Koblenz

AutoBlip Intelligent downshift Device. 
For manual gearboxes only



Fits:
Porsche 986 Boxster - 1997 to 2004
Porsche 987 Boxster / Cayman - 2005 to 2012
Porsche 981 Boxster / Cayman - 2012 to 2016
Porsche 996 - 1997 to 2004
Porsche 997 - 2005 to 2012
Porsche 991 - 2012 to 2019

Product Description
AUTO-BLiP automatically blips (opens) the throttle when downshifting gears on a car equipped with a manual transmission and an electronic accelerator pedal system. This allows the driver to focus 100% on braking while simultaneously downshifting gears.

Reduces mechanical wear and tear on manual transmissions and improves vehicle stability when downshifting gears.

Simply put, better brake control combined with optimum engine drive equals faster lap times.

AUTO-BLiP Intelligent Downshift Device features:

• Simple connection to your vehicle’s existing sensors. The AUTO-BLiP connects directly to your vehicles throttle pedal position sensor (TPPS), brake pedal switch, and clutch safety interlock switch.
• On-the-fly tuning capability made easy via the two face plate mounted dials. By simply turning the dial labeled “DURATION”, the user is able to set the desirable RPM blip level. The “DELAY” dial allows for the addition of a constant time delay from the time a downshift event is sensed to when the unit generates the throttle blip event.
• Simple one-time calibration routine for easy interface to your vehicle’s OEM sensors. Once AUTO-BLiP has been properly installed to your vehicle, a six step calibration routine allows it to learn your vehicle’s throttle, brake, and clutch configuration.
• Four LEDs display the unit’s functional status. The AUTO-BLiP provides the user with a simple and easy to view status of the brake pedal, clutch pedal, and blip events.
• On/Off button mode. By simply toggling the On/Off face plate mounted button, the unit will toggle between the active blip mode and a bypass low power mode.
• Will not interfere with your vehicles on-board diagnostics. The AUTO-BLiP has been designed to work with your vehicle’s OEM electronics without causing any engine fault codes
• Auto power down mode. The AUTO-BLiP will automatically go into bypass low power mode after 6 hours inactivity.

Centre filler conversion kit "Singer Style" - Left Hand Drive (LHD)



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Backdate center filler conversion-kit for Porsche 964 / 993

This "Singer Style" center filler kit allows fuel filling through the center of the bonnet while closed. The fuel filler neck and base is attached to the included strut brace and connected to the fuel line connection of the standard fuel tank. The front fender tank cap opening in the can therefore be blinded like in Porsche racing cars or the "964 Singer Porsche". With this solution, the TÜV approval is also retained.

The tank cap is available in polished, natural or black anodized finish. It is also lockable. The decorative cap with integrated "Fuel" lettering is attached to the also included lockable tank cap with magnets.

A twin rainwater drain hose and the included sealing profile prevent rainwater from building up in the tank bowl or even getting into the trunk.

The position of the tank cap in the hood can be adjusted in height and inclination in all directions using various options.

All required mounting materials and illustrated installation instructions are included.

Installation instructions:
The original filler neck from the front fender must either be glued or welded into the filler pipe provided. When gluing, make sure that it is a high-quality and petrol-resistant adhesive. We recommend welding it.
The original tank must be treated with heat on one side and deformed using the contained tool.

Compatibility:
This center fueling system can be installed in all Porsche 964 and 993 models that have an original tank with one of the following part numbers: 96420102100 / 96420102104 / 99320102100.

For all other tanks with the part numbers 96420128700 and 96420102102, further modifications to the vehicle by the customer are necessary and direct installation is not possible.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TKZ56

The product you are viewing cross references to these numbers

GT3 RS door pull straps. 
Left and Right door pull straps



Fits:
Porsche 992 GT3 RS

We are the only supplier to provide a full set of pull strap colors for the  GT3RS Door Pulls.

Race inspired GT3RS door pull restrap. Since Porsche only gives you three color options for the RS strap (silver, red, and black) we have released these other colour options. You are only purchasing a pair of colored straps (2 pcs).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992837020

The product you are viewing cross references to these numbers

GT3 RS style door pull conversion kit.
Left and Right door pulls 



Fits:
Porsche 992
Porsche 992 turbo

We are the only supplier to provide a full set of pull strap colorways and on OEM Porsche GT3RS Door Pulls.

