very precise pressure point and thereby ensure optimal modulation of the brakes. Special racing brake pads are available as an option for the 911 GT3 with the Manthey Performance Kit. Door projectors and illuminated door sill guards with the Manthey logo help to personalise the car visually. A towing loop is also included in the kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99204485502

The product you are viewing cross references to these numbers

Manthey Performance Kit for Porsche 992 GT3. For vehicles without a front axle lift system (-PR474) and a 20/21-inch GT3 wheel set.

Porsche Tequipment offers a Manthey Performance Kit for the current 911 GT3 for even better performance on circuits. The 911 GT3 with Manthey Performance Kit lapped the Nürburgring's Nordschleife in 6:55.737 minutes. This is exactly 4.19 seconds faster than the 911 GT3 without kit.

The modifications are focused on aerodynamics and chassis components. The new Performance Kit was developed in close collaboration between the Porsche engineers in Weissach and the Nordschleife specialists from Manthey in Meuspath. The Porsche Tequipment circuit-optimised components are sold through Porsche Centres.

Significant increase in downforce

The extensive changes to the aero package are what make the Manthey Performance Kit for the 911 GT3 recognisable. A larger spoiler lip and side flaps are fitted at the front of the car. In conjunction with the modified air guide elements on the underbody, they increase the downforce on the front axle. The modifications at the rear are even more pronounced. The swan-neck-supported wing of the 911 GT3 is wider, and now features a tear-off edge (Gurney). The end plates with their distinctive Manthey logos have also been enlarged, as has the wing’s angle of attack. The fins of the rear diffuser have been extended and are now made of CFRP. The aerodiscs on the rear wheels, which are also made of CFRP, further enhance the car’s aerodynamic efficiency.

In collaboration with Manthey, Porsche has developed special four-way coilover suspension for the 911 GT3 that can be adapted for use on the circuit. The suspension struts can be adjusted to four positions, and rebound and compression can be tweaked without tools. The moderate changes to the spring rates (10 percent higher on the front axle, seven percent lower on the rear) contribute to improved on-the-limit handling, without making any compromises necessary when it comes to day-to-day usability.

Adaptable coilover suspension

A lightweight forged wheel set with 20- and 21-inch rims is available as an option for the Porsche 911 GT3. They reduce unsprung mass by a total of 7.3 kilograms. They are available in Brilliant Silver, Dark Silver, Neodyme and (satin-gloss) Black. A set of brake lines with steel braids come as standard with the kit. They guarantee a very precise pressure point and thereby ensure optimal modulation of the brakes. Special racing brake pads are available as an option for the 911 GT3 with the Manthey Performance Kit. Door projectors and illuminated door sill guards with the Manthey logo help to personalise the car visually. A towing loop is also included in the kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99204485503

The product you are viewing cross references to these numbers

TechArt front bumper air frames - Standard fron bumper



Fits:
Porsche 992 Carrera / Carrera S / GTS
Porsche 992 Carrera 4 / Carrera 4S / GTS
Porsche 992 Targa 4 / Targa 4S / Targa 4 GTS
Not for SportDesign front bumper
Two-piece TECHART Airframes highlight the radiator air intakes at the front of a 911 and enhance its powerful appearance.
Here too, the choice of the paintwork offers additional personalisation opportunities, including a colour-matching of standard body parts such as the active air intake louvers.

The TECHART front bumper air frames are made from black PU-RIM material.

Kit contains four pieces

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

092100110009

The product you are viewing cross references to these numbers

TechArt front bumper side air outlet grilles



Fits:
Porsche 992
Porsche 992 turbo

The TECHART air outlet grilles also fit 911 models equipped with Porsche's SportDesign package

A new design feature from TECHART.
Side air outlet trims in front of the wheel arches on both sides of the front bumper

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

092100182009

The product you are viewing cross references to these numbers

TechArt front spoiler I



Fits:
Porsche 992 Carrera / Carrera S / GTS
Porsche 992 Carrera 4 / Carrera 4S / 4 GTS
Porsche 992 Targa 4 / Targa 4S / Targa 4 GTS

The new five-piece TECHART Front Spoiler I includes a splitter element which seems to float freely inside the surrounding spoiler shape.
As a result, the front apron cowers close to the road surface.

Design trims on both sides of the spoiler as well as the two-tone paintwork add an elegant and sporty touch.

The TECHART Front Spoiler I also fits 911 models equipped with Porsche's SportDesign package and the spoiler can be installed without removing the 911's front bumper.


Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

092100100009

The product you are viewing cross references to these numbers