H&R
About H&R
The year was 1980 – vehicle lowering was still completely unknown and a litre of gas cost only 1.15 DM.
H&R company founders Werner Heine and Heinrich Remmen had a great vision: performance enhancement by lowering road cars with homologation. A sensation for that time and a forerunner of today’s lowering with part approval.
The courageous young entrepreneurs soon realized that they had hit the mark with their project. Thanks to their ground-breaking idea, the company grew steadily into a well-established family business. Today, suspension components “Made by H&R” are deeply appreciated by Porsche customers all over the world.
H&R VTF Adjustable lowering spring kit. Porsche 991 Carrera 4 / Carrera 4S
Code: 23009-2
Set of Four VTF Adjustable Lowering Springs.
Not for cars with PDDC (Porsche Dynamic Chassis Control)
Fits
Porsche 991 Carrera 4
Porsche 991 Carrera 4S
Coupe, Cabriolet and Targa models
Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)
Approx. Front Lowering - 15mm to 35mm
Approx. Rear Lowering - 20mm to 40mm
These are the perfect answer for cars equipped with electronic shock absorbers.
Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.
H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
23009-2
The product you are viewing cross references to these numbers
Not for cars with PDDC (Porsche Dynamic Chassis Control)
Fits
Porsche 991 Carrera 4
Porsche 991 Carrera 4S
Coupe, Cabriolet and Targa models
Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)
Approx. Front Lowering - 15mm to 35mm
Approx. Rear Lowering - 20mm to 40mm
These are the perfect answer for cars equipped with electronic shock absorbers.
Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.
H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
23009-2
23009-2
99134353123504
99134353124504
99134353125504
99133353110504
99133353105504
99133353113504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
£1,317.97
Now £1,291.61
Orderable 
H&R VTF Adjustable lowering spring kit. Porsche 992 Carrera 2 / Carrera 4 / Carrera 2S / Carrera 4S
Code: 23020-1
Set of Four VTF Adjustable Lowering Springs.
Including cars with Front Axle Lift
Fits
Porsche 992 Carrera 2
Porsche 992 Carrera 2S
Porsche 992 Carrera 4
Porsche 992 Carrera 4S
2wd and 4wd Coupe, Cabriolet and Targa
Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)
Approx. Front Lowering - 30mm to 40mm
Approx. Rear Lowering - 25mm to 35mm
These are the perfect answer for cars equipped with electronic shock absorbers.
Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.
H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
23020-1
The product you are viewing cross references to these numbers
Including cars with Front Axle Lift
Fits
Porsche 992 Carrera 2
Porsche 992 Carrera 2S
Porsche 992 Carrera 4
Porsche 992 Carrera 4S
2wd and 4wd Coupe, Cabriolet and Targa
Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)
Approx. Front Lowering - 30mm to 40mm
Approx. Rear Lowering - 25mm to 35mm
These are the perfect answer for cars equipped with electronic shock absorbers.
Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.
H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
23020-1
23020-1
992511115504
992511115D504
992511115A504
992411105504
992411105A504
992411105B504
992411105C504
992411105K504
992411105AD504
992411105AE504
992411105L504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
£1,329.63
Now £1,303.04
Orderable
H&R VTF Adjustable lowering spring kit. Porsche 991 Carrera 2 / Carrera 2S
Code: 23009-1
Set of Four VTF Adjustable Lowering Springs.
Not for cars with PDDC (Porsche Dynamic Chassis Control)
Fits
Porsche 991 Carrera 2
Porsche 991 Carrera 2S
Coupe, Cabriolet and Targa models
Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)
Approx. Front Lowering - 15mm to 35mm
Approx. Rear Lowering - 20mm to 40mm
These are the perfect answer for cars equipped with electronic shock absorbers.
Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.
H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
23009-1
The product you are viewing cross references to these numbers
Not for cars with PDDC (Porsche Dynamic Chassis Control)
Fits
Porsche 991 Carrera 2
Porsche 991 Carrera 2S
Coupe, Cabriolet and Targa models
Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)
Approx. Front Lowering - 15mm to 35mm
Approx. Rear Lowering - 20mm to 40mm
These are the perfect answer for cars equipped with electronic shock absorbers.
Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.
H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
23009-1
23009-1
99134353106504
99134353110504
99133353110504
99133353105504
99133353113504
99134353126504
99134353130504
99134353125504
99134353131504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
£1,317.97
Now £1,291.61
Orderable
H&R VTF Adjustable lowering spring kit. Porsche 981 / 982 Boxster and Cayman
Code: 23006-1
Set of Four VTF Adjustable Lowering Springs for Boxster and Cayman
For cars with and without PASM
Fits
Porsche 981 Boxster / Cayman
Porsche 981 Boxster S / Cayman S
Porsche 982 (718) Boxster / Cayman
Porsche 982 (718) Boxster S / Cayman S
Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)
Approx. Front Lowering - 10mm to 25mm
Approx. Rear Lowering - 20mm
These are the perfect answer for cars equipped with electronic shock absorbers.
Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.
H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.
Only the front springs are adjustable on this kit
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
23006-1
The product you are viewing cross references to these numbers
For cars with and without PASM
Fits
Porsche 981 Boxster / Cayman
Porsche 981 Boxster S / Cayman S
Porsche 982 (718) Boxster / Cayman
Porsche 982 (718) Boxster S / Cayman S
Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)
Approx. Front Lowering - 10mm to 25mm
Approx. Rear Lowering - 20mm
These are the perfect answer for cars equipped with electronic shock absorbers.
Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.
H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.