Race inspired GT3RS door pull straps conversion kit.  

Saves weight by replacing the standard 992 door levers with RS Pull Straps. These come in your choice of Lizard Green, Racing Yellow, Shark Blue, Guards Red, Silver-Grey, Black Silver, Truffle Brown, Ruby Red and more.

Comes with a complete OEM factory set to convert your 992 levers into RS spec, for both the driver and passenger side assemblies.  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992837019

The product you are viewing cross references to these numbers

Adjustable accelerator pedal extension. 
Fits LHD or RHD



Fits:
Porsche 911 - 1975 to 1989
Porsche 964 - 1989 to 1994 
Porsche 993 - 1994 to 1997
Porsche 996 - 1997 to 2005
Porsche 986 - 1997 to 2004
Porsche 944 - 1982 to 1991
Porsche 968 - 1992 to 1995
Porsche 928 - 1978 to 1995

the third foot™ is a fully adjustable extension for the accelerator in your classic Porsche. 

This adjustability solves the depth issue between your brake and accelerator pedals, enabling effortless heel/toe shifting and eliminating the possibility of catching your foot on the brake when transitioning from the gas. 

• Six-way adjustability enables complete driver customization
• Retains and clamps to stock gas pedal for easy installation and removal
• Made in USA with high-quality CNC machined aircraft aluminum  

Available in Black or Silver finish

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96442311101

The product you are viewing cross references to these numbers

Adjustable accelerator pedal extension. 
Fits LHD or RHD



Fits:
Porsche 911 - 1965 to 1975

the third foot™ is a fully adjustable extension for the accelerator in your classic Porsche. 

This adjustability solves the depth issue between your brake and accelerator pedals, enabling effortless heel/toe shifting and eliminating the possibility of catching your foot on the brake when transitioning from the gas. 

• Six-way adjustability enables complete driver customization
• Retains and clamps to stock gas pedal for easy installation and removal
• Made in USA with high-quality CNC machined aircraft aluminum  

Available in Black or Silver finish

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90142301001

The product you are viewing cross references to these numbers

Wheel cap RS logo carbon Fibre - Early Style

SET OF 4



Fits:
Porsche 997.2 GT3 RS
Porsche 997.2 GT2 RS
Porsche 991.1 / 991.2 GT3 RS
Porsche 991.2 GT2 RS
Porsche 992 GT3 RS
Porsche 718 Cayman GT4 RS 

Premium Carbon Fiber Center Cap Covers for Porsche Center Lock Wheels
Experience superior performance and aesthetic elegance with our Carbon Fiber Center Cap Covers.
Meticulously crafted for a wide range of Porsche models with Center Lock Wheels. 
Tailor-made to offer improved tolerances, these caps are an indispensable upgrade for rigorous track use.

Constructed from chemical and heat-resistant CFRP, each cap is encapsulated in UV-resistant epoxy and hand-polished to a high-gloss mirror finish. The upgraded silicone seals ensure a robust and secure fit, ensuring durability without compromising on style. These won't fall off at the track like the Porsche OEM ones are known to do. 

Key Features:
Highest quality pre-preg carbon fiber outer skin
One minute install time per wheel (4 minutes total)
Enhanced tolerances for optimal safety during intensive track use
Manufactured from high-grade, heat and chemically resistant CFRP
Upgraded silicone seals for a firm, secure fit
UV-resistant epoxy finish for extended durability
Hand-polished for an impeccable high-gloss mirror finish

Beloved by Porsche connoisseurs worldwide, our Carbon Fiber Center Cap Covers enhance your Porsche driving experience and allow you to customise your Porsche without voiding the warranty, damaging the paint or even getting your hands dirty. 

You can even take these with you to your next Porsche GT car. Simply remove, put your original Porsche center caps back on and then fit these carbon caps to your next Porsche GT car. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99736120791

The product you are viewing cross references to these numbers

Gear lever knob shift kit Singer look - DLS Style Black 
Black sleeve through gear knob



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

This conversion kit is an optimal addition to every backdate project and all 964/993 owners who strive for the "Singer look" for their vehicle.

The shift knob impresses with its high-quality appearance and workmanship. 

