PFC

Replacement floating brake disc rotor, PFC Direct Drive V3, Slotted Road disc.

318mm diameter and thickness is 28mm
The radial depth is 60 mm

Fits:

• Porsche 911 996 Carrera / Carrera 4 1999 - 2004
• Porsche 911 997 Carrera / Carrera 4 2004 - 2011
• Porsche Boxster 986 S 1996 - 2004
• Porsche Boxster 987 2005 - 2012
• Porsche Cayman 987 R 2010 - 2012
• Porsche Cayman 987 S 2005 - 2012

Replacement brake disc for PFV Direct Drive V3

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

318.28.0061.4

The product you are viewing cross references to these numbers

Replacement Street Rear Brake Disc, Slotted Direct Drive V3
(Left OR Right).

380mm diameter and thickness is 30mm
The radial depth is 47mm
Brake disc only, does not include brake bell

This Product Fits:

Porsche 991 GT3 2012>>
Porsche 992 GT3
Porsche Cayman 981C GT4 2013>>
Porsche Cayman 718 GT4 

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

380.30.0065

The product you are viewing cross references to these numbers

Replacement floating brake disc rotor, PFC Direct Drive V3, Slotted Road disc.

350mm diameter and thickness is 34mm
The radial depth is 60 mm

Fits:

Porsche 996 2001-05 GT2 / GT3 / RS Front
Porsche 997 2005-10 GT3 / RS Front Steel discs
Replacement brake disc for PFV Direct Drive V3 350.068.63 and 350.068.64

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

350.34.0060.4

The product you are viewing cross references to these numbers

Performance Friction 447 Z-Rated brake pad set. Replacement OE part no 99335193901.



This Product Fits:

Porsche 928 S & S4 & GT 85 - 95 Front
Porsche 944 2.5 Turbo 87 - 91 Front
Porsche 964 3.6 Carrera RS 91 - 93 Front
Porsche 964 3.3 Turbo & Turbo S 88 - 91 Front
Porsche 968 3.0 Coupe Sport 91 - 95 Front
Porsche 993 3.6 Carrera & C4 93 - 97 Front
Porsche 993 3.8 Carrera & C4 95 - 97 Front
Porsche 993 3.6 Turbo & Turbo GT2 95 - 97 Rear
Porsche 993 3.8 Carrera RS & RSR 95 - 97 Rear
Porsche 993 GT2 & RSR (380 disc) 95 - 97 Rear

Z-Rated® – It’s quicker, it’s cooler and it’s patented. Every year hundreds of major championships around the world are won with PFC Z-Rated® calipers, Direct Drive™ discs and Carbon Metallic® pads. 

Z-Rated compound has been developed for fast road / track day applications. It provides more stopping power and increased fade resistance over the standard OE materials but retains the good qualities of the road pad i.e., low dusting and noise along with low wear rate.

• High performance compound, gained through competition pad developments
• Compound designed for low dusting qualities
• Several built-in noise suppression technologies
• Excellent disc conditioning, giving even transfer layer on disc to reduce uneven pad deposits.

Typical applications: This compound can be used in OE calipers or aftermarket brake kits in applications where an increase in performance is required over the standard OE friction material.

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0447.10

The product you are viewing cross references to these numbers

PFC Brake pads, Rear. for BMW E46 All models excluding M3 & E36



The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications.


Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0396.11

The product you are viewing cross references to these numbers

PFC brake pads, Rear. MINI Cooper S JCW



The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications.


Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1060.10

The product you are viewing cross references to these numbers

PFC replacement V2 slotted front brake disc for Porsche 997 GT3 Cup 

Replacement Street Front Brake Disc, Slotted Direct Drive V2
(Left OR Right)

378mm diameter and thickness is 32mm

Brake disc only, does not include brake bell

This Product Fits:

Porsche 997 GT3 Cup (tarmac)

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now.