Only the front springs are adjustable on this kit
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
23006-1
23006-1
98134353113504
98134353112504
98133353113504
98133353116504
98133353114504
98133353117504
98133353104504
98133353108504
982511115504
982511115A504
982511115B504
982511115C504
982511115J504
982511115K504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
£940.99
Now £922.17
Orderable
H&R VTF Adjustable lowering spring kit. Porsche 95B Macan
Code: 23001-2
Set of Four VTF Adjustable Lowering Springs for cars with PASM
Fits
Porsche Macan (95B, 95BN) 04/2014>> with PASM
WITHOUT Air Suspension
Height Adjustable Springs
for original shock absorbers with electronic damping (PASM)
Macan, S, turbo
Approx. Front Lowering - 40mm to 60mm
Approx. Rear Lowering - 30mm to 50mm
Macan, GTS
Approx. Front Lowering - 30mm to 50mm
Approx. Rear Lowering - 15mm to 35mm
H&R height adjustable spring systems combine standard shock absorbers with variable lowering. The electronic adjustment of adaptive shock absorbers
remains unrestricted and allows a choice between a comfortable or sporty suspension setup.
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
23001-2
The product you are viewing cross references to these numbers
Fits
Porsche Macan (95B, 95BN) 04/2014>> with PASM
WITHOUT Air Suspension
Height Adjustable Springs
for original shock absorbers with electronic damping (PASM)
Macan, S, turbo
Approx. Front Lowering - 40mm to 60mm
Approx. Rear Lowering - 30mm to 50mm
Macan, GTS
Approx. Front Lowering - 30mm to 50mm
Approx. Rear Lowering - 15mm to 35mm
H&R height adjustable spring systems combine standard shock absorbers with variable lowering. The electronic adjustment of adaptive shock absorbers
remains unrestricted and allows a choice between a comfortable or sporty suspension setup.
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
23001-2
23001-2
95B411105AK504
95B411105AL504
95B411105AM504
95B411105AN504
95B411105AP504
95B411105AQ504
95B411105AR504
95B411105AS504
95B411105BA504
95B411105BB504
95B411105BC504
95B511115E504
95B511115F504
95B511115G504
95B511115H504
95B511115J504
95B511115AD504
95B511115AE504
95B511115AF504
95B511115AG504
95B511115AH504
95B511115AJ504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Macan Petrol 2.0L V4 237Bhp
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan GTS Petrol 3.0L V6 360Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
- Porsche Macan Petrol 2.0L 245Bhp
- Porsche Macan S Petrol 3.0L V6 354Bhp
- Porsche Macan GTS Petrol 2.9L V6 380Bhp
- Porsche Macan Turbo 2.9L V6 440Bhp
£752.52
Now £737.47
In stock
H&R Lowering Springs. Porsche 911 (992) Turbo / Turbo S 2020>>
Code: 28628-1
H&R spring sets offer an inexpensive but high quality possibility to experience sportively by yourself.
Lowers car by: 20mm
Fits:
Porsche 911 (992) Turbo + Turbo S Coupé + Cabrio/ Convert. 2020>>
for vehicles with PASM suspension
for vehicles with sports suspension
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28628-1
The product you are viewing cross references to these numbers
Lowers car by: 20mm
Fits:
Porsche 911 (992) Turbo + Turbo S Coupé + Cabrio/ Convert. 2020>>
for vehicles with PASM suspension
for vehicles with sports suspension
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28628-1
28880-3
992511115D504
992411105G504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
£564.26
Now £552.97
In stock
H&R Lowering Springs. Porsche 971 Panamera Sport Turismo 4 / 4S
Code: 28648-1
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
Lowers car by: FRONT 30mm / REAR 30mm
Fits:
Porsche 971 Panamera Sport Turismo 4 / 4S, 4WD 2017>>
only with PASM sports suspension,
The Porsche Panamera Sport Turismo is the top class in terms of station wagons. And despite its inherently rock-solid sportiness you can go one step further when it comes to dynamics. Our sport spring kit, which lowers the centre of gravity by 30 millimetres on both axles.
excl. air suspension
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28648-1
The product you are viewing cross references to these numbers
Lowers car by: FRONT 30mm / REAR 30mm
Fits:
Porsche 971 Panamera Sport Turismo 4 / 4S, 4WD 2017>>
only with PASM sports suspension,
The Porsche Panamera Sport Turismo is the top class in terms of station wagons. And despite its inherently rock-solid sportiness you can go one step further when it comes to dynamics. Our sport spring kit, which lowers the centre of gravity by 30 millimetres on both axles.
excl. air suspension
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28648-1
28648-1
971411105504
971411105A504
971411105B504
971411105C504
971411105D504
971411105E504
971411105F504
971511115504
971511115A504
971511115B504
971511115C504
971511115D504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Panamera 4 3.0L Turbocharged V6 Sport Turismo
- Porsche Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo
- Porsche Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo
- Porsche Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo
£377.44
Now £369.89
Orderable
H&R lowering springs. Porsche 992 Carrera S / 4S
Code: 28652-1
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
Lowers car by: 1.5-2.0 inches on average
Fits:
Porsche 992 (911) Carrera 2S Cabrio / Coupe 2020>>
Porsche 992 (911) Carrera 4S Cabrio / Coupe 2020>>
* Incl. PASM
* Incl. Front End Lift
Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivaled tensile strength and resiliency.
H&R Sport Springs offer the handling characteristics and aggressive appearance that you've been looking for, without the harsh ride characteristics of less-advanced spring systems. H&R Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. H&R Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28652-1
The product you are viewing cross references to these numbers
Lowers car by: 1.5-2.0 inches on average
Fits:
Porsche 992 (911) Carrera 2S Cabrio / Coupe 2020>>
Porsche 992 (911) Carrera 4S Cabrio / Coupe 2020>>
* Incl. PASM
* Incl. Front End Lift
Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivaled tensile strength and resiliency.