Kit Includes:

• Shift knob with engraved 5-speed or 6-speed schemes and metal trim ring
• Gaiter
• Shift cup

100% Plug & Play
This kit can be easily mounted and replaces the standard lever with boot, with modifications needed. 
A reversion to the factory components is guaranteed at any time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96442407578

The product you are viewing cross references to these numbers

Gear lever knob shift kit Singer look - DLS Style White
White sleeve through gear knob



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

This conversion kit is an optimal addition to every backdate project and all 964/993 owners who strive for the "Singer look" for their vehicle.

The shift knob impresses with its high-quality appearance and workmanship. 

Kit Includes:

• Shift knob with engraved 5-speed or 6-speed schemes and metal trim ring
• Gaiter
• Shift cup

100% Plug & Play
This kit can be easily mounted and replaces the standard lever with boot, with modifications needed. 
A reversion to the factory components is guaranteed at any time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96442407577

The product you are viewing cross references to these numbers

Gear lever knob shift kit Singer look - DLS Style Exclusive.
White sleeve through gear knob



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

This conversion kit is an optimal addition to every backdate project and all 964/993 owners who strive for the "Singer look" for their vehicle.

The shift knob impresses with its high-quality appearance and workmanship. This "Exclusive" version has been upgraded with a metal trim ring

Kit Includes:

• Shift knob with engraved 5-speed or 6-speed schemes and metal trim ring
• Gaiter
• Shift cup

100% Plug & Play
This kit can be easily mounted and replaces the standard lever with boot, with modifications needed. 
A reversion to the factory components is guaranteed at any time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96442407576

The product you are viewing cross references to these numbers

Gear lever knob shift kit Singer look - DLS Style Exclusive.
Black sleeve through gear knob



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

This conversion kit is an optimal addition to every backdate project and all 964/993 owners who strive for the "Singer look" for their vehicle.

The shift knob impresses with its high-quality appearance and workmanship. This "Exclusive" version has been upgraded with a metal trim ring

Kit Includes:

• Shift knob with engraved 5-speed or 6-speed schemes and metal trim ring
• Gaiter
• Shift cup

100% Plug & Play
This kit can be easily mounted and replaces the standard lever with boot, with modifications needed. 
A reversion to the factory components is guaranteed at any time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96442407574

The product you are viewing cross references to these numbers

Gear lever knob shift kit Singer look - 917 Style Exclusive 



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

This conversion kit is an optimal addition to every backdate project and all 964/993 owners who strive for the "Singer look" for their vehicle.

The shift knob impresses with its high-quality appearance and workmanship. This "Exclusive" version has been upgraded with a metal trim ring

Kit Includes:

• Shift knob with engraved 5-speed or 6-speed schemes and metal trim ring
• Gaiter
• Shift cup

100% Plug & Play
This kit can be easily mounted and replaces the standard lever with boot, with modifications needed. 
A reversion to the factory components is guaranteed at any time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96442407575

The product you are viewing cross references to these numbers

Gear lever knob shift kit Singer look - Modern  Line. 



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

This conversion kit is an optimal addition to every backdate project and all 964/993 owners who strive for the "Singer look" for their vehicle.

The shift knob impresses with its high-quality appearance and workmanship. 

Kit Includes:

• Shift knob with engraved 5-speed or 6-speed schemes and metal trim ring
• Gaiter
• Shift cup

100% Plug & Play
This kit can be easily mounted and replaces the standard lever with boot, with modifications needed. 
A reversion to the factory components is guaranteed at any time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96442407571

The product you are viewing cross references to these numbers

Gear lever knob shift kit Singer look - Classic Line. 



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

This conversion kit is an optimal addition to every backdate project and all 964/993 owners who strive for the "Singer look" for their vehicle.

The shift knob impresses with its high-quality appearance and workmanship. 

Kit Includes:

• Shift knob with engraved 5-speed or 6-speed schemes and metal trim ring
• Gaiter
• Shift cup

100% Plug & Play
This kit can be easily mounted and replaces the standard lever with boot, with modifications needed. 
A reversion to the factory components is guaranteed at any time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96442407570

The product you are viewing cross references to these numbers

Gear lever knob shift kit Singer look - Classic Line Exclusive



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

This conversion kit is an optimal addition to every backdate project and all 964/993 owners who strive for the "Singer look" for their vehicle.

