Agency Power

Agency Power Carbon fiber PDK paddle shifters.



Fitment: 2009-2016 Porsche 987.2 Boxster/Cayman, 997.2 Carrera, 997.2 Turbo, 991 Carrera, 991 Turbo, 991 GT3/GT3RS, 958 Cayenne, 970 Panamera that have the factory Porsche Sport Design 2 Steering Wheel.

The Porsche PDK transmission is one of the smoothest and fastest shifting transmissions in the performance car world. Since its launch in 2009 on the 997.2 Carrera and the 987.2 Cayman/Boxster, the same PDK Sport Design steering wheel has been used through 2016. What makes the Sport Design 2 steering wheel the better option on these Porsche models is the driver interaction with the car. Having the ability to blast through the gears on the flappy paddle gearbox connects you to the pavement with split second shifts. As more and more cars loose the manual transmission in favor of a dual clutch setup like the PDK, drivers have to adapt to new driving methods. When you are shifting on the track or under pressure during straight line runs, grabbing gears with different hand positions can be difficult.

To enhance the driving experience, Agency Power has launched a complete line of Paddle Shifter Extensions for various vehicles. These particular paddle shifter extensions give you and your Porsche the ultimate in connection. The carbon fiber add-on shifters are designed to simply attach to the factory aluminum ones in seconds. They extend the top and bottom of the paddle shifter about 2 inches on either side. This allows for an improved ability to grab gears no matter where your hands are on the steering wheel. The shifters are designed to follow the curve of the steering wheel giving a seamless look as if they came from the factory. The carbon fiber weave with glossy clear coat finish is a perfect look for any interior. The paddle shifters are sold as a pair and attach with the supplied double sided tape. For those that want to enhance the look of their interior while improving the connectivity to their driving habits, the Agency Power Paddle Shifter extensions are the best choice!

Exterior Mirror Covers Carbon Fiber.

Fits:
These mirrors will fit the following vehicles from 2012-2015 with standard mirrors as pictured:

Porsche 991 Turbo
Porsche 991 Carrera and Carrera S
Porsche 991 Carrera 4 and Carrera 4S
Porsche 991 GT3
Porsche 981 Cayman or Boxster with same style mirrors

This carbon fiber mirror caps fit on to the Porsche 991 mirrors. The mirror caps are finished in a 1×1 carbon weave with a high gloss clear coat. The mirror caps fit against the black mirror moldings and along the indentation of the stock housing. Each mirror cap includes high strength double sided tape for a simple installation on to the stock mirrors. Carbon fiber has always been a stylish addition to any vehicle. These carbon mirror caps are sold as a pair and are finished in a gorgeous glossy finish. Each pair is hand made in the USA.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

AP991605

The product you are viewing cross references to these numbers

Race plenum and throttle body.



Fits:
Porsche 997 Turbo 2007-09

Adding bolt-on horsepower to the 997 Turbo is a continuous quest by many enthusiasts looking for more power. Reverting back to old tuning technologies, Agency Power has developed a larger throttle body and plenum kit for the Porsche 997 Turbo to gain added performance. The point of a larger throttle body is to get in more air.

The more air you bring in, the more power you make. The 997 Turbo's engine intake system works off pulses, so how that air is diverted to either side of the engine is not as important as the volume incoming. The plenum kit includes an OEM Porsche Cayenne Turbo throttle body (part# 94860511503) which is a direct bolt on and plug in for the electronic throttle control with no modifications needed.

This throttle body has a 77.64mm inner diameter compared to the stock one of 75.64mm. We chose to go with this smaller diameter throttle body to give the car more low end horsepower and torque. If the diameter of the throttle body is to big, it will increase turbo lag and performance gains will only be made at the mid to top end RPM range. Since most 997 Turbo users drive their car on the street and track, we developed this product to substantially increase throttle response and improve "usable" power.

The Agency Power plenum kit is made using high quality 6061 aluminum that has been TIG welded and pressure tested in a T shape to mimic the OEM design. The CNC machined 4 bolt throttle body flange features a groove to accompany a rubber o-ring to ensure a secure and sealed fit with the OEM Porsche Cayenne throttle body. The T plenum features the necessary fittings for stock vacuum hoses and breather lines and includes a 1 way check valve needed. Each T plenum is powder coated gloss black for an OEM look and includes new silicone couplers in black and worm clamps to secure it to the factory intake manifolds. The installation of the plenum requires removal of the factory airbox and Y pipe to access the component.

Installation of the Agency Power plenum kit DOES NOT require the ECU to be flashed. The factory ECU will adjust accordingly to the change in throttle body diameter. However, corresponding mods including an ECU flash will only bring out additional power. As it stands alone, the plenum kit will add a bolt on 20 wheel horsepower to your Porsche 997 Turbo. As tested on a VR700 kit, the plenum added nearly 45 horsepower and 60 ft/lbs of torque. Splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed.

Recommended installation time is approximately 3 hours.

HP Gains: 40-45Bhp. 60 ft/lbs of torque

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

AP-997TT-105

The product you are viewing cross references to these numbers