With PFC’s two-piece floating Direct Drive disc assemblies, the disc flange floats in the fitting structure, allowing radial and axial expansion of the disc without being constrained by the hub or hat.  
Years of R&D and thousands of race miles have resulted in the development of PFC’s patented Direct Drive system

Direct Drive V2 is an integral drive in hat system and is a second generation disc mounting system designed to enhance the Z-Rated Big Brake kits by reducing the number of components and overall disc assembly weight.

Two-piece floating slotted Direct Drive V3 front iron disc PCCB conversion (including road centre-lock wheels).

Dimensions : 410 × 62 × 34 mm
Weight: 10.9 kg



This Product Fits:

Porsche 992 2021>> GT3 iron replacement
Porsche 992 2021>> GT3 iron replacement for PCCB

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns. When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

410.057.6

The product you are viewing cross references to these numbers

PERFORMANCE FRICTION Sprint Rear Brake Pad Set



This Product Fits:

Porsche 991 GT3 Cup (sprint). Not for use in official Porsche Carrera Cup championships.
Porsche Cayman GT4 Clubsport (FIA GT4 homologated)

Dimensions - 110 × 26 × 49mm
Pad thickness - 26mm
Rear ZR69 caliper race pad

The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you are driving a brand new Porsche or a vintage collectible, we have got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970 - 2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB)

Information about Racing Compound Characteristics

Information about Brake Pad Size

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

7969.11.26.44

The product you are viewing cross references to these numbers

PERFORMANCE FRICTION Sprint Front Brake Pad Set



This Product Fits:

Porsche 991 GT3 Cup (sprint). Not for use in official Porsche Carrera Cup championships.
Porsche Cayman GT4 Clubsport (FIA GT4 homologated)

Dimensions - 155 × 28 × 56 mm
Pad thickness - 28mm
Front ZR68 caliper race pad

The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you are driving a brand new Porsche or a vintage collectible, we have got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970 - 2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB)

Information about Racing Compound Characteristics

Information about Brake Pad Size

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

7968.11.28.44

The product you are viewing cross references to these numbers

Replacement Street Rear Brake Disc, Slotted Direct Drive V2/V3
(Left OR Right).



380mm diameter and thickness is 30mm
The radial depth is 47mm
Brake disc only, does not include brake bell

This Product Fits:

Porsche 991 GT3 Cup (sprint). Not for use in official Porsche Carrera Cup championships.
Porsche Cayman GT4 Clubsport (FIA GT4 homologated)

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

380.30.0047

The product you are viewing cross references to these numbers

Replacement Street Front Brake Disc, Slotted Direct Drive V2/V3
(Left OR Right).



380mm diameter and thickness is 32mm
Brake disc only, does not include brake bell

This Product Fits:

Porsche 991 GT3 Cup (sprint). Not for use in official Porsche Carrera Cup championships.
Porsche Cayman GT4 Clubsport (FIA GT4 homologated)

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns. When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

380.32.0054

The product you are viewing cross references to these numbers

Two-piece floating slotted Direct Drive V3 rear iron disc PCCB disc conversion (including road centre-lock wheels) .

Dimensions : 390 × 65 × 32 mm



This Product Fits:

Porsche 991 GT2 / GT2 RS 2012>>
Porsche 991 GT3 / GT3 RS / Turbo 2012>> incl 991.2
Porsche 981C Cayman GT4 2014>>
PCCB iron disc replacement

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

390.075.6

The product you are viewing cross references to these numbers

Two-piece floating slotted Direct Drive V3 front iron disc PCCB conversion (including road centre-lock wheels).

Dimensions : 410 × 62 × 34 mm



This Product Fits:

Porsche 991 GT2 / GT2 RS 2012>>
Porsche 991 GT3 / GT3 RS / Turbo 2012>> incl 991.2
Porsche 981C Cayman GT4 2014>>
PCCB iron disc replacement

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

410.069.6

The product you are viewing cross references to these numbers

PFC Racing Front and rear brake kit with Slotted trackday / race 405 x 34mm front and 380 x 30mm rear disc assemblies.