The shift knob impresses with its high-quality appearance and workmanship. This "Exclusive" version has been upgraded with a metal trim ring

Kit Includes:

• Shift knob with engraved 5-speed or 6-speed schemes and metal trim ring
• Gaiter
• Shift cup

100% Plug & Play
This kit can be easily mounted and replaces the standard lever with boot, with modifications needed. 
A reversion to the factory components is guaranteed at any time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96442407572

The product you are viewing cross references to these numbers

Lightweight front 5mm Plexiglass door window, GREY TINT.



Fits:
Porsche 911 - 1969 to 1989 Coupe
Porsche 911 (930) turbo 1975 to 1977
Porsche 964 - 1989 to 1994 Coupe
Porsche 993 - 1994 to 1998 Coupe

Lightweight front door window - made from Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.
Fits all 911 / 964 / 993 Coupe standard doors or racing doors which use the standard window frame.
Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90154210

The product you are viewing cross references to these numbers

Lightweight front 5mm Plexiglass door window, BLUE TINT.



Fits:
Porsche 911 - 1969 to 1989 Coupe
Porsche 911 (930) turbo 1975 to 1977
Porsche 964 - 1989 to 1994 Coupe
Porsche 993 - 1994 to 1998 Coupe

Lightweight front door window - made from Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.
Fits all 911 / 964 / 993 Coupe standard doors or racing doors which use the standard window frame.
Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90154210

The product you are viewing cross references to these numbers

Lightweight front 5mm Plexiglass door window, Clear



Fits:
Porsche 911 - 1969 to 1989 Coupe
Porsche 911 (930) turbo 1975 to 1977
Porsche 964 - 1989 to 1994 Coupe
Porsche 993 - 1994 to 1998 Coupe

Lightweight front door window - made from Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.
Fits all 911 / 964 / 993 Coupe standard doors or racing doors which use the standard window frame.
Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90154210

The product you are viewing cross references to these numbers

Lightweight front 5mm Plexiglass door window, GREEN TINT



Fits:
Porsche 911 - 1969 to 1989 Coupe
Porsche 911 (930) turbo 1975 to 1977
Porsche 964 - 1989 to 1994 Coupe
Porsche 993 - 1994 to 1998 Coupe

Lightweight front door window - made from Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.
Fits all 911 / 964 / 993 Coupe standard doors or racing doors which use the standard window frame.
Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90154210

The product you are viewing cross references to these numbers

Lightweight rear 5mm Plexiglass window, 
Without hole for rear wiper



Fits:
Porsche 964 1989 to 1994 Coupe
Porsche 993 - 1994 to 1998 Coupe

Lightweight rear window - made from Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.

Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99354510713

The product you are viewing cross references to these numbers

Lightweight rear 5mm Plexiglass window, 



Fits:
Porsche 911 - 1965 to 1989 Coupe
Porsche 911 (930) turbo 1978 to 1989

Lightweight rear window - made from Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.

Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 32

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115451050

The product you are viewing cross references to these numbers

Lightweight rear 5mm Plexiglass 1/4 window, GREY TINT
Fixed rear window



Fits:
Porsche 911 - 1978 to 1989 Coupe
Porsche 911 (930) turbo 1978 to 1989
Porsche 964 - 1989 to 1994 Coupe
Porsche 993 - Coupe - 1994 to 1998

Lightweight rear quarter light window - made from Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.

Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91154310

The product you are viewing cross references to these numbers

Lightweight rear 5mm Plexiglass 1/4 window, BLUE TINT
Fixed rear window



Fits:
Porsche 911 - 1978 to 1989 Coupe
Porsche 911 (930) turbo 1978 to 1989
Porsche 964 - 1989 to 1994 Coupe
Porsche 993 - Coupe - 1994 to 1998

Lightweight rear quarter light window - made from Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.

Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91154310

The product you are viewing cross references to these numbers

Lightweight rear 5mm Plexiglass 1/4 window, Clear.
Fixed rear window



Fits:
Porsche 911 - 1978 to 1989 Coupe
Porsche 911 (930) turbo 1978 to 1989
Porsche 964 - 1989 to 1994 Coupe
Porsche 993 - Coupe - 1994 to 1998

Lightweight rear quarter light window - made from Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.

Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91154310

The product you are viewing cross references to these numbers

Lightweight rear 5mm Plexiglass 1/4 window, GREEN TINT
Fixed rear window



Fits:
Porsche 911 - 1978 to 1989 Coupe
Porsche 911 (930) turbo 1978 to 1989
Porsche 964 - 1989 to 1994 Coupe
Porsche 993 - Coupe - 1994 to 1998

Lightweight rear quarter light window - made from Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.

Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91154310

The product you are viewing cross references to these numbers

Lightweight front 5mm Plexiglass 1/4 window, Grey Tint



Fits:
Porsche 911 - 1969 to 1989 Coupe
Porsche 911 (930) turbo 1975 to 1977
Porsche 964 - 1989 to 1994 Coupe
Porsche 993 - 1994 to 1998 Coupe

Lightweight front quarterlight door window - made from 5mm Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.
Fits all 911 / 964 / 993 Coupe standard doors or racing doors which use the standard window frame.
Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91154251

The product you are viewing cross references to these numbers

Lightweight front 5mm Plexiglass 1/4 window, Blue Tint



Fits:
Porsche 911 - 1969 to 1989 Coupe
Porsche 911 (930) turbo 1975 to 1977
Porsche 964 - 1989 to 1994 Coupe
Porsche 993 - 1994 to 1998 Coupe

Lightweight front quarterlight door window - made from 5mm Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.
Fits all 911 / 964 / 993 Coupe standard doors or racing doors which use the standard window frame.
Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91154251

The product you are viewing cross references to these numbers

Lightweight front 5mm Plexiglass 1/4 window, Clear



Fits:
Porsche 911 - 1969 to 1989 Coupe
Porsche 911 (930) turbo 1975 to 1977
Porsche 964 - 1989 to 1994 Coupe
Porsche 993 - 1994 to 1998 Coupe

Lightweight front quarterlight door window - made from 5mm Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.
Fits all 911 / 964 / 993 Coupe standard doors or racing doors which use the standard window frame.
Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91154251

The product you are viewing cross references to these numbers

Lightweight front 5mm Plexiglass 1/4 window, GREEN TINT



Fits:
Porsche 911 - 1969 to 1989 Coupe
Porsche 911 (930) turbo 1975 to 1977
Porsche 964 - 1989 to 1994 Coupe
Porsche 993 - 1994 to 1998 Coupe

Lightweight front quarterlight door window - made from Plexiglas.
Over 2 axes thermo formed and tempered for perfect shape. These come with polished edges, are scratch resistant and UV protected.
Available with 5 mm thickness in clear, green, grey and blue tinted.
Fits all 911 / 964 / 993 Coupe standard doors or racing doors which use the standard window frame.
Made in Germany.

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91154251

The product you are viewing cross references to these numbers

Fixed position rear spoiler rams, the height can be manually adjustable. 

Fits:
Porsche 997 turbo - 2007 to 2012

Replace the often faulty, rear spoiler hydraulic rams with these fixed and adjustable spoiler mounts.

Made from 6061 billet aluminium these mounts are adjustable from fully down to a rise of 4 inches, in increments of 0.5 inch
Easily and quickly adjustable in a couple of minuets

Kit includes:
Instructions to disable OEM spoiler rams 
Left and Right fixed spoiler mounts 
Stainless steel hardware kit

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751295100

The product you are viewing cross references to these numbers

Aero disc rear wheel. 
Available in Matt or Gloss carbon fibre



Fits:
Porsche 992 GT3 - 2019 Onwards
Only for OEM wheels

Premium Carbon fiber aero discs are aerodynamic wheel covers for the Porsche 992 GT3.

These improve the airflow around the rear of the car and make your rear wing work better. Some say you can reduce the wing angle by 2 degrees and fit these and still keep the same downforce numbers.

The covers help to manage the airflow around the rear wing, reducing vortices and drag, therefore offering an improvement to the aero efficiency and looks at the same time. A perfect marriage of form and function.

Weighing in at only 180 grams each, the wheel covers are made by hand from prepreg carbon of the highest quality. Using composite molds and baked to perfection. Our mounting structure is made out of carbon prepreg that is lightweight but gives the structures the rigidity they need and then some. They are hand sanded and polished to a mirror like shine. We then protect them with a UV resistant epoxy that is backed by our 5 year warranty against cracking and yellowing. No questions asked.

