KW

KW height adjustable spring kit.  (for use with original factory shock absorbers)



Fits:
Porsche 95B Macan Mk1 - 2014 to 2018
Porsche 95B Macan Mk2 - 2019 to 2022
For cars with PASM

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: - 1325 R: - 1360
Lowering Front(mm) - 40 - 65
Lowering Rear(mm) - 35 - 60

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25371056

The product you are viewing cross references to these numbers

KW height adjustable spring kit.  (for use with original factory shock absorbers)



Fits:
Porsche 95B Macan Mk1 - 2014 to 2018
Porsche 95B Macan Mk2 - 2019 to 2022

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: - 785 R: - 955
Lowering Front(mm) - 20 -40
Lowering Rear(mm) - ca. 25

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25310090

The product you are viewing cross references to these numbers

KW height adjustable spring kit.  (for use with original factory shock absorbers)



Fits:
Porsche 981 Boxster Spyder - 2016

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: - 785 R: - 955
Lowering Front(mm) - 5 -25
Lowering Rear(mm) - ca. 15

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25371057

The product you are viewing cross references to these numbers

KW height adjustable spring kit.  (for use with original factory shock absorbers)



Fits:
Porsche 981 Boxster / Boxster S - 2012 to 2016
Porsche 981 Cayman / Cayman S - 2013 to 2016
Porsche 718 Boxster / Boxster S - 2017 Onwards
Porsche 718 Boxster GTS 2.5ltr - 2017 Onwards
Porsche 718 Cayman / Cayman S - 2017 Onwards
Porsche 718 Cayman GTS - 2.5ltr - 2017 Onwards

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: - 785 R: - 955
Lowering Front(mm) - 20 -40
Lowering Rear(mm) - ca. 25

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25371048

The product you are viewing cross references to these numbers

KW height adjustable spring kit.  (for use with original factory shock absorbers)



Fits:
Porsche 992 turbo - 2019 Onwards
Porsche 992 turbo S - 2019 Onwards
For Coupe and Cabriolet 

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: - 845 R: - 1340
Lowering Front(mm) - 5 -20
Lowering Rear(mm) - 10-30

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25371090

The product you are viewing cross references to these numbers

KW height adjustable spring kit.  (for use with original factory shock absorbers)



Fits:
Porsche 992 Carrera / Carrera - 2019 Onwards
Porsche 992 Carrera 4 / Carrera 4S - 2019 Onwards
Porsche 992 Targa / Targa 4S - 2019 Onwards
For Coupe / Cabriolet / Targa

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: - 875 R: - 1310
Lowering Front(mm) - 20-35
Lowering Rear(mm) - 15-35

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25371084

The product you are viewing cross references to these numbers

KW height adjustable spring kit.  (for use with original factory shock absorbers)
For cars WITH and WITHOUT PDDC



Fits:
Porsche 99.2 turbo - 2016 to 2018
Porsche 991.1 turbo S  - 2016 to 2018
For Coupe / Cabriolet WITH front axle lift system (M474)

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: -820 R: -1270
Lowering Front(mm) - 10-30
Lowering Rear(mm) - 0-25

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25371075

The product you are viewing cross references to these numbers

KW height adjustable spring kit.  (for use with original factory shock absorbers)
For cars WITH and WITHOUT PDDC



Fits:
Porsche 99.2 turbo - 2016 to 2018
Porsche 991.1 turbo S  - 2016 to 2018
For Coupe / Cabriolet WITHOUT front axle lift system (M474)

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: -820 R: -1270
Lowering Front(mm) - 10-30
Lowering Rear(mm) - 0-25

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25371050

The product you are viewing cross references to these numbers

KW height adjustable spring kit.  (for use with original factory shock absorbers)



Fits:
Porsche 99.1 turbo without PDDC - 2013 to 2015
Porsche 991.1 turbo S without PDDC - 2013 to 2015
For Coupe and Cabriolet

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: -820 R: -1270
Lowering Front(mm) - 10-30
Lowering Rear(mm) - 0-25

