Front Spoilers / Bumpers

Carbon fibre front bumper dive plane kit.

Available in Matte Carbon Fibre



Fits
Porsche 981 Cayman GT4

The Dive Planes for the Porsche 981 Cayman GT4 are specifically designed to increase front-end downforce, increase the high-pressure airflow to the factory intake duct, and to keep drag increase minimal.

These units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon, with a matte clear finish.

Dive planes also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing or diffuser.

Kit Includes
• Dive Plane x 4 (Upper x 2, Lower x 2)
• 3M VHB Tape (4 Pieces, 1 for each Dive Plane)
• Install Template
• Hardware Kit, Includes All Hardware for Install

Carbon fibre front bumper dive plane kit.

Available in Matte Carbon Fibre



Fits
Porsche 987 Cayman - 2005 to 2012 (Gen 1 and Gen 2)

The Verus Engineering Dive Plane (Canard) Kit adds front-end downforce without the necessity of moving the front splitter further forward.

Utilizing state-of-the-art analysis software during the R&D process, we were able to extract more performance for the given build volume; increasing downforce generated from the dive planes.

This dive plane kit was designed for owners looking to shift aero balance forward to help aid in balancing out a large rear wing or diffuser.

Kit Includes
• Dive Plane x 2 (Left and Right)
• 3M VHB Double Sided Tape, Cut to Dive Plane Size (2)
• Template (2)
• Hardware Kit, Includes All Hardware Necessary for Install

Features
Reduce Lift (Increase Downforce)
Shift Aero Balance Forward
Allows for Fine Tuning of Aero Balancing (Forward Biased)
Help Seal Sides of Car
Evacuate Air From the Front of the Wheel Well

Specification
CFD Optimized Design
Pre-Preg, Autoclave Cured, Carbon Fiber Composition
Stainless Hardware Used Throughout 
Made in the U.S.A.

Carbon front splitter kit.



Fits
Porsche 981 Cayman GT4

Front splitters are very effective at producing front end downforce without increasing drag significantly. They do this by creating a large pressure delta between the top and bottom surfaces. We then incrementally improved the front splitter by adding design tweaks to the underside of the splitter to improve flow with our carbon splitter diffusers.

The splitter is produced from a carbon thermoplastic, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either. It is a great splitter material.

The air dam is used to bring the splitter flat with the vehicle's underbody and improve performance further. The air dam is produced with pre-preg carbon fiber and is cured in an autoclave for reduced weight and improved strength.

Kit Includes
• Carbon Spill Plate (2)
• Carbon Front Air Dam
• Carbon Composite Splitter
• Carbon Splitter Diffuser (2)
• Sheet Aluminum Bracket (10 Pieces)
• Hardware Kit Including All Necessary Bolts/Nuts/Washers

Features
Greatly Increases Front End Downforce
Produces High Downforce for Large Rear Wings
Capable of Handling 300+ Lbs
Constructed From Carbon Thermoplastic, Which Offers Strength, Low Weight, Durability, and a Great Appearance
Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1
Non-Invasive / Easy Install

Carbon front splitter kit.



Fits
Porsche 987.2 Cayman - 2009 to 2012 Gen 2 Only

Front splitters are very effective at producing front end downforce without increasing drag significantly. They do this by creating a large pressure delta between the top and bottom surfaces. We then incrementally improved the front splitter by adding design tweaks to the underside of the splitter to improve flow while working with the OE plastic underbody panels.

The splitter is produced from a carbon thermoplastic, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either. It is a great splitter material.

The air dam is used to bring the splitter flat with the vehicle's underbody and improve performance further. The air dam is produced with pre-preg carbon fiber and is cured in an autoclave for reduced weight and improved strength.

Kit Includes
• Carbon Front Air Dam
• Carbon Composite Front Splitter Blade
• Hardware Kit, Includes All Hardware Necessary for Install

Features
Greatly Increases Front End Downforce
Produces High Downforce for Large Rear Wings
Capable of Handling 300+ Lbs
Constructed From Carbon Thermoplastic, Which Offers Strength, Low Weight, Durability, and a Great Appearance
Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1
Non-Invasive Install

Specifications
Front Splitter is Manufactured From Carbon Thermoplastic, Offering Superior Strength, Weight, Durability, and Appearance to Many Other Options
Will Not Grab and Bend Surfaces Like Aluminum Units
Will Not Crack and Break Like Carbon and ABS Units
Abrasive Resistant While Stiff
Carbon Fiber Air Dam
Stainless Hardware Throughout
Aircraft Nut Plates Used in the Air Dam

Fog lamp covers with DRL lamps. Pair Left & Right.



Fits:
Porsche 987C Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

987631720

The product you are viewing cross references to these numbers

Fog lamp covers, Carbon. PAIR



Fits:
Porsche 987C Cayman

Material:
Carbon Fibre

Product Type:
Replica

Special order:  Please note it usually takes 8 weeks for us to receive this from supplier as this is special order part.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98750570000

The product you are viewing cross references to these numbers

Carbon fibre Front bumper and spoiler, manufactured in one piece.