H&R Sport Springs offer the handling characteristics and aggressive appearance that you've been looking for, without the harsh ride characteristics of less-advanced spring systems. H&R Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. H&R Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28652-1
28652-1
992511115A504
992511115D504
992411105B504
992411105C504
992411105K504
992411105AD504
992411105L504
992411105AE504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
£349.94
Now £342.94
In stock
H&R Adjustable Suspension kit. Porsche 981 Boxster / 981 Cayman
Code: 28743-1
H&R height adjustable coil overs are designed for every driver who wants to realize his sporty ambitions with superior technical suspension solutions.
Fits:
Porsche 981 Boxster / Boxster S , 2WD, 2012>> not for cars with PASM
Porsche 981 Cayman / Cayman S , 2WD, 2012>> not for cars with PASM
Lowers car by: FT 30-50mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28743-1
The product you are viewing cross references to these numbers
Fits:
Porsche 981 Boxster / Boxster S , 2WD, 2012>> not for cars with PASM
Porsche 981 Cayman / Cayman S , 2WD, 2012>> not for cars with PASM
Lowers car by: FT 30-50mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28743-1
28743-1
98134304104
98134304105
98134304109
98134304111
98134353113504
98133304105
98133304107
98133304109
98133304111
98133304113
98133353113504
98133353116504
98133353114504
98133353117504
98133304108
98133304110
98133304112
98133304114
98134304106
98134304110
98134304112
98134304114
The product you are viewing cross references to these numbers
Product Vehicle Group
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
£2,303.92
Now £2,257.84
Orderable
H&R Adjustable Suspension kit. Porsche 986 Boxster / S
Code: RSS-37-511-1/1
H&R height adjustable coil overs are designed for every driver who wants to realize his sporty ambitions with superior technical suspension solutions.
Fits:
Porsche 986 Boxster / Boxster S, 2WD, 10/1996>> with approval Clubsport
Lowers car by: FT 30-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-511-1
The product you are viewing cross references to these numbers
Fits:
Porsche 986 Boxster / Boxster S, 2WD, 10/1996>> with approval Clubsport
Lowers car by: FT 30-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-511-1
98634304102
98634304120
9863430414
98634304122
98634304123
98634353101504
98634353109504
98634353105504
98633305104
98633305106
98633305120
98633353104504
98633353134504
98633353105504
98633353120504
98633353138504
98633353139504
98633353121504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£1,949.37
Now £1,910.38
In stock
H&R Adjustable Suspension kit. Porsche 944 / 924S / 968
Code: RSS-37-827-2/1
H&R height adjustable coil overs are designed for every driver who wants to realize his sporty ambitions with superior technical suspension solutions.
Fits:
Porsche 944 / 924 / 968
incl. Cabrio,
with approval,
only for FA-inner lower strut mounting bracket opening = 20 mm inside!
only for cars with aluminum rear axle Clubsport
Lowers car by: FT 30-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-827-2
The product you are viewing cross references to these numbers
Fits:
Porsche 944 / 924 / 968
incl. Cabrio,
with approval,
only for FA-inner lower strut mounting bracket opening = 20 mm inside!
only for cars with aluminum rear axle Clubsport
Lowers car by: FT 30-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-827-2
94433303204
94434353104904
94434353109904
94434353113904
95134353103904
95134353105904
95133303205
94434303112
94434303212
94434303117
94434303217
95134303105
95134303205
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£2,430.77
Now £2,382.15
In stock
H&R Adjustable Suspension kit. Porsche 944 / 924S / 968
Code: RSS-37-827-1/1
H&R height adjustable coil overs are designed for every driver who wants to realize his sporty ambitions with superior technical suspension solutions.
Fits:
Porsche 944 incl. S / 924S / 968
incl. Cabrio,
with approval,
only for strut base FA-inner lower strut mounting bracket opening = 18 mm inside! (see picture)
only for cars with aluminum rear trailing arm Clubsport
Lowers car by: FT 230-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-827-1
The product you are viewing cross references to these numbers
Fits:
Porsche 944 incl. S / 924S / 968
incl. Cabrio,
with approval,
only for strut base FA-inner lower strut mounting bracket opening = 18 mm inside! (see picture)
only for cars with aluminum rear trailing arm Clubsport
Lowers car by: FT 230-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-827-1
94433303204
94434353104904
94434353109904
94434353113904
95134353103904
95134353105904
95133303205
94434303112
94434303212
94434303117
94434303217
95134303105
95134303205
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£2,430.77
Now £2,382.15
Orderable
H&R Adjustable Suspension kit. Porsche 996 TURBO 2000>>
Code: RSS-37-462-2/1
H&R height adjustable coil overs are designed for every driver who wants to realize his sporty ambitions with superior technical suspension solutions.
Fits:
Porsche 911 (996) Turbo, 4WD, with approval Clubsport
Lowers car by: FT 20-50mm / RR 20-40mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-462-2
The product you are viewing cross references to these numbers
Fits:
Porsche 911 (996) Turbo, 4WD, with approval Clubsport
Lowers car by: FT 20-50mm / RR 20-40mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-462-2
99633305117
99633305136
99633305155
99633305199
99633305137
99633305151
99633305166
9963335119504
99633353144504
99633353152504
99633353159504
99633353120504
99633353145504
99634304317
99634304342
99634304328
99634304349
99634353318504
99634353330504
99634353338504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 996 TURBO 2000-05
£2,694.63
Now £2,640.74
Orderable
H&R Adjustable Suspension kit. Porsche 996 C4
Code: RSS-37-462-1/1
H&R height adjustable coil overs are designed for every driver who wants to realize his sporty ambitions with superior technical suspension solutions.