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25371050

The product you are viewing cross references to these numbers

KW height adjustable spring kit (for use with original factory shock absorbers)
For cars WITH and WITHOUT PDDC



Fits:
Porsche 991.2 Carrera - 2016 to 2018
Porsche 991.2 Carrera 4 - 2016 to 2018
Porsche 991.2 Carrera S - 2016 to 2018
Porsche 991.2 Carrera 4S - 2016 to 2018
Porsche 991.2 Targa -2016 to 2018
Porsche 991.2 Targa 4S - 2016 to 2018
For Coupe / Cabriolet with front axle lift system (M474)

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: -835 R: -1280
Lowering Front(mm) - 10-25
Lowering Rear(mm) - 10-30

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25371063

The product you are viewing cross references to these numbers

KW height adjustable spring kit (for use with original factory shock absorbers)
For cars WITH and WITHOUT PDDC



Fits:
Porsche 991.2 Carrera - 2016 to 2018
Porsche 991.2 Carrera 4 - 2016 to 2018
Porsche 991.2 Carrera S - 2016 to 2018
Porsche 991.2 Carrera 4S - 2016 to 2018
Porsche 991.2 Targa -2016 to 2018
Porsche 991.2 Targa 4S - 2016 to 2018
For Coupe and Cabriolet

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: -835 R: -1280
Lowering Front(mm) - 15-35
Lowering Rear(mm) - 15-35

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25371043

The product you are viewing cross references to these numbers

KW height adjustable spring kit (for use with original factory shock absorbers)



Fits:
Porsche 99.1 Carrera with PDDC - 2011 to 2015
Porsche 99.1 Carrera 4 with PDDC - 2011 to 2015
Porsche 99.1 Carrera S with PDDC - 2011 to 2015
Porsche 99.1 Carrera 4S with PDDC - 2011 to 2015
For Coupe and Cabriolet

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: -835 R: -1280
Lowering Front(mm) - 15-35
Lowering Rear(mm) - 15-35

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25371045

The product you are viewing cross references to these numbers

KW height adjustable spring kit (for use with original factory shock absorbers)



Fits:
Porsche 99.1 Carrera without PDDC - 2011 to 2015
Porsche 99.1 Carrera 4 without PDDC - 2011 to 2015
Porsche 99.1 Carrera S without PDDC - 2011 to 2015
Porsche 99.1 Carrera 4S without PDDC - 2011 to 2015
For Coupe and Cabriolet

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: -835 R: -1280
Lowering Front(mm) - 15-35
Lowering Rear(mm) - 15-35

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25371043

The product you are viewing cross references to these numbers

KW height adjustable spring kit.  (for use with original factory shock absorbers)



Fits:
Porsche 99.1 turbo with PDDC - 2013 to 2015
Porsche 991.1 turbo S with PDDC - 2013 to 2015
For Coupe and Cabriolet

KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.

When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.

KW Height Adjustable Spring Kit
Max Weight - F: -820 R: -1270
Lowering Front(mm) - 10-30
Lowering Rear(mm) - 0-25

Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)

Product Features:

• Improved steering behaviour and response
• Compatible with OEM dampers
• Adjust ride height even when springs are installed
• Manufactured in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

25371051

The product you are viewing cross references to these numbers

KW Coilover kit V3 with HLS 4 Hydraulik Liftsystem.



Fits:
Porsche 997 C2 / C2S Coupé / Cabrio 07/2004 - 2012

Lowering FRONT / REAR: 20-45mm / 20-45mm
Adjustment FRONT / REAR: Thread / Thread
Mounting position hydraulics: FRONT + REAR
Damping adjustment: Rebound and Compression Damping
Material coilover: Stainless steel
Content of delivery: Set (FRONT + REAR) with HLS 4

KW Hydraulic Lift-System

Make life easy when negotiating obstacles for sporty cars with low ground clearance.