Fits:
Porsche 981 Cayman GT4 2016

Upgrade the 981 Cayman GT4 style by replacing the oem plastic parts with more performing and eye catching carbon fiber parts with exposed carbon weave. Great Solution as a replacement and to lightweight your GT4.

Manufactured in carbon fiber prepreg autoclave molded at high temperature & pressure with twill 2×2 200 gr. fabric and final lacquering clearcote gloss 90.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC981505010

The product you are viewing cross references to these numbers

Original carbon SAR front chin spoiler. Extremly light for more downforce and a very sportive design. This includes 2 pieces, left and right made Carbon Fibre.

Fits:
Porsche 987C Cayman

Material:
Carbon

Product Type:
SpeedART

This is a SpeedART 2-piece SAR-front chin spoiler for the Cayman. It provides a more aggressive sport design with more downforce and adjustable flaps. This includes 2 pieces, left and right made of a high quality German fiberglass. Formerly known as the RS style. This piece adds on to the factory bumper.

Fits:
Porsche 987C Cayman

Material:
Made from Fiber Glass. GRP

Product Type:
SpeedART

The speedART SRS 3-Piece front spoiler adds on to the factory bumper. Based on the 2-Piece SAR front add-on(P87503001B), the SRS adds the center section creating a front diffusor to add downforce. Also availiable in real carbon. Formerly known as the RSR style. Made in high quality fiberglass.

Fits:
Porsche 987C Cayman

Material:
Made from Fiber Glass. GRP

Product Type:
SpeedART

Front bumper GT4 Style complete kit for cars WITHOUT headlamp washer.
Includes all grilles, mesh, lower lip spoiler, air ducts, number plate holder and fixings.

Material: PU Plastic

Fits:
For cars WITHOUT headlamp washer
WITHOUT parking sensor hole
Porsche 981 Cayman / 981 Boxster 2013-16




The Front Bumper GT4 Style Kit for Porsche 981 Cayman/Boxster is a versatile upgrade option designed to elevate the appearance and performance of your Porsche.

Enhanced Aerodynamics: The GT4 Style Kit is engineered to improve aerodynamics, enhancing the stability and handling of your Porsche.

Aggressive Styling: The kit features an aggressive, sporty design that gives your Porsche a distinct and eye-catching look.

Durable Material: Constructed from high-quality materials, this kit ensures longevity and resistance to wear and tear.

Compatibility: The kit is specifically designed for Porsche 981 Cayman/Boxster models, ensuring a seamless fit.

Please note:

If your car has front parking sensors the holes will need to be drilled in to the bumper before painting.

At Design911, we are committed to assisting you in finding the perfect Front Bumper GT4 Style Kit for your Porsche 981 Cayman/Boxster. Our team of experts is ready to provide professional advice to help you make an informed decision. Whether you prefer the precision of OEM or the affordability of aftermarket, we have the knowledge and resources to guide you. Contact us today, and let us transform your Porsche with the ideal Front Bumper GT4 Style Kit to meet your needs and preferences.

Please note: Delivery time is normally 6-8 weeks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98150531380

The product you are viewing cross references to these numbers

Front bumper GT4 Style complete kit for cars WITH headlamp washer.
Includes all grilles, mesh, lower lip spoiler, air ducts, number plate holder and fixings.



This is a top quality conversion kit 

Fits:
For cars WITH headlamp washer
WITHOUT parking sensor hole
Porsche 981 Cayman / 981 Boxster 2013-16


The Front Bumper GT4 Style Kit for Porsche 981 Cayman/Boxster is a versatile upgrade option designed to elevate the appearance and performance of your Porsche.

Enhanced Aerodynamics: The GT4 Style Kit is engineered to improve aerodynamics, enhancing the stability and handling of your Porsche.

Aggressive Styling: The kit features an aggressive, sporty design that gives your Porsche a distinct and eye-catching look.

Durable Material: Constructed from high-quality materials, this kit ensures longevity and resistance to wear and tear.

Compatibility: The kit is specifically designed for Porsche 981 Cayman/Boxster models, ensuring a seamless fit.

Please note:

If your car has front parking sensors the holes will need to be drilled in to the bumper before painting.

At Design911, we are committed to assisting you in finding the perfect Front Bumper GT4 Style Kit for your Porsche 981 Cayman/Boxster. Our team of experts is ready to provide professional advice to help you make an informed decision. Whether you prefer the precision of OEM or the affordability of aftermarket, we have the knowledge and resources to guide you. Contact us today, and let us transform your Porsche with the ideal Front Bumper GT4 Style Kit to meet your needs and preferences.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98150531381

The product you are viewing cross references to these numbers

Carbon fibre Front bumper lower spoiler, composed in n. 3 pieces : centre spoiler, side spoilers left and right. Glossy clear finish.



Fits:
Porsche 981 Cayman GT4 2016

Upgrade the 981 Cayman GT4 style by replacing the oem plastic parts with more performing and eye catching carbon fibre parts with exposed carbon weave. Great Solution as a replacement and to lightweight your GT4.