Fits:
Porsche 911 (996) C4, 4WD, Carrera 4/4S with approval Clubsport
Lowers car by: FT 20-50mm / RR 20-40mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-462-1
The product you are viewing cross references to these numbers
Fits:
Porsche 911 (996) C4, 4WD, Carrera 4/4S with approval Clubsport
Lowers car by: FT 20-50mm / RR 20-40mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-462-1
99633305104
99633305143
99633305185
99633305121
99633305125
99633305133
99633305148
99633305162
99633305124
99633305128
99633305140
99633305146
99633305161
99633305130
99633305141
99633305153
99633305160
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
£2,549.63
Now £2,498.64
Orderable
H&R Adjustable Suspension kit. Porsche 996 C2 (Coupe/Cab)
Code: RSS-37-510-1/1
H&R height adjustable coil overs are designed for every driver who wants to realise his sporty ambitions with superior technical suspension solutions.
Fits:
Porsche 911 (996) C2, 2WD, Carrera 2 incl. Cabrio/Targa, with approval Clubsport
Lowers car by: FT 30-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-510-1
The product you are viewing cross references to these numbers
Fits:
Porsche 911 (996) C2, 2WD, Carrera 2 incl. Cabrio/Targa, with approval Clubsport
Lowers car by: FT 30-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-510-1
99634304104
99634304130
99634304139
99634304120
99634304123
99634304127
99634304136
99634353101504
99634353107504
99634353115504
99634353102504
99634353116504
99633305104
99633305143
99633305185
99633305121
99633305125
99633305133
99633305148
99633305162
99633353103504
99633353123504
99633353106504
99633353164504
99633353104504
99633353137504
99633353124504
99633353105504
99633353138504
99633353125504
99633353118504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
£2,549.63
Now £2,498.64
Orderable
H&R Adjustable Suspension kit. Porsche 993
Code: RSS-37-954-1/1
H&R height adjustable coil overs are designed for every driver who wants to realize his sporty ambitions with superior technical suspension solutions.
Fits:
Porsche 911 (993), 2WD, Carrera 2/2S, Carrera 4/4S, Cabrio/Targa, 911 Turbo, with approval Clubsport
Lowers car by: FT 30-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-954-1
The product you are viewing cross references to these numbers
Fits:
Porsche 911 (993), 2WD, Carrera 2/2S, Carrera 4/4S, Cabrio/Targa, 911 Turbo, with approval Clubsport
Lowers car by: FT 30-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
RSS-37-954-1
99333305100
99333305134
99333305200
99333305234
99333353102504
99333353104504
99333353103504
99333353109504
99333353116504
99333353125504
99333353123504
99334304103
99334304137
99334398001
99334304203
99334304237
99334398002
99334353100504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
£2,399.57
Now £2,351.58
Orderable
H&R Anti Roll Bar / Sway Bar Kit. Porsche 987 Boxster Spyder
Code: 33180-2
H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits.
Front & Rear Anti Roll Bar:
- Front - 26mm (not adjustable)
- Rear - 22mm (adjustable in 2 places)
Fits:
Porsche 987 Boxster Spyder 2009>>
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33180-2
The product you are viewing cross references to these numbers
Front & Rear Anti Roll Bar:
- Front - 26mm (not adjustable)
- Rear - 22mm (adjustable in 2 places)
Fits:
Porsche 987 Boxster Spyder 2009>>
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33180-2
33180-2
99734370108
98733370105
98733370102
99734370105
98733370103
98733370104
98733370107
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
£580.47
Now £568.86
Orderable
H&R Lowering Springs. Porsche 968
Code: 29875VA
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
Lowers car by: FRONT 30mm
Single spring supplied.
Please order a quantity of 2 for the front axle.
Fits:
Porsche 968 1992-95
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
29875VA
The product you are viewing cross references to these numbers
Lowers car by: FRONT 30mm
Single spring supplied.
Please order a quantity of 2 for the front axle.
Fits:
Porsche 968 1992-95
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
29875VA
29875VA
94434353104904
94434353109904
94434353113904
95134353105904
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£164.00
Now £160.72
In stock
H&R Lowering Spring. Porsche 9YA Cayenne (ETS) / 971 Panamera (ETS)
Code: 28952-2
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
For cars with air suspension (ETS)
Fits:
Lowers car by: 30mm
Porsche 9YA Cayenne 2018>>
Only for cars with air-suspension (ETS)
Lowers car by: 40mm
Porsche 971 Panamera 2017>>
Only for cars with air-suspension (ETS)
NOTE: Please state chassis-number by ordering.
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28952-2
The product you are viewing cross references to these numbers
For cars with air suspension (ETS)
Fits:
Lowers car by: 30mm
Porsche 9YA Cayenne 2018>>
Only for cars with air-suspension (ETS)
Lowers car by: 40mm
Porsche 971 Panamera 2017>>
Only for cars with air-suspension (ETS)
NOTE: Please state chassis-number by ordering.