More ground clearance by the push of a button

With the HLS lift system you can lift your sports car or lowered vehicle to safely negotiate obstacles such as speedbumps, railroad crossings, road works, garages and underground car parks. Depending on the version of the HLS lift system your vehicle can be hydraulically lifted either at the front axle or on both axles by up to 45 mm.

KW Hydraulic Lift System

This prevents damage to your aerodynamic components, underbody protection or even oil sump. The lift system is available either as a vehicle-specific solution with or without a KW coilover kit, depending on the type of car and the model. If you cannot find your vehicle in our KW HLS product range, our engineers have also developed a universal lift system.

A great solution made by KW

For a wide range of super cars and general everyday cars our HLS is available as an application-specific solution. Included in the delivery are such parts as the hydraulic lines or hydraulic pump adapted to your vehicle, all components will fit perfectly to your sports car. No matter if you want to combine the HLS with your series suspension kit or our KW coilovers which are one of the worlds top aftermarket products, the choice is yours. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many other well-known companies of the international automotive industry place their trust in KW coilover kits.

The lift kit "HLS 2" is only installed on the front axle. "HLS 4" allows you to lift the entire vehicle. A hydraulic cylinder is installed between spring plate and springs of each KW strut. The great advantage of the hydraulic system is that driving dynamics are not affected. The delivery content for all HLS lift kit versions include a control unit, which is connected to the vehicles on-board electronics. The vehicle will be automatically lowered at a certain speed to the original level of the KW coilover kit or your series suspension.

- available as complete solution including KW coilovers
- or as a conversion kit
- can be activated from inside the vehicle via an LED
- control button or by an optional remote control
- can be activated while driving (up to 80 km/h)
- fast lifting within 4-5 seconds (HLS 2)
- absolutely corrosion restistant (coated cylinder components made of aluminum)

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35271415

The product you are viewing cross references to these numbers

KW Coilover kit V3 with HLS 2 Hydraulik Liftsystem.



Fits:
Porsche 997 C2 / C2S Coupé / Cabrio 07/2004 - 2012

Lowering FRONT / REAR: 20-45mm / 20-45mm
Adjustment  FRONT / REAR: Thread / Thread
Mounting position hydraulics: FRONT
Damping adjustment:  Rebound and Compression
Damping Material coilover: Stainless steel
Content of delivery: Set (Front + Rear) with HLS 2

KW Hydraulic Lift-System

Make life easy when negotiating obstacles for sporty cars with low ground clearance.

More ground clearance by the push of a button

With the HLS lift system you can lift your sports car or lowered vehicle to safely negotiate obstacles such as speedbumps, railroad crossings, road works, garages and underground car parks. Depending on the version of the HLS lift system your vehicle can be hydraulically lifted either at the front axle or on both axles by up to 45 mm.

KW Hydraulic Lift System

This prevents damage to your aerodynamic components, underbody protection or even oil sump. The lift system is available either as a vehicle-specific solution with or without a KW coilover kit, depending on the type of car and the model. If you cannot find your vehicle in our KW HLS product range, our engineers have also developed a universal lift system.

A great solution made by KW

For a wide range of super cars and general everyday cars our HLS is available as an application-specific solution. Included in the delivery are such parts as the hydraulic lines or hydraulic pump adapted to your vehicle, all components will fit perfectly to your sports car. No matter if you want to combine the HLS with your series suspension kit or our KW coilovers which are one of the worlds top aftermarket products, the choice is yours. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many other well-known companies of the international automotive industry place their trust in KW coilover kits.

The lift kit "HLS 2" is only installed on the front axle. "HLS 4" allows you to lift the entire vehicle. A hydraulic cylinder is installed between spring plate and springs of each KW strut. The great advantage of the hydraulic system is that driving dynamics are not affected. The delivery content for all HLS lift kit versions include a control unit, which is connected to the vehicles on-board electronics. The vehicle will be automatically lowered at a certain speed to the original level of the KW coilover kit or your series suspension.