We supply all sets with titanium bolts and all mounting and wheel protection hardware.

Key Features:

• Hand made from the highest quality pre-preg carbon fiber
• Improved design and aesthetics
• Enhanced aerodynamic performance
• Titanium bolts included
• Included PPF Pre-Cuts and Nylon wheel shields  to protect wheels
• 30 minute install time per side (1 hour total)
• Easily reversible process

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT601025

The product you are viewing cross references to these numbers

Headlamp lens SMOKED cover set with holder. Porsche 911 / 964



Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994

Acrylic covers protect expensive headlights from stone chips and pitting. They mount easily without any drilling and are virtually invisible.
The Set will come complete incl. mounting parts and is available in 3 different versions: Clear, Yellow and Black.

Sold as a Set (Right and Left). Fits on all 911 and 964 models from 1965-1994.
Installation instructions are included.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163196411B

The product you are viewing cross references to these numbers

Headlamp lens YELLOW cover set with holder. Porsche 911 / 964



Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994

Acrylic covers protect expensive headlights from stone chips and pitting. They mount easily without any drilling and are virtually invisible.
The Set will come complete incl. mounting parts and is available in 3 different versions: Clear, Yellow and Black.

Sold as a Set (Right and Left). Fits on all 911 and 964 models from 1965-1994.
Installation instructions are included.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163196411Y

The product you are viewing cross references to these numbers

Swan neck rear spoiler end plates carbon fibre. 
Sold as a pair



Fits:
Porsche 992 GT3
Available in Gloss or Matt finish

Premium Carbon fiber wing endplate covers for the Porsche 992 GT3

Weighing in at only 140 grams each these end plates are made by hand from prepreg carbon of the highest quality, using high temperature molds and baked to perfection. Our inner clip structure is made out of CFRP and is an exact replica of the original units.  We then protect them with a UV resistant epoxy that is backed by our 5 year warranty against cracking and yellowing. No questions asked. 

Installed in 1 minute per side and completely reversible. A full user manual is included in the hand crafted box they come in, with all the steps described in great detail with illustrations. The OEM endplates are easily removed with zero use of force, and once the new endplates are mounted the procedure can be easily reversed if you ever decide to do so. 

Key Features:

• Hand made from the highest quality pre-preg carbon fiber
• Exact fit and finish of OEM units
• UV protected
• One minute install per side
• Hand sanded and polished to a mirror like shine.
• Easily reversible process

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT827685

The product you are viewing cross references to these numbers

Rear wing end plates carbon fibre. 
Sold as a pair



Fits:
Porsche 992 GT3 - 2019 onwards

Premium Carbon fiber wing endplates for the Porsche 992 GT3.

We reimagined the design of the rear end of the 992 GT3 and the OEM plastic wing endplates are an easy first upgrade for your GT3. Over 30% larger for improved aero efficiency yet 50% lighter than the OEM units, the lift-to-drag ratio is improved with the larger surface area of the endplates under the leading edge of the rear wing. 

The larger endplates help to manage the airflow around the rear wing, reducing vortices and drag, therefore offering an improvement to the aero efficiency and looks at the same time. Our design builds on the OEM units by correcting two important lines, the first is the rear ducktail wing and the other one spills into the rear arches and window. A perfect marriage of form and function.

Weighing in at only 150 grams each. The endplates are made by hand from prepreg carbon of the highest quality. Using aluminium molds and baked to perfection. Our inner skeleton structure is made out of CFRP that is light weight but gives the hollow structures the rigidity they need and then some. They are hand sanded and polished to a mirror like shine. We then protect them with a UV resistant epoxy that is backed by our 5 year warranty against cracking and yellowing. No questions asked.

We supply all sets with the same adhesive Porsche uses from the factory (3M VHB)
We also include a small bottle of primer liquid from 3M, that will further improve the bond of your Porsches new wings. A full user manual is included in the hand crafted box they come in, with all the steps described in great detail with illustrations. The OEM endplates are easily removed with zero use of force, and once the new Ångström endplates are mounted the procedure can be easily reversed if you ever decide to do so. 