Fits:
Porsche 996 / 997 / 991 Turbo including PCCB
and some 4WD versions including Carrera 4 & 4S

Please send wheel fitment information before ordering. There can be clearance issues with some profiles.

PFC high performance brake kits include:
• Forged ZR95 6-piston front caliper (part no 95.405.290.365.11 / 95.405.290.365.12)
• Forged ZR96 4-piston rear caliper (part no 96.380.290.365.01 / 96.380.290.365.02)
• Front Direct Drive V3 discs on alloy hats (part no 405.069.63 / 405.069.64)
• Rear Direct Drive V3 discs on alloy hats (part no 380.067.63 / 380.067.64)
• Race-specification brake pads (FA 7995.11.22.44 / RA 7969.11.20.44)
• Hardware (part no 225.143.460.21 FA Bracket Kit / 130.288.120.21 RA Spacer Kit)
• Custom-engineered for race and track use
• Genuine race technology

PFC kits offer the best braking performance available, along with great looks!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0405.0002

The product you are viewing cross references to these numbers

PFC Racing Front and rear brake kit with Slotted trackday / race 405 x 34mm front and 380 x 30mm rear disc assemblies.



Fits:
Porsche 991 GT2 / GT3 including PCCB (2013-)
Porsche 981 Cayman GT4

Porsche 718 Cayman GT4

Please send wheel fitment information before ordering. There can be clearance issues with some profiles.

PFC high performance brake kits include:
• Forged ZR95 6-piston front caliper (part no 95.405.290.365.11 / 95.405.290.365.12)
• Forged ZR96 4-piston rear caliper (part no 96.380.290.365.01 / 96.380.290.365.02)
• Front Direct Drive V3 discs on alloy hats (part no 405.069.63 / 405.069.64)
• Rear Direct Drive V3 discs on alloy hats (part no 380.067.63 / 380.067.64)
• Race-specification brake pads (FA 7995.11.22.44 / RA 7969.11.20.44)
• Hardware (part no 120.125.300.21 FA Spacer Kit / 900.900.002.11 FA/RA Stud Kit)
• Custom-engineered for race and track use
• Genuine race technology

PFC kits offer the best braking performance available, along with great looks!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0405.0001

The product you are viewing cross references to these numbers

PFC Racing Front and rear brake kit with Slotted trackday / race 380 x 34mm front and 380 x 30mm rear disc assemblies.



Fits:
Porsche 996 / 997 2WD (2000>>)
Porsche 987.2 Boxster & Cayman
Porsche 981 Boxster & Cayman

Please send wheel fitment information before ordering. There can be clearance issues with some profiles.

PFC high performance brake kits include:
• Forged ZR95 6-piston front caliper (part no 95.405.290.365.11 / 95.405.290.365.12)
• Forged ZR96 4-piston rear caliper (part no 96.380.290.365.01 / 96.380.290.365.02)
• Front Direct Drive V3 discs on alloy hats (part no 380.067.631 / 380.067.641)
• Rear Direct Drive V3 discs on alloy hats (part no 380.067.63 / 380.067.64)
• Race-specification brake pads (FA 7995.11.22.44 / RA 7969.11.20.44)
• Hardware (part no 225.143.335.21 FA Bracket Kit / 130.288.120.21 RA Spacer Kit)
• Custom-engineered for race and track use
• Genuine race technology

PFC kits offer the best braking performance available, along with great looks!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0380.0003

The product you are viewing cross references to these numbers

PFC Racing Front and rear brake kit with Slotted trackday / race 380 x 34mm front and 380 x 30mm rear disc assemblies.



Fits:
Porsche 996 / 997 / 991 Turbo including PCCB
and some 4WD versions including Carrera 4 & 4S

Please send wheel fitment information before ordering. There can be clearance issues with some profiles.