- available as complete solution including KW coilovers
- or as a conversion kit
- can be activated from inside the vehicle via an LED
- control button or by an optional remote control
- can be activated while driving (up to 80 km/h)
- fast lifting within 4-5 seconds (HLS 2)
- absolutely corrosion restistant (coated cylinder components made of aluminum)

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35271215

The product you are viewing cross references to these numbers

KW Variant 1 Height Adjustable kit. 



Fits:
Porsche 997 C2 / C2S Coupé / Cabrio 07/2004 - 2012
Cars WITHOUT PASM

KW Variant 1 "inox-line"

Sporty handling combined with outstanding looks. With factory pre-configured damping.
The KW coilover kit Variant 1 "inox-line" is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.

Continuous lowering
With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans
KW coilover Variant 1 "inox-line" satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 "inox-line", rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In Our Experience
We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers "Made in Germany". Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers.

- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology "inox-line"
- Individually height adjustable
- tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling

Setup - Factory pre-configured damping setup
The KW coilover Variant 1 "inox-line" has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line".


This product is a special order item allow 24 working days - 8 weeks for delivery.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

10271015

The product you are viewing cross references to these numbers

KW Dynamic Damping Control (DDC) with ECU Coilover Kit



Fits:
Porsche 958 Cayenne V6 3.6ltr Petrol without PASM
Porsche 958 Cayenne V6 3.0ltr Diesel without PASM
Porsche 958 Cayenne S V8 4.8ltr Petrol without PASM
Porsche 958 Cayenne S V8 4.2ltr Diesel without PASM

Individuality by the push of a button

Lowers car by 35mm to 70mm

The KW DDC coilovers are part of the KW iSuspension program - the intelligent suspension solution. They combine the advantages of an adaptive damping system with a vehicle-specific aftermarket suspension solution.

The adaptive KW DDC ECU coilovers allow adjustment within the tested lowering range. The dirt-resistant trapezoid thread and the composite collar allow years of accessible adjustability and ease of use. Lowering can be done via the composite spring collar on the shock body or on the height adjustable rear perch in the rear of the vehicle. No matter where in the world, sporty drivers, car manufacturers and refiners rely on our KW technology "Made in Germany".

Each KW coilover kit is produced at our headquarter located in Fichtenberg, Germany. During the production process each kit is subjected to extensive stress tests and must meet the high quality standards set by KW management and surpass OEM quality. Over 4600 applications come supported with a multi-year warranty. A 5 year warranty is provided when the kit is installed at one of KW's specialist dealers. Currently KW DDC ECU coilovers with App-control are available for Audi, BMW, Mercedes-Benz, Porsche, Volkswagen and Range Rover Evoque.

• Retrofit electronic damper adjustment, combined with the advantages of a KW coilover kit
• Optional App-control
• Three damping setups: Comfort / Sport / Sport+
• Operated by retrofit button or optional App
• Create personalized setups with the KW DDC App

KW DDC button - 1 x button, 3 x more experience

The contents of delivery of the KW DDC ECU coilover kit includes: a "KW DDC multi-selection button". This button allows the user to select between the different KW DDC driving modes "Comfort", "Sport" and "Sport+" directly from the cockpit. Here the KW DDC button changes the colour matching the KW DDC App.

W-LAN Module & App Control
Optional App control for real time suspension adjustment via iPhone, iPod touch or iPad

Experience the latest technology "Made in Germany": the KW DDC (Dynamic Damping Control) coilovers with ECU (Electronic Control Unit). The coilovers with its electronically controlled dampers enable an intelligent suspension setup via App-control. Currently available for numerous vehicles without factory adaptive suspension.

This allows you to upgrade your car with an adaptive damper control and to have the option to adjust via the KW DDC App to suit your driving style. You do not need any tools or to physically adjust the dampers.

The free KW DDC KW App in combination with our optional W-LAN module will allow you to customize your own damper setup instantaneously.