Key Features:

• Hand made from the highest quality pre-preg carbon fiber
• Laminated with a skeleton manufactured from high-grade, heat and chemically resistant CFRP
• Improved design and aesthetics
• Larger surface area reducing vortices
• Enhanced aerodynamic performance
• Use OEM adhesion method (3M VHB™)
  
• 30 minute install time per side (1 hour total)
• Easily reversible process

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT827867

The product you are viewing cross references to these numbers

Wheel cap GT3 logo carbon Fibre. 

SET OF 4



Fits:
Porsche 997.2 GT3 
Porsche 991.1 / 991.2 GT3 
Porsche 992 GT3 

Premium Carbon Fiber Center Cap Covers for Porsche Center Lock Wheels

Experience superior performance and aesthetic elegance with our Carbon Fiber Center Cap Covers.
Meticulously crafted for a wide range of Porsche models with Center Lock Wheels. 
Tailor-made to offer improved tolerances, these caps are an indispensable upgrade for rigorous track use.

Constructed from chemical and heat-resistant CFRP, each cap is encapsulated in UV-resistant epoxy and hand-polished to a high-gloss mirror finish. The upgraded silicone seals ensure a robust and secure fit, ensuring durability without compromising on style. These won't fall off at the track like the Porsche OEM ones are known to do. 

Key Features:
Highest quality pre-preg carbon fiber outer skin
One minute install time per wheel (4 minutes total)
Enhanced tolerances for optimal safety during intensive track use
Manufactured from high-grade, heat and chemically resistant CFRP
Upgraded silicone seals for a firm, secure fit
UV-resistant epoxy finish for extended durability
Hand-polished for an impeccable high-gloss mirror finish

Beloved by Porsche connoisseurs worldwide, our Carbon Fiber Center Cap Covers enhance your Porsche driving experience and allow you to customise your Porsche without voiding the warranty, damaging the paint or even getting your hands dirty. 

You can even take these with you to your next Porsche GT car. Simply remove, put your original Porsche center caps back on and then fit these carbon caps to your next Porsche GT car. 

Image shows RS version

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99736120703

The product you are viewing cross references to these numbers

Wheel cap RS logo carbon Fibre - Late Type

SET OF 4



Fits:
Porsche 997.2 GT3 RS
Porsche 997.2 GT2 RS
Porsche 991.1 / 991.2 GT3 RS
Porsche 991.2 GT2 RS
Porsche 992 GT3 RS
Porsche 718 Cayman GT4 RS 

Premium Carbon Fiber Center Cap Covers for Porsche Center Lock Wheels
Experience superior performance and aesthetic elegance with our Carbon Fiber Center Cap Covers.
Meticulously crafted for a wide range of Porsche models with Center Lock Wheels. 
Tailor-made to offer improved tolerances, these caps are an indispensable upgrade for rigorous track use.

Constructed from chemical and heat-resistant CFRP, each cap is encapsulated in UV-resistant epoxy and hand-polished to a high-gloss mirror finish. The upgraded silicone seals ensure a robust and secure fit, ensuring durability without compromising on style. These won't fall off at the track like the Porsche OEM ones are known to do. 

Key Features:
Highest quality pre-preg carbon fiber outer skin
One minute install time per wheel (4 minutes total)
Enhanced tolerances for optimal safety during intensive track use
Manufactured from high-grade, heat and chemically resistant CFRP
Upgraded silicone seals for a firm, secure fit
UV-resistant epoxy finish for extended durability
Hand-polished for an impeccable high-gloss mirror finish

Beloved by Porsche connoisseurs worldwide, our Carbon Fiber Center Cap Covers enhance your Porsche driving experience and allow you to customise your Porsche without voiding the warranty, damaging the paint or even getting your hands dirty. 

You can even take these with you to your next Porsche GT car. Simply remove, put your original Porsche center caps back on and then fit these carbon caps to your next Porsche GT car. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99736120791

The product you are viewing cross references to these numbers

Magnetic PDK paddle shifter set for Sport Design Steering Wheel. 