PFC high performance brake kits include:
• Forged ZR95 6-piston front caliper
• Forged ZR96 4-piston rear caliper
• Front Direct Drive V3 discs on alloy hats (part no 380.069.63 / 380.069.64)
• Rear Direct Drive V3 discs on alloy hats (part no 380.067.63 / 380.067.64)
• Race-specification brake pads (FA 7995.11.22.44 / RA 7969.11.20.44)
• Hardware (part no 225.143.335.21 FA Bracket Kit / 130.288.120.21 RA Spacer Kit)
• Custom-engineered for race and track use
• Genuine race technology

PFC kits offer the best braking performance available, along with great looks!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0380.0002

The product you are viewing cross references to these numbers

PFC Racing Front and rear brake kit with Slotted trackday / race 380 x 34mm front and 380 x 30mm rear disc assemblies.



Fits:
Porsche 991 GT2 / GT3 including PCCB (2013-)
Porsche 981 Cayman GT4

Porsche 718 Cayman GT4

Please send wheel fitment information before ordering. There can be clearance issues with some profiles.

PFC high performance brake kits include:
• Forged ZR95 6-piston front caliper (part no 95.405.290.365.11 / 95.405.290.365.12)
• Forged ZR96 4-piston rear caliper (part no 96.380.290.365.01 / 96.380.290.365.02)
• Front Direct Drive V3 discs on alloy hats (part no 380.069.63 / 380.069.64)
• Rear Direct Drive V3 discs on alloy hats (part no 380.067.63 / 380.067.64)
• Race-specification brake pads (FA 7995.11.22.44 / RA 7969.11.20.44)
• Hardware (part no 900.900.002.11 FA/RA Stud Kit)
• Custom-engineered for race and track use
• Genuine race technology

PFC kits offer the best braking performance available, along with great looks!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0380.0001

The product you are viewing cross references to these numbers

Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).



Dimensions: 373 × 60 × 29 mm

This Product Fits:

Porsche 997 GT2 / GT3 / RS / Turbo 2005>>
Porsche 997 All Gen 2 cars 2011>>

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

373.076.6

The product you are viewing cross references to these numbers

PERFORMANCE FRICTION Fast Road Race Brake Pads For Porsche 1389.

PFB 08 Compound



This Product Fits:

Porsche 981 Boxster 2.7L / S 3.4L / GTS 3.4L 2012-16 (FRONT)
Porsche 982 (718) Boxster 2.0L / S 2.0L / T2.5L 2016>> (FRONT)

Porsche 981C Cayman 2.7L / S 3.4L / GTS 3.4L 2013-16 (FRONT) (steel brakes)
Porsche 982C (718C) Cayman 2.0L / S 2.0L / T2.5L 2016>> (FRONT)

Porsche 997.2 C2 / C4 3.6L 2009-12 (FRONT) incl Targa
Porsche 991.1 C2 / C4 3.4L 2012-16 (FRONT) incl Targa
Porsche 991.2 C2 / C4 3.0L 2015>>(FRONT) incl Targa
Porsche 991.2 GTS 3.0L 2017>> (FRONT)

The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you're driving a brand new Porsche or a vintage collectible, we've got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970 to 2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB)

Information about Racing Compound Characteristics

Information about  Brake Pad Size

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1389.08.17.44

The product you are viewing cross references to these numbers

Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).
Dimensions : 380 x 32 mm



This Product Fits:

Porsche 997.1 GT2 (2008 - 2009) - PCCB Rep
Porsche 997.2 GT2 RS (2011 - 2012) - PCCB Repl.
Porsche 997.1 GT3 / GT3 RS (2006 - 2009) - PCCB Repl.
Porsche 997.2 GT3 / GT3 RS / GT3 RS 4.0 (2010 - 2012) - Iron & PCCB Repl.
Porsche 997 GT3 Cup - with shape pad 0991
Centre-lock and 5-stud compatible


Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

379.067.6

The product you are viewing cross references to these numbers

Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).
Dimensions : 348 x 29mm



This Product Fits:

Porsche 997 GT3 CUP CAR ONLY

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

348.075.6

The product you are viewing cross references to these numbers

Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).
Dimensions : 378 x 32 mm



This Product Fits:

Porsche 997 GT3 CUP All Front
To be used with pad shape 7819

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

378.066.6

The product you are viewing cross references to these numbers

Dimensions : 194 x 18 x 65 mm



This Product Fits:

• Porsche Cayman 981C GT4 2015>> FRONT
• Porsche Cayman 718 GT4 FRONT
• Porsche Cayman 718 GT4RS FRONT
• Porsche 991 3.0 Carrera / Carrera S 2015>> FRONT
• Porsche 991 3.4 Carrera 2/4/Targa 2011-15 FRONT
• Porsche 991 3.8 Carrera S 2011-15 FRONT
• Porsche 991 GT3 / Turbo / Turbo S 2013>> FRONT

The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you're driving a brand new Porsche or a vintage collectible, we've got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970 - 2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB)

Information about Racing Compound Characteristics

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1773.

The product you are viewing cross references to these numbers

Dimensions : 173 x 17 x 66 mm



This Product Fits:

Porsche Cayman 981C GT4 2015>> REAR
Porsche Boxster 981 Spyder 2013>> REAR (steel brakes)
Porsche 991 2013>> Carrera 2 / 4 / Targa REAR (steel brakes)
Porsche 991 GT3 2013>> REAR (steel brakes)
Porsche 991 GT3RS 2015>> REAR (steel brakes)
Porsche 991 Turbo / Turbo S 2013>> REAR (steel brakes)

Porsche Cayman 718 GT4 REAR


The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you're driving a brand new Porsche or a vintage collectible, we've got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970 - 2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB)

Information about Racing Compound Characteristics

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

7727.

The product you are viewing cross references to these numbers

Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).
Two-piece floating slotted V3 rear iron disc upgrade
(including road centre-lock wheels).



These assemblies will replace the steel version with 380mm front and rear disc. From our information, the Porsche 981GT4 and 991GT3 with PCCB are 410mm front /390mm rear. PFC are working on replacement disc for PCCB cars.



Disc size : 380 mm x 30mm

Porsche 991 GT3 2012>>
Porsche 992 GT3
Porsche Cayman 981C GT4 2013>>

Porsche Cayman 718 GT4 
Not suitable as PCCB conversion 991G

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).
Two-piece floating slotted V3 front iron disc upgrade
(including road centre-lock wheels).



Disc size : 380 x 34 mm
These assemblies will replace the steel version with 380mm front and rear disc. From our information, the Porsche 981GT4 and 991GT3 with PCCB are 410mm front /390mm rear. PFC are working on replacement disc for PCCB cars.

This Product Fits:

Porsche 991 GT3 2012>>
Porsche Cayman 981C GT4 2014>>

Porsche Cayman 718 GT4 
Porsche GT3 RS
Not suitable as PCCB conversion 991G

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

380.070.6

The product you are viewing cross references to these numbers

Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).



Disc size 379mm

This Product Fits:

Porsche 997 MKII 2009-11 TURBO / GT2 Front
Porsche 991 2012-16 TURBO Front

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

379.069.6

The product you are viewing cross references to these numbers

Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).



350mm diameter and thickness is 34mm
The radial depth is 60 mm

This Product Fits:

Porsche 996 2001-05 GT2 / GT3 / RS Front
Porsche 997 2005-10 GT3 / RS Front Steel discs

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

350.068.6

The product you are viewing cross references to these numbers

Hat and Floating disc assembly kit, Direct Drive V3, Slotted Road discs (Left OR Right).



Disc size 330mm

This Product Fits:

Porsche 987 Boxster MKII Front
Porsche 987C Cayman MKII Front

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

330.067.6

The product you are viewing cross references to these numbers

PFC Fast Road & Race Rear Brake Pads BMW E46 3.2L M3, CSL

The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications.


Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0548.11

The product you are viewing cross references to these numbers

This Product Fits:

Porsche 997 Turbo 09>> Front
Porsche 997 GT3 09>> Front
Porsche 997 GT3 RS 09>> Front
Porsche 997 GT3 CUP 09>> Front

This brake pad comes with hole for sensor.