For cars which have electronic dampers (PASM) make sure it is shut down. Specific electronic damper shut-downs are available from KW. Please check our accessories list

Installation instruction
Installation instruction

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

39071003

The product you are viewing cross references to these numbers

KW Dynamic Damping Control (DDC) with ECU Coilover Kit



Fits:
Porsche 991.1 Carrera 2 / Carrera 2S with PDDC
Porsche 991.1 Carrera 4 / Carrera 4S with PDDC
For Coupe, Cabriolet and Targa

Individuality by the push of a button

Lowers car by 25mm to 50mm

The KW DDC coilovers are part of the KW iSuspension program - the intelligent suspension solution. They combine the advantages of an adaptive damping system with a vehicle-specific aftermarket suspension solution.

The adaptive KW DDC ECU coilovers allow adjustment within the tested lowering range. The dirt-resistant trapezoid thread and the composite collar allow years of accessible adjustability and ease of use. Lowering can be done via the composite spring collar on the shock body or on the height adjustable rear perch in the rear of the vehicle. No matter where in the world, sporty drivers, car manufacturers and refiners rely on our KW technology "Made in Germany".

Each KW coilover kit is produced at our headquarter located in Fichtenberg, Germany. During the production process each kit is subjected to extensive stress tests and must meet the high quality standards set by KW management and surpass OEM quality. Over 4600 applications come supported with a multi-year warranty. A 5 year warranty is provided when the kit is installed at one of KW's specialist dealers. Currently KW DDC ECU coilovers with App-control are available for Audi, BMW, Mercedes-Benz, Porsche, Volkswagen and Range Rover Evoque.

• Retrofit electronic damper adjustment, combined with the advantages of a KW coilover kit
• Optional App-control
• Three damping setups: Comfort / Sport / Sport+
• Operated by retrofit button or optional App
• Create personalized setups with the KW DDC App

KW DDC button - 1 x button, 3 x more experience

The contents of delivery of the KW DDC ECU coilover kit includes: a "KW DDC multi-selection button". This button allows the user to select between the different KW DDC driving modes "Comfort", "Sport" and "Sport+" directly from the cockpit. Here the KW DDC button changes the colour matching the KW DDC App.

W-LAN Module & App Control
Optional App control for real time suspension adjustment via iPhone, iPod touch or iPad

Experience the latest technology "Made in Germany": the KW DDC (Dynamic Damping Control) coilovers with ECU (Electronic Control Unit). The coilovers with its electronically controlled dampers enable an intelligent suspension setup via App-control. Currently available for numerous vehicles without factory adaptive suspension.

This allows you to upgrade your car with an adaptive damper control and to have the option to adjust via the KW DDC App to suit your driving style. You do not need any tools or to physically adjust the dampers.

The free KW DDC KW App in combination with our optional W-LAN module will allow you to customize your own damper setup instantaneously.

For cars which have electronic dampers (PASM) make sure it is shut down. Specific electronic damper shut-downs are available from KW. Please check our accessories list.

Installation instruction
Installation instruction

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

39071004

The product you are viewing cross references to these numbers

KW Dynamic Damping Control (DDC) with ECU Coilover Kit



Fits:
Porsche 991.1 Carrera 2 / Carrera 2S without PDDC
Porsche 991.1 Carrera 4 / Carrera 4S with and without PDDC
Porsche 991.2 Carrera 2 / Carrera 2S with and without PDDC
Porsche 991.2 Carrera 4 / Carrera 4S with and without PDDC
For Coupe, Cabriolet and Targa

On 991.2 NOT for cars with M474 Front-axle lift function

Individuality by the push of a button

Lowers car by 25mm to 50mm

The KW DDC coilovers are part of the KW iSuspension program - the intelligent suspension solution. They combine the advantages of an adaptive damping system with a vehicle-specific aftermarket suspension solution.

The adaptive KW DDC ECU coilovers allow adjustment within the tested lowering range. The dirt-resistant trapezoid thread and the composite collar allow years of accessible adjustability and ease of use. Lowering can be done via the composite spring collar on the shock body or on the height adjustable rear perch in the rear of the vehicle. No matter where in the world, sporty drivers, car manufacturers and refiners rely on our KW technology "Made in Germany".