Fits:
Porsche 971.1 Panamera - 2017 to 2020
Porsche 9YA Cayenne - 2018 Onwards

GT3 RS Style Aluminum Paddles - These will not fit OEM Paddle Shifter units

The Magnetic Paddle Shifter System is manufactured from CNC machined 6061-T Grade Hard Anodized Billet Aluminum cage, Neodymium Magnet, and high-strength integrated 4mm-thick Carbon Fiber plates. 
These magnetic paddle shifters will bring you a significantly aggressive driving experience with our engineered design. This system has been designed explicitly with the Porsche Sport Design Steering Wheel, providing outstanding fitment and true plug & play installations. The shifters are track oriented and are built to make it clear and satisfying to select gears no matter what the steering angle is. 

Due to its natural characteristics, the shifter will have a more robust and speedier snap back into positions and they make a clean "click" noise every time you shift, making your drive more joyful.

Adjustment:
The Magnetic Paddle Shifter for Porsche allows the user to adjust the angle and distance between the paddle shifter, steering wheels, and steering column. Assembly instructions are on the back of the box. 

• Each Paddle Shifter Kit Consists Of:
• Complete Magnetic Paddle Shifter Units x 2
• GT3 RS Style, CNC Machined Hard Anodized Billet Aluminum Paddles x 2
• New Hardware For Steering Wheel Application
• Allen Keys x 2

Magnetic PDK GT3 RS style paddle shifter set for Sport Design Steering Wheel. 

Fits:
Porsche 992 
Porsche 992 GT3
Porsche 992 turbo
Porsche 971.2 Panamera
Porsche 95B.3 Macan 2021 Onwards

GT3 RS Style Aluminum Paddles - These will not fit OEM Paddle Shifter units

The Magnetic Paddle Shifter System is manufactured from CNC machined 6061-T Grade Hard Anodized Billet Aluminum cage, Neodymium Magnet, and high-strength integrated 4mm-thick Carbon Fiber plates. 

These magnetic paddle shifters will bring you a significantly aggressive driving experience with our engineered design. This system has been designed explicitly with the Porsche Sport Design Steering Wheel, providing outstanding fitment and true plug & play installations. The shifters are track oriented and are built to make it clear and satisfying to select gears no matter what the steering angle is. 

Due to its natural characteristics, the shifter will have a more robust and speedier snap back into positions and they make a clean "click" noise every time you shift, making your drive more joyful.

Adjustment:
The Magnetic Paddle Shifter for Porsche allows the user to adjust the angle and distance between the paddle shifter, steering wheels, and steering column. Assembly instructions are on the back of the box. 

• Each Paddle Shifter Kit Consists Of:
• Complete Magnetic Paddle Shifter Units x 2
• GT3 RS Style, CNC Machined Hard Anodized Billet Aluminum Paddles x 2
• New Hardware For Steering Wheel Application
• Allen Keys x 2

Magnetic PDK GT3 RS style paddle shifter set for Sport Design Steering Wheel. 

Fits:
Porsche 718 Boxster / Cayman
Porsche 718 GT4 / Spyder
Porsche 991
Porsche 958.2 Cayenne
Porsche 95B.1 Macan

GT3 RS Style Aluminum Paddles - These will not fit OEM Paddle Shifter units

The Magnetic Paddle Shifter System is manufactured from CNC machined 6061-T Grade Hard Anodized Billet Aluminum cage, Neodymium Magnet, and high-strength integrated 4mm-thick Carbon Fiber plates. 
These magnetic paddle shifters will bring you a significantly aggressive driving experience with our engineered design. This system has been designed explicitly with the Porsche Sport Design Steering Wheel, providing outstanding fitment and true plug & play installations. The shifters are track oriented and are built to make it clear and satisfying to select gears no matter what the steering angle is. 

Due to its natural characteristics, the shifter will have a more robust and speedier snap back into positions and they make a clean "click" noise every time you shift, making your drive more joyful.

Adjustment:
The Magnetic Paddle Shifter for Porsche allows the user to adjust the angle and distance between the paddle shifter, steering wheels, and steering column. Assembly instructions are on the back of the box. 

Each Paddle Shifter Kit Consists Of:

• Complete Magnetic Paddle Shifter Units x 2
• GT3 RS Style, CNC Machined Hard Anodized Billet Aluminum Paddles x 2
  
• New Hardware For Steering Wheel Application
• Allen Keys x 2