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28952-2
28952-2
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Cayenne V6 3.0L Petrol 340Hp
- Porsche Cayenne Coupe V6 3.0L Petrol 340Hp
- Porsche Cayenne E-Hybrid V6 3.0L V6 340Hp
- Porsche Cayenne Coupe E-Hybrid V6 3.0L 340Hp
- Porsche Cayenne S V6 2.9L Petrol 440Hp
- Porsche Cayenne Coupe S V6 2.9L Petrol 440Hp
- Porsche Cayenne Turbo V8 4.0L Petrol 550Hp
- Porsche Cayenne Coupe Turbo V8 4.0L Petrol 550Hp
- Porsche Cayenne Turbo S E-Hybrid V8 4.0L 550Hp
- Porsche Cayenne Coupe Turbo S E-Hybrid V8 4.0L 550Hp
- Porsche Panamera V6 3.0L 2WD (330 Hp)
- Porsche Panamera 4 V6 3.0L 4WD (330 Hp)
- Porsche Panamera 4 V6 3.0L 4WD Executive
- Porsche Panamera 4 3.0L Turbocharged V6 Sport Turismo
- Porsche Panamera 4S V6 3.0L 4WD (440 Hp)
- Porsche Panamera 4S V6 3.0L 4WD Executive
- Porsche Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo
- Porsche Panamera 4S Diesel V8 4.0L 4WD (422 Hp)
- Porsche Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo
- Porsche Panamera 4 E-Hybrid V6 2.9L 4WD
- Porsche Panamera 4 E-Hybrid V6 2.9L 4WD Executive
- Porsche Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo
- Porsche Panamera Turbo V8 4.0L 4WD (550 Hp)
- Porsche Panamera Turbo V8 4.0L 4WD Executive
- Porsche Panamera Turbo 4.0L Twin-Turbo V8 Sport Turismo
- Porsche Panamera Turbo S E-Hybrid V8 4.0L 4WD
- Porsche Panamera Turbo S E-Hybrid V8 4.0L 4WD Executive
£1,903.35
Now £1,865.28
Orderable
H&R Lowering Springs. Porsche 9YA Cayenne / Cayenne S
Code: 28690-1
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
Lowers car by: FRONT 35mm / REAR30 mm
Fits:
Porsche 9YA Cayenne / Cayenne S 2017>>
For cars incl. PASM, without air suspension
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28690-1
The product you are viewing cross references to these numbers
Lowers car by: FRONT 35mm / REAR30 mm
Fits:
Porsche 9YA Cayenne / Cayenne S 2017>>
For cars incl. PASM, without air suspension
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28690-1
28690-1
95841110500504
PAB411105504
PAB411105A504
95841110505504
95841110510504
PAB411105B504
95841110515504
95841110555504
PAB411105H504
PAB411105G504
PAB411105F504
PAB411105E504
95841110560504
95841110565504
95841110570504
95841110575504
PAB411105D504
PAB411105J504
PAB411105K504
95851111500504
95851111510504
95851111515504
95851111520504
95851111525504
95851111550504
95851111555504
95851111560504
95851111565504
95851111570504
95851111575504
95851111580504
95851111585504
PAB511115E504
95851111590504
PAB511115AA504
PAB511115AB504
PAB511115AC504
PAB511115AD504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Cayenne V6 3.0L Petrol 340Hp
- Porsche Cayenne Coupe V6 3.0L Petrol 340Hp
- Porsche Cayenne S V6 2.9L Petrol 440Hp
- Porsche Cayenne Coupe S V6 2.9L Petrol 440Hp
£384.90
Now £377.20
In stock
H&R Lowering Springs. Porsche 987 Boxster Spyder
Code: 28905-1
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
Lowers car by: 20mm
Fits:
Porsche 987 Boxster Spyder 2009>>
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28905-1
The product you are viewing cross references to these numbers
Lowers car by: 20mm
Fits:
Porsche 987 Boxster Spyder 2009>>
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28905-1
29111-1
98733353180504
98733353195504
98734353140504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
£342.74
Now £335.89
In stock
H&R Lowering Springs. Porsche 993 C2/4/2S/4S 94-98 Lowers by 30mm
Code: 60953-1
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
Please note:
Vehicles fitted with load dependent brake control require separate approval despite of ABE (In countries where approval or the like is required). In any case set brake control to required level after lowering!
Lowers car by: 30mm
Fits:
Porsche 993 C2 / C2S 10/1993-1998
Porsche 993 C4 / C4S 10/1993-1998
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
60953-1
The product you are viewing cross references to these numbers
Please note:
Vehicles fitted with load dependent brake control require separate approval despite of ABE (In countries where approval or the like is required). In any case set brake control to required level after lowering!
Lowers car by: 30mm
Fits:
Porsche 993 C2 / C2S 10/1993-1998
Porsche 993 C4 / C4S 10/1993-1998
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
60953-1
60953-1
99333353102504
99333353104504
99333353103504
99333353109504
99334353100504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
£341.39
Now £334.56
In stock
H&R Lowering Springs. Volkswagen Scirocco III, Incl. DCC, 2008>>
Code: 29013-1
H&R Lowering Springs.
Code: 29013-1
Front Lowering: 35mm
Rear Lowering: 35mm
Fits:
VOLKSWAGEN SCIROCCO III TYPE 13, UP TO 1020KG FA LOAD, INCL. DCC, WITH ABE* (FROM AUG 2008 ONWARDS)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
29013-1
The product you are viewing cross references to these numbers
Code: 29013-1
Front Lowering: 35mm
Rear Lowering: 35mm
Fits:
VOLKSWAGEN SCIROCCO III TYPE 13, UP TO 1020KG FA LOAD, INCL. DCC, WITH ABE* (FROM AUG 2008 ONWARDS)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
29013-1
29013-1
290131
29013-1
The product you are viewing cross references to these numbers
Product Vehicle Group
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
£200.53
Now £196.52
Orderable
H&R Adjustable Suspension kit. Porsche 997 GT3 / GT3 RS
Code: 32997-1
H&R height adjustable coil overs are designed for every driver who wants to realize his sporty ambitions with superior technical suspension solutions.
Fits:
Porsche 997 GT3 / GT3 RS 03/2006>>>
Lowers car by: FT 10-30mm / RR 10-30mm
HA: incl. damping force adjustment,
RA: aluminum shocks with support bearings
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
32997-1
The product you are viewing cross references to these numbers
Fits:
Porsche 997 GT3 / GT3 RS 03/2006>>>
Lowers car by: FT 10-30mm / RR 10-30mm
HA: incl. damping force adjustment,
RA: aluminum shocks with support bearings
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
32997-1
32997-1
99734304192
99734304195
99734304197
99734304196
99634353195504
99634353194504
99733305191
99733305194
99733305195
99733305199
99733305183
99733305185
99733353191504
99733353193504
99733353195504
9973335319F504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
£4,485.49
Now £4,395.78
Orderable
H&R Anti Roll Bar / Sway Bar Kit. Porsche 981 Boxster / Cayman
Code: 33879-1
H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits.