Each KW coilover kit is produced at our headquarter located in Fichtenberg, Germany. During the production process each kit is subjected to extensive stress tests and must meet the high quality standards set by KW management and surpass OEM quality. Over 4600 applications come supported with a multi-year warranty. A 5 year warranty is provided when the kit is installed at one of KW's specialist dealers. Currently KW DDC ECU coilovers with App-control are available for Audi, BMW, Mercedes-Benz, Porsche, Volkswagen and Range Rover Evoque.

• Retrofit electronic damper adjustment, combined with the advantages of a KW coilover kit
• Optional App-control
• Three damping setups: Comfort / Sport / Sport+
• Operated by retrofit button or optional App
• Create personalized setups with the KW DDC App

KW DDC button - 1 x button, 3 x more experience

The contents of delivery of the KW DDC ECU coilover kit includes: a "KW DDC multi-selection button". This button allows the user to select between the different KW DDC driving modes "Comfort", "Sport" and "Sport+" directly from the cockpit. Here the KW DDC button changes the colour matching the KW DDC App.

W-LAN Module & App Control
Optional App control for real time suspension adjustment via iPhone, iPod touch or iPad

Experience the latest technology "Made in Germany": the KW DDC (Dynamic Damping Control) coilovers with ECU (Electronic Control Unit). The coilovers with its electronically controlled dampers enable an intelligent suspension setup via App-control. Currently available for numerous vehicles without factory adaptive suspension.

This allows you to upgrade your car with an adaptive damper control and to have the option to adjust via the KW DDC App to suit your driving style. You do not need any tools or to physically adjust the dampers.

The free KW DDC KW App in combination with our optional W-LAN module will allow you to customize your own damper setup instantaneously.

For cars which have electronic dampers (PASM) make sure it is shut down. Specific electronic damper shut-downs are available from KW. Please check our accessories list

Installation instruction
Installation instruction

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

39071002

The product you are viewing cross references to these numbers

KW Dynamic Damping Control (DDC) with ECU Coilover Kit



Fits:
Porsche 997 Carrera 2 / Carrera 2S with and without PASM
Coupe Only

Individuality by the push of a button

Lowers car by 20mm to 45mm

The KW DDC coilovers are part of the KW iSuspension program - the intelligent suspension solution. They combine the advantages of an adaptive damping system with a vehicle-specific aftermarket suspension solution.

The adaptive KW DDC ECU coilovers allow adjustment within the tested lowering range. The dirt-resistant trapezoid thread and the composite collar allow years of accessible adjustability and ease of use. Lowering can be done via the composite spring collar on the shock body or on the height adjustable rear perch in the rear of the vehicle. No matter where in the world, sporty drivers, car manufacturers and refiners rely on our KW technology "Made in Germany".

Each KW coilover kit is produced at our headquarter located in Fichtenberg, Germany. During the production process each kit is subjected to extensive stress tests and must meet the high quality standards set by KW management and surpass OEM quality. Over 4600 applications come supported with a multi-year warranty. A 5 year warranty is provided when the kit is installed at one of KW's specialist dealers. Currently KW DDC ECU coilovers with App-control are available for Audi, BMW, Mercedes-Benz, Porsche, Volkswagen and Range Rover Evoque.

• Retrofit electronic damper adjustment, combined with the advantages of a KW coilover kit
• Optional App-control
• Three damping setups: Comfort / Sport / Sport+
• Operated by retrofit button or optional App
• Create personalized setups with the KW DDC App

KW DDC button - 1 x button, 3 x more experience

The contents of delivery of the KW DDC ECU coilover kit includes: a "KW DDC multi-selection button". This button allows the user to select between the different KW DDC driving modes "Comfort", "Sport" and "Sport+" directly from the cockpit. Here the KW DDC button changes the colour matching the KW DDC App.