Manufactured in carbon fibre prepreg autoclave molded at high temperature & pressure with twill 2×2 200 gr. fabric and final lacquering clearcote gloss 90.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC981505525

The product you are viewing cross references to these numbers

Boxster 987 SpeedART CS front Bumper.
This bumper will also require 2 x 997 Carrera fog/drive lamps, which can be purchased as extra's

Fits:
Porsche Boxster 987
Porsche Cayman 987C

Material:
Made from Fiber Glass. GRP

Product Type:
SpeedART

Front Bumper & Lower Front Spoiler + RS Top Intake for:
Porsche Cayman 987 from 11/2005 for variant Roadster / Coupe
Porsche Boxster 987 from 2004 for variant Roadster / Coupe

• Vehicle TÜV approval, thus entry free
• Mounting hardware, if necessary
• installation Instructions

• Front Bumper & Front Lower spoiler is made of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

For the Lamps you will need CLICK HERE

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Front bumper for cars without headlamp washer.


Fits:
Porsche 981 Cayman GT4 2016>>
For cars without headlamp washer.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98150531380

The product you are viewing cross references to these numbers

Front bumper for cars with headlamp washer (288).


Fits:
Porsche 981 Cayman GT4 2016>>
For cars with headlamp washer (288)

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98150531381

The product you are viewing cross references to these numbers

Front Bumper & Lower Front Spoiler for:
Porsche Cayman 987 from 11/2005 for variant Roadster / Coupe
Porsche Boxster 987 from 2004 for variant Roadster / Coupe

• Vehicle TÜV approval, thus entry free
• Mounting hardware, if necessary
• installation Instructions

• Front Bumper & Front Lower spoiler is made of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

You will need: Fog Lamps (no. 98763108205, 98763108105)

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Carbon fibre Front number plate support.
Manufactured in Carbon Fibre prepreg autoclave molded cured with glossy clear finish.

Gives a unique eye catching look while maintaining the original style of 981.



Fits:
Porsche 981 Cayman GT4 2016


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC981701051

The product you are viewing cross references to these numbers

These aerodynamic elements with matt Aluminium Look finish are a stylish addition to the front of the Cayman or Cayman S.

 

Fits:
Porsche 987C Cayman

Front spoiler lip fit for Porsche 987 Cayman Year 2005-2009. Fits the model variant Coupé.

• Vehicle-specific TÜV parts certificate
• Includes mounting accessories, if required
• Includes assembly instructions
• Front spoiler lip is from high-quality materials and innovative
• Uniform surface structure allows painting without much preparatory work (Product is not painted)
• Material is flexible

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Front spoiler lip for Porsche 987 Cayman 2005-2009 for variant Coupe

• Vehicle TÜV approval, thus entry free
• Mounting hardware, if necessary
• installation Instructions

• Front spoiler lip is made of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Front Spoiler RS Xtreme



Fits:
Porsche 987C Cayman 2005>>

Material:
Made from Fibre Glass GRP
Covered with Carbon Fibre

Product Type:
Replica

Special order:  Please note it usually takes 8 weeks for us to receive this from supplier as this is special order part.

Lower spoiler for front bumper. 

Material: PU Plastic



Fits:
Porsche 981 GT4
Porsche 981 Cayman / 981 Boxster 2013-16 (with GT4 bodykit)





Please note: Delivery time is normally 6-8 weeks.

Lower spoiler for front bumper. 



Fits:
Porsche 981 GT4
Porsche 981 Cayman / 981 Boxster 2013-16 (with GT4 bodykit)


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

981505525801E0

The product you are viewing cross references to these numbers

Spoiler lip in matt Aluminium Look. These Aluminium-Look front spoiler lips lend added sporting style to the front appearance of the Cayman.



Fits:
Porsche 987C Cayman 2009-12

Note: The combination with exterior package in matt Aluminium Look is recommended.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98704480211

The product you are viewing cross references to these numbers

TechArt Front Spoiler I.

Add on front spoiler fits directly on to OE front bumper. Made from PU-RIM material.

Fits:
Porsche Cayman 987C 2005>>
Porsche Cayman S 987C 2005>>


Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

TechArt Front Spoiler II GTS.

Front part equipped with headlamp unit (fog lamps and high beam lamps), black front grill inserts and front flaps, carbon front splitter, carbon air outlet, and air intakes.

Fits:
Porsche Cayman 987C 2005>>
Porsche Cayman S 987C 2005>>

Options:
- Cars equipped with standard HALOGEN bulbs
- Cars equipped with XENON High Beam bulbs


Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

TechArt Front Spoiler II.

Front part equipped with headlamp unit (fog lamps and high beam lamps), black front grill inserts and front flaps, black front splitter and air intakes.

Fits:
Porsche Cayman 987C 2005>>
Porsche Cayman S 987C 2005>>

Options:
- Cars equipped with standard HALOGEN bulbs
- Cars equipped with XENON High Beam bulbs


Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.