The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you`e driving a brand new Porsche or a vintage collectible, we`ve got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970 ? 2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB)

Information about Racing Compound Characteristics

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0991.

The product you are viewing cross references to these numbers

PERFORMANCE FRICTION Fast Road & Race Brake Pads For Porsche 0594 / E1842 / T5103. Replacement OE part no 99335194900.



This Product Fits:

Porsche 928 5.4 GTS 32V 91-95 Front
Porsche 964 3.3/3.6 Turbo/Turbo S Front
Porsche 968 3.0 Coupe Turbo S 93-95 Front
Porsche 993 3.6 Turbo/Turbo GT2 95-97 Front
Porsche 993 RS & RSR 95-97 Front

The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you`re driving a brand new Porsche or a vintage collectible, we`ve got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970 ? 2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB)

Information about Racing Compound Characteristics

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0594.

The product you are viewing cross references to these numbers

PERFORMANCE FRICTION Fast Road & Race Brake Pads For Porsche 0737 / E2407 / T5106. Replacement OE part no 98635193915.

PFB 08 Compound



This Product Fits:

Porsche 986 Boxster 2.5/2.7 97-05 Front
Porsche 987 Boxster 2.7 05>> Front

The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you?re driving a brand new Porsche or a vintage collectible, we?ve got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970 ? 2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB)

Information about Racing Compound Characteristics

Information about Brake Pad Size


Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0737.08.16.44

The product you are viewing cross references to these numbers

PERFORMANCE FRICTION Fast Road & Race Brake Pads For Porsche 0345 / E1203 / T0377. Replacement OE part no 96535293904 / 95135193908.



This Product Fits:

Porsche 911 3.3 SC Turbo & T. S 77 - 90 Front & Rear
Porsche 944 2.5 Turbo 85 - 87 Front & Rear
Porsche 944 2.7 & 3.0 S2 88 - 91 Front & Rear
Porsche 964 C2 3.6 88 - 91 Front
Porsche 964 C2 3.6 91 - 94 Front & Rear
Porsche 964 3.6 C4 88 - 94 Front & Rear
Porsche 968 3.0 Coupe 91 - 95 Front & Rear
Porsche 928 S & S4 & GT 85 - 95 Rear
Porsche 944 2.5 Turbo 87 - 91 Rear
Porsche 964 3.6 Carrera RS 91 - 93 Rear
Porsche 964 3.3 Turbo & Turbo S 88 - 91 Rear
Porsche 968 3.0 Coupe Sport 91 - 95 Rear
Porsche 993 3.6 Carrera & C4 93 - 97 Rear
Porsche 993 3.8 Carrera & C4 95 - 97 Rear
Porsche 928 5.4 GTS 32V 91 - 95 Rear
Porsche 964 3.3/3.6 Turbo/Turbo S Rear
Porsche 968 3.0 Coupe Turbo S 93 - 95 Rear


Ferrari 348 GTB, GTS Spider 89-94 Front & Rear
Ferrari 355 Berlinetta, GTS 94-99 Front & Rear
Ferrari 456 GT 94-96 Rear
Ferrari 512 TR (SOME) 92-94 Rear
Ferrari 512 Testarossa 92-96 Rear
Ferrari 512M Rear
Ferrari 550 Rear
Ferrari 575 M Maranello 02-06 Rear

Information about Racing Compound Characteristics

Information about Brake Pad Size

Sold as set of 4 pads for one axle.
The absolute best brakes on the market Performance Friction brakes are the standard of excellence in high-performance vehicles, and street vehicles.

Track days and street upgrades for nearly every make and model are manufactured to meet or exceed OE specifications. Whether you`re driving a brand new Porsche or a vintage collectible, we`ve got the brakes to fit your needs. Design 911 offer a wide range of Performance Friction brake pads for all Porsche models from 1970 - 2010, also in the program are a range of Two-piece floating street upgrade disc and replacement steel disc for cars with Porsche Ceramic Composite Brakes (PCCB).