防翻架

Roll cage 6 point bolt in with universal door bars.
For cars with sunroof



MSA/FIA homologated. Certificate 761 available from MSA

Fits
Porsche 911 - 1966 to 1973
Porsche 912 - 1966 to 1969

6 point bolt-in roll cage for universal door bars.
This clears normal trim and dashboard and mounts to the floor and rear wheel arches.
Rear roll cage section is available with different options.
For vehicles with sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Universal Door Bars
• Front cage for twin universal door bars
(Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Universal door bar (1 required per side)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in for Porsche 911 / 912 targa



MSA/FIA homologated. Certificate 783 available from MSA

Fits
Porsche 911 / 912 targa- 1968 to 1989

6 point bolt-in roll cage for single door bars.
This clears normal trim and dashboard and mounts to the floor and rear wheel arches. Uses the single, unique door bars.

Rear roll cage section is available with different options.
For targa models only

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in for cars without sunroof.



MSA/FIA homologated. Certificate 273 available from MSA

Fits
Porsche 911 - 1966 to 1973
Porsche 912 - 1966 to 1969

6 point bolt-in roll cage for single door bars.
This clears normal trim and dashboard and front cage
mounts to sills and rear cage mounts to sills and rear wheel arches. Single unique door bars.

Rear roll cage section is available with different options.
For vehicles WITHOUT sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish

Roll bar for cars with sunroof.
Porsche reference number: 90180301521



Fits:
Porsche 911 R / RS / ST / RSR 1964 - 1973
only for cars with sunroof

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90180301521

您正在查看的产品与这些编号存在交叉引用关系

Roll bar for cars without sunroof.
Porsche reference number: 90180301521



Fits:
For RHD cars
Porsche 911 R / RS / ST / RSR 1964 - 1973
only for cars without sunroof

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

IBP11.1.107

您正在查看的产品与这些编号存在交叉引用关系

Roll cage 6 point bolt in with single door bars.
For cars without sunroof. For Full 6 point harness you need to order Front and Rear.



Not for Competition Use

Fits
Porsche 911 - 1974 to 1989
Porsche 912 - 1976

6 point bolt-in roll cage for single door bars.
This clears normal trim and dashboard and mounts to the floor and rear wheel arches.
Rear roll cage section is available with different options.
For vehicles WITHOUT sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish

Bolt in roll cage for Porsche 911 models, The roll bar is a bolt in unit with no welding required, the installation hardware is also included. The roll cage is available with our without a centre harness bar.

Fits:
Porsche 911 1974-89 Coupe
With or without sunroof

Each roll cage is made to order and powder coated in a RAL colour. You can specify a RAL colour when ordering.
Delivery time is approx. 8 weeks. If you order specific colour which is uncommon the delivery time might be longer.
Standard colours: Black (RAL 9005), Red (RAL 3000 or RAL 3020), white (RAL 9016) or Yellow (RAL 1003 or RAL 1023)

For installation guide please CLICK HERE


Please visit http://www.ralcolor.com/ and let us know your desired colour.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P911RB

您正在查看的产品与这些编号存在交叉引用关系

Safety Devices 10 point bolt-in roll cage for Porsche 911 2 door, non-sunroof models. The Safety Devices 'P005' cage was designed for the Classic 911 from 1966 to 1973. It has also been used to fit the Porsche 912 with sunroof from 1965 to 1969. The cage clears original trim and dashboard without modifications. The front cage mounts to the floor and rear cage mounts to the floor and rear wheel arches, 4 additional mounts, 2 each side on the A pillars and 2 on the B pilars. The cage includes a transverse bar in the main hoop and pair of unique door bars, cage reinforcement plates and fasteners as required. Cages are supplied as standard with a satin black, powder coated finish. Image for illustration purposes - actual cage may differ slightly. MSA/FIA Homologated

Fits:
Porsche 911 1968-73 Coupe
With or without sunroof

Please Note: All roll cages can be ordered in bare metal at no extra charge or in various colours with an additional cost and due to their size most roll cages are shipped on a pallet. If you wish to order a non-standard roll cage or require shipping outside the UK mainland, please CONTACT US to discuss all your requirements.

One cage available, please review the details below and choose the cage option that best meets your requirements.

Roll Cage Options:
Front Cage + Rear Cage with Single Fixed Diagonal + Transverse Bar + Door Bars

MSA/FIA Homologated - Certificate No: 773

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P005

您正在查看的产品与这些编号存在交叉引用关系