W-LAN Module & App Control
Optional App control for real time suspension adjustment via iPhone, iPod touch or iPad

Experience the latest technology "Made in Germany": the KW DDC (Dynamic Damping Control) coilovers with ECU (Electronic Control Unit). The coilovers with its electronically controlled dampers enable an intelligent suspension setup via App-control. Currently available for numerous vehicles without factory adaptive suspension.

This allows you to upgrade your car with an adaptive damper control and to have the option to adjust via the KW DDC App to suit your driving style. You do not need any tools or to physically adjust the dampers.

The free KW DDC KW App in combination with our optional W-LAN module will allow you to customize your own damper setup instantaneously.

For cars which have electronic dampers (PASM) make sure it is shut down. Specific electronic damper shut-downs are available from KW. Please check our accessories list

Installation instruction
Installation instruction

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

39071001

The product you are viewing cross references to these numbers

PASM Cancel kit.



987 Cayman

Also usable for suspensions made by other manufacturers and OE aftermarket suspensions

Cancellers avoid ECU failure when suspension is upgraded to KW suspensions

Only factory damper signal is cancelled which results in prevention of error signal

Electronic control unit remains fully functional

For Installation Instructions please CLICK HERE

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

68510148

The product you are viewing cross references to these numbers

PASM Cancel kit.



Porsche 992 GT3

Also usable for suspensions made by other manufacturers and OE aftermarket suspensions

Cancelers avoid ECU failure when suspension is upgraded to KW suspensions

Only factory damper signal is cancelled which results in prevention of error signal

Electronic control unit remains fully functional

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

68511202

The product you are viewing cross references to these numbers

PASM Cancel kit.



Porsche 991.1 GT3 / GT3 RS
Porsche 991.2 GT3 / GT3 RS
Porsche 981 Cayman GT4

Also usable for suspensions made by other manufacturers and OE aftermarket suspensions

Cancellers avoid ECU failure when suspension is upgraded to KW suspensions

Only factory damper signal is cancelled which results in prevention of error signal

Electronic control unit remains fully functional

For Installation Instructions please CLICK HERE

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

68510411

The product you are viewing cross references to these numbers

PASM Cancel kit.



Porsche 955 Cayenne
Porsche 957 Cayenne
Porsche 95B Macan

Also usable for suspensions made by other manufacturers and OE aftermarket suspensions

Cancellers avoid ECU failure when suspension is upgraded to KW suspensions

Only factory damper signal is cancelled which results in prevention of error signal

Electronic control unit remains fully functional

For Installation Instructions please CLICK HERE

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

68510365

The product you are viewing cross references to these numbers

PASM Cancel kit.



718 Cayman GT4

Also usable for suspensions made by other manufacturers and OE aftermarket suspensions

Cancellers avoid ECU failure when suspension is upgraded to KW suspensions

Only factory damper signal is cancelled which results in prevention of error signal

Electronic control unit remains fully functional

For Installation Instructions please CLICK HERE

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

68511186

The product you are viewing cross references to these numbers

KW Variant 1 Height Adjustable kit



Fits:
Porsche 997 C2 / C2S Cabriolet 07/2004>>
Cars WITH PASM Porsche Active Suspension Management System

KW Variant 1 "inox-line"

Sporty handling combined with outstanding looks. With factory pre-configured damping.
The KW coilover kit Variant 1 "inox-line" is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.

Continuous lowering
With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans
KW coilover Variant 1 "inox-line" satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 "inox-line", rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In Our Experience
We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers "Made in Germany". Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers.

- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology "inox-line"
- Individually height adjustable
- tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling

Setup - Factory pre-configured damping setup
The KW coilover Variant 1 "inox-line" has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line".


This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

10271038

The product you are viewing cross references to these numbers

PASM Cancel kit.

Cabriolet Only

Also usable for suspensions made by other manufacturers and OE aftermarket suspensions

Cancellers avoid ECU failure when suspension is upgraded to KW suspensions

Only factory damper signal is cancelled which results in prevention of error signal

Electronic control unit remains fully functional

For Installation Instructions please CLICK HERE

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

68510165

The product you are viewing cross references to these numbers

HLS conversion kit for cars with OEM Suspension.