Front & Rear Anti Roll Bar:
- Front - 28mm (not adjustable) requires bushes 99134379208
- Rear - 24mm (adjustable in 2 places)
Fits:
Porsche 981 Boxster / Boxster S 05/2012>>
Porsche 981 Cayman / Cayman S 05/2012>>
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33879-1
The product you are viewing cross references to these numbers
Front & Rear Anti Roll Bar:
- Front - 28mm (not adjustable) requires bushes 99134379208
- Rear - 24mm (adjustable in 2 places)
Fits:
Porsche 981 Boxster / Boxster S 05/2012>>
Porsche 981 Cayman / Cayman S 05/2012>>
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33879-1
33879-1
33879
338791
33879 1
99134370511
99134370515
98133370311
98133370310
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
£580.47
Now £568.86
In stock
H&R Anti Roll Bar / Sway Bar Kit. Porsche 991 Carrera 2 / Carrera 2S (F 28mm R 26mm)
Code: 33880-1
H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits.
Front & Rear Anti Roll Bar:
- Front - 28mm (not adjustable)
- Rear - 26mm (adjustable in 2 places)
Fits:
Porsche 991 Carrera 2 / Carrera 2S 2012>
Typ 991, 2WD, incl. Convertible
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33880-1
The product you are viewing cross references to these numbers
Front & Rear Anti Roll Bar:
- Front - 28mm (not adjustable)
- Rear - 26mm (adjustable in 2 places)
Fits:
Porsche 991 Carrera 2 / Carrera 2S 2012>
Typ 991, 2WD, incl. Convertible
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33880-1
33880-1
33880
338801
338801
99134370515
99133370511
99133370512
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
£645.08
Now £632.18
Orderable
H&R Anti Roll Bar / Sway Bar Kit. Porsche 997 C4/C4S/TURBO PDK (F 26mm R 24mm)
Code: 33239-5
H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits.
Front & Rear Anti Roll Bar:
- Front - 26mm (adjustable in 3 places)
- Rear - 24mm (adjustable in 4 places)
Please note: if bushes are not included with the kit this means you have to reuse your existing ones.
Fits:
Porsche 997, 4WD, Carrera 4 / Carrera 4S 11/2005>> Manual & Tiptonic
Porsche 997, 4WD, Carrera 4 / Carrera 4S 11/2008>>Facelift Mod.
ONLY PDK gearbox,
Porsche 997 Turbo 11/2005>>
ONLY PDK gearbox
without TÜV approval
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability.
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33239-5
The product you are viewing cross references to these numbers
Front & Rear Anti Roll Bar:
- Front - 26mm (adjustable in 3 places)
- Rear - 24mm (adjustable in 4 places)
Please note: if bushes are not included with the kit this means you have to reuse your existing ones.
Fits:
Porsche 997, 4WD, Carrera 4 / Carrera 4S 11/2005>> Manual & Tiptonic
Porsche 997, 4WD, Carrera 4 / Carrera 4S 11/2008>>Facelift Mod.
ONLY PDK gearbox,
Porsche 997 Turbo 11/2005>>
ONLY PDK gearbox
without TÜV approval
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability.
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33239-5
33239-5
33239
332395
33239 5
99733370114
99733370116
99734370305
99734370308
99733370303
99733370305
99734370310
99734370307
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII Turbo 2009>>
£623.54
Now £611.07
In stock
H&R Anti Roll Bar / Sway Bar Kit. Porsche 997 C2/S PDK (F 24mm R 24mm)
Code: 33239-4
H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits.
Front & Rear Anti Roll Bar:
- Front - 24mm (not adjustable)
- Rear - 24mm (adjustable in 4 places)
Please note: if bushes are not included with the kit this means you have to reuse your existing ones.
Fits:
Porsche 997 Carrera 2 / Carrera 2S 08/2004>>
Porsche 997 Carrera 2 / Carrera 2S Gen 2 but ONLY for PDK gearbox
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability.
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33239-4
The product you are viewing cross references to these numbers
Front & Rear Anti Roll Bar:
- Front - 24mm (not adjustable)
- Rear - 24mm (adjustable in 4 places)
Please note: if bushes are not included with the kit this means you have to reuse your existing ones.
Fits:
Porsche 997 Carrera 2 / Carrera 2S 08/2004>>
Porsche 997 Carrera 2 / Carrera 2S Gen 2 but ONLY for PDK gearbox
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability.
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33239-4
33239-4
33239
332394
33239 4
99734370107
99734370108
99734370104
99734370103
99734370105
99733370114
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
£623.54
Now £611.07
In stock
H&R Lowering Spring. Porsche Macan (ETS)
Code: 28804-1
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
For cars with air suspension (ETS)
Lowers car by: 35mm
Fits:
Porsche Macan Typ 95B 2014>>
Only for cars with air-suspension (ETS)
NOTE: Please state chassis-number by ordering.
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28804-1
The product you are viewing cross references to these numbers
For cars with air suspension (ETS)
Lowers car by: 35mm
Fits:
Porsche Macan Typ 95B 2014>>
Only for cars with air-suspension (ETS)
NOTE: Please state chassis-number by ordering.
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28804-1
29244-2
292442
29244 2
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Macan Petrol 2.0L V4 237Bhp
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
£1,810.99
Now £1,774.77
Orderable
H&R Lowering Springs. Porsche Macan S / Diesel / Turbo * without PASM
Code: 28788-2
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
Lowers car by: 40mm
Fits:
Porsche Macan S / Macan S Diesel / Macan Turbo 2014>>
Typ 95B, only without PASM, only for cars with steel suspension
Porsche Macan / Macan S / Macan Turbo 2019>>
only without PASM
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28788-2
The product you are viewing cross references to these numbers
Lowers car by: 40mm
Fits:
Porsche Macan S / Macan S Diesel / Macan Turbo 2014>>
Typ 95B, only without PASM, only for cars with steel suspension
Porsche Macan / Macan S / Macan Turbo 2019>>
only without PASM
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28788-2
28788-2
287882
28788
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
- Porsche Macan Petrol 2.0L 245Bhp
- Porsche Macan S Petrol 3.0L V6 354Bhp
- Porsche Macan Turbo 2.9L V6 440Bhp
- Porsche Macan Petrol 2.0L 265Bhp
- Porsche Macan T Petrol 2.0L 265Bhp
- Porsche Macan S Petrol 2.9L V6 380Bhp
£333.09
Now £326.43
Arriving soon
H&R Lowering Springs. Porsche Macan S / Diesel / Turbo * with PASM
Code: 28788-1
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
Lowers car by: 40mm
Fits:
Porsche Macan S / Macan S Diesel / Macan Turbo 2014>>
Typ 95B, only with PASM, only for cars with steel suspension
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28788-1
The product you are viewing cross references to these numbers
Lowers car by: 40mm
Fits:
Porsche Macan S / Macan S Diesel / Macan Turbo 2014>>
Typ 95B, only with PASM, only for cars with steel suspension
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28788-1
28788-1
287881
28788
95B511115E504
95B411105AS504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
£333.09
Now £326.43
In stock
H&R Lowering Springs. Porsche 911 (991) 4WD Turbo / Turbo S 2013>>
Code: 28880-3
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
Lowers car by: 30-35mm
Fits:
Porsche 911 (991) 4WD Turbo / Turbo S 2013>>
Coupe & Convertible, type 991, including cars with PASM.
Porsche 911 (991) 4WD Turbo / Turbo S 2016>>
Coupe & Convertible, type 991, including cars with PASM and Lift System.
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28880-3
The product you are viewing cross references to these numbers
Lowers car by: 30-35mm
Fits:
Porsche 911 (991) 4WD Turbo / Turbo S 2013>>
Coupe & Convertible, type 991, including cars with PASM.
Porsche 911 (991) 4WD Turbo / Turbo S 2016>>
Coupe & Convertible, type 991, including cars with PASM and Lift System.
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28880-3
28880-3
99133353116504
99133353112504
99134353122504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£280.25
Now £274.64
In stock
H&R Anti Roll Bar / Sway Bar Kit. Porsche 991 C4 / C4S
Code: 33880-2
H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits.
Front & Rear Anti Roll Bar:
- Front - 28mm (not adjustable)
- Rear - 26mm (adjustable in 2 places)
Fits:
Porsche 991 Carrera 4 / Carrera 4S 2012>
Typ 991, 4WD, incl. Convertible
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33880-2
The product you are viewing cross references to these numbers
Front & Rear Anti Roll Bar:
- Front - 28mm (not adjustable)
- Rear - 26mm (adjustable in 2 places)
Fits:
Porsche 991 Carrera 4 / Carrera 4S 2012>
Typ 991, 4WD, incl. Convertible
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33880-2
33880
338802
33880-2
99134370515
99133370511
99133370512
99133370513
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
£645.08
Now £632.18
In stock
H&R Lowering Springs. Porsche 981/982 Boxster/Cayman
Code: 28865-1
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
Fits:
Lowers car by: 25mm
Porsche 981 Boxster / Boxster S 05/2012>> for cars with PASM and without PASM, without sport suspension
Lowers car by: 30mm
Porsche 982 (718) Boxster / Boxster S 2016>> also for cars with PASM and without PASM, without sport suspension
Lowers car by: 35mm
Porsche 981 Cayman / Cayman S 05/2012>> also for cars with PASM and without PASM, without sport suspension
Lowers car by: 30mm
Porsche 982 (718) Cayman / Cayman S 2016>> also for cars with PASM and without PASM, without sport suspension
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28865-1
The product you are viewing cross references to these numbers
Fits:
Lowers car by: 25mm
Porsche 981 Boxster / Boxster S 05/2012>> for cars with PASM and without PASM, without sport suspension
Lowers car by: 30mm
Porsche 982 (718) Boxster / Boxster S 2016>> also for cars with PASM and without PASM, without sport suspension
Lowers car by: 35mm
Porsche 981 Cayman / Cayman S 05/2012>> also for cars with PASM and without PASM, without sport suspension
Lowers car by: 30mm
Porsche 982 (718) Cayman / Cayman S 2016>> also for cars with PASM and without PASM, without sport suspension
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28865-1
28865-1
98134353113504
98134353112504
98133353113504
98133353114504
98133353104504
98133353108504
98133353116504
98133353117504
98133353118504
98133353119504
982411105504
982411105A504
982511115504
982511115A504
982511115B504
982511115C504
982511115D504
982511115E504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
£259.40
Now £254.21
In stock
H&R Lowering Springs. Porsche 991 4WD Carrera + Carrera S / 991 GTS 2WD
Code: 28880-2
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
Fits:
Lowers car by: 25mm
Porsche 991 4WD Carrera + Carrera S
Coupe & Convertible, type 991, including cars with PASM
Lowers car by: 20-25mm
Porsche 911 (991) GTS 2014>>
Typ 991, 2WD, GTS Convertible,
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28880-2
The product you are viewing cross references to these numbers
Fits:
Lowers car by: 25mm
Porsche 991 4WD Carrera + Carrera S
Coupe & Convertible, type 991, including cars with PASM
Lowers car by: 20-25mm
Porsche 911 (991) GTS 2014>>
Typ 991, 2WD, GTS Convertible,
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28880-2
28880-2
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
£280.25
Now £274.64
In stock
H&R Lowering Springs. Porsche 991 2WD Carrera + Carrera S
Code: 28880-1
H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
Lowers car by: 30mm
Fits:
Porsche 991 2WD Carrera + Carrera S
Coupe & Convertible, type 991, including cars with PASM and without PASM
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28880-1
The product you are viewing cross references to these numbers
Lowers car by: 30mm
Fits:
Porsche 991 2WD Carrera + Carrera S
Coupe & Convertible, type 991, including cars with PASM and without PASM
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
28880-1
28880-1
99134353106504
99134353110504
99133353110504
99133353105504
99133353113504
99134353123504
99134353124504
99134353125504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
£280.25
Now £274.64
In stock
H&R Anti Roll Bar / Sway Bar Kit. Porsche 965 TURBO / 964 C2 Factory Wide Body (F 24mm R 26mm)
Code: 33835-1
H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits.