Fits
Porsche 991 (911) Turbo, Turbo S; Coupé + Cabrio; only left hand drive with PDCC

KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.

Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered

• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

Estimated Labour time to fit this kit is 8-10hrs. Depends on spec of the car and other conditions

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271651

The product you are viewing cross references to these numbers

HLS conversion kit for cars with OEM Suspension.



Fits
Porsche 991 (911) Carrera 2/2S/GTS, Carrera 4/4S/GTS, Targa 4/4S; coupé + convertible; only right hand drive without PDCC 12/2015>>

Porsche 991 (911) Carrera 2/2S, Carrera 4/4S, Targa 4/4S; facelift; coupé + convertible; only right hand drive with + without PDCC
12/2015>>

KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.

Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered

• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

Estimated Labour time to fit this kit is 8-10hrs. Depends on spec of the car and other conditions

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271652

The product you are viewing cross references to these numbers

KW Variant 1 Height Adjustable kit



Fits:
Porsche 997 C2 / C2S Coupé 07/2004 - 2012
Cars WITH PASM Porsche Active Suspension Management System

KW Variant 1 "inox-line"

Sporty handling combined with outstanding looks. With factory pre-configured damping.
The KW coilover kit Variant 1 "inox-line" is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.

Continuous lowering
With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans
KW coilover Variant 1 "inox-line" satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 "inox-line", rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In Our Experience
We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers "Made in Germany". Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers.

- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology "inox-line"
- Individually height adjustable
- tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling

Setup - Factory pre-configured damping setup
The KW coilover Variant 1 "inox-line" has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line".


This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

10271031

The product you are viewing cross references to these numbers

KW Coilover Kit V2 Porsche Model 356 adjustable Dampers



Fits:
Porsche 356 / 356A / 356B / 356C 09/1947-03/1968

KW Variant 2: Sporty and personalized with adjustable rebound dampening.

This system is designed for the driver who requires not only determining the individual lowering of their vehicle, but having the ability to adjust the damper settings to fine tune the system to their needs.
The adjustable rebound damper allows adjustment of the pitch and roll of the vehicle adapting it to one's own driving preferences.


This product is a special order item allow 24 working days -8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

15271072

The product you are viewing cross references to these numbers

HLS conversion kit for cars with KW coilover kit already fitted.



Fits
Raises: FA: 30-50mm / RA: 25-50mm

Porsche 991 (911) Carrera 2/2S/GTS, Carrera 4/4S/GTS, Targa 4/4S; coupé + convertible
12/2011-11/2015
ONLY right hand drive without PDCC

KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.

Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered

• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35271229

The product you are viewing cross references to these numbers

KW Variant 3 Adjustable kit.



Fits:
Porsche 911 F-Series 1965-73

As part of our "Classic Range" we are now able to provide a complete set of compression and rebound adjustable shock absorbers for the Porsche 911 F-Series.

This kit will accept S-type calipers and vented discs. If your car has M-type calipers (2 piece) and solid discs you have to buy the calipers and discs separately.

KW Notes:
-Dampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.
-Damper set incl. knuckle in galvanized steel

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35271076

The product you are viewing cross references to these numbers

KW Coilover ClubSport Suspension kit.



Fits:
Porsche 911 G-Series 1974-89 Incl. Top Mounts

These adjustment features allow the user to dial in vehicle weight, wheel/tire combinations, various road surfaces and environmental conditions.

The suspension kit has a 3.5" space between the brake calliper mounting points which are for the S type callipers which evidently most G models have.
However some earlier cars have the M calliper will NOT fit this suspension kit


- independently adjustable rebound and compression damping technology
- stainless steel technology "inox-line"
- continuous lowering
- tested adjustment range
- high-quality components for a long-term durability
- adjustable rebound damping with 16