Front & Rear Anti Roll Bar:
- Front - 24mm (adjustable in 2 places)
- Rear - 26mm (adjustable in 2 places)
Fits:
Porsche 965 Turbo 2WD 1991>> not for Tiptronic
Porsche 964 Carrera 2, 2WD 1989>> not for Tiptronic CAR FACTORY BUILT WIDE BODY (1775mm)
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Front & Rear Anti Roll Bar:
- Front - 24mm (adjustable in 2 places)
- Rear - 26mm (adjustable in 2 places)
Fits:
Porsche 965 Turbo 2WD 1991>> not for Tiptronic
Porsche 964 Carrera 2, 2WD 1989>> not for Tiptronic CAR FACTORY BUILT WIDE BODY (1775mm)
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Product Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
£623.54
Now £611.07
In stock
H&R Cup-Kit Sport Suspension. Porsche 955 Cayenne / 557 Cayenne
Code: 31056-1
Fits:
Porsche 955 Cayenne / 955 Cayenne S 2003>>
Porsche 957 Cayenne / 957 Cayenne S / 957 Cayenne Diesel 2007>>
Please Note: Only for cars WITHOUT air-suspension.
Lowers car by: FT 70-80mm / RR 70-80mm
H&R Cup Kits consist of specially made springs and shocks-designed and engineered together-they provide optimal suspension damping and better control. H&R Cup Kits make a cohesive suspension package that outperforms and is more comfortable than separate off-the-shelf performance suspension components.
Designed and produced in H&R's ISO certified manufacturing facility in Germany, H&R Cup Kits are 100% German-made.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
31056-1
31056-1
310561
95534304300
95534304400
95534304311
95534304411
95534304312
95534304412
95534353303504
95534353304504
95534353305504
95534353306504
95533353103504
95533353104504
95533353105504
95533353106504
95533353107504
95533353108504
95533305100
95533305101
95533305111
95533305112
95534353310504
95534353311504
95534353320504
95534353321504
95534353331504
95534353340504
95534353341504
95534353351504
95534353360504
95534353361504
95534353370504
95534353371504
95534353380504
95534353381504
95534353390504
95534353395504
95534353400
95534304340
95534304350
95534304370
95534304440
95534304450
95534304470
95533353110504
95533353111504
95533353112504
95533353113504
95533353120504
95533353121504
95533353130504
95533353131504
95533305130
95533305131
95533305140
95533305141
95533305150
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne 3.0L Diesel 2007>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
£2,565.87
Now £2,514.55
Orderable
H&R Cup-Kit Sport Suspension. Porsche 996 C2 Targa / Cabrio
Code: 40513-2
Fits:
Porsche 996 C2 2WD Targa/Cabrio 1997>>
Please Note: Not for cars with Bilstein OEM sport suspension.
Lowers car by: FT 30mm / RR 30mm
H&R Cup Kits consist of specially made springs and shocks-designed and engineered together-they provide optimal suspension damping and better control. H&R Cup Kits make a cohesive suspension package that outperforms and is more comfortable than separate off-the-shelf performance suspension components.
Designed and produced in H&R's ISO certified manufacturing facility in Germany, H&R Cup Kits are 100% German-made.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
40513-2
40513-2
405132
9963435310254
99634353107504
99634353116504
99633305104
99633305143
99633305185
99633305121
99633305125
99633305133
99633305148
99633305162
99634304104
99634304130
99634304139
99634304120
99634304123
99634304127
99634304136
99633353104504
99633353137504
99633353124504
99633353105504
99633353138504
99633353125504
99633353118504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
£1,472.77
Now £1,443.31
Orderable
H&R Cup-Kit Sport Suspension. Porsche 996 C2 Coupe
Code: 40513-1
Fits:
Porsche 996 C2 2WD Coupe 1997>>
Lowers car by: FT 30mm / RR 30mm
H&R Cup Kits consist of specially made springs and shocks-designed and engineered together-they provide optimal suspension damping and better control. H&R Cup Kits make a cohesive suspension package that outperforms and is more comfortable than separate off-the-shelf performance suspension components.
Designed and produced in H&R's ISO certified manufacturing facility in Germany, H&R Cup Kits are 100% German-made.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
40513-1
40513-1
405131
99633305104
99633305143
99633305185
99633305121
99633305125
99633305133
99633305148
99633305162
99634304104
99634304130
99634304139
99634304120
99634304123
99634304127
99634304136
99633353103504
99633353136504
99633353123504
99633353104504
99633353137504
99633353124504
99634353101504
99634353107504
99634353115504
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
£1,472.77
Now £1,443.31
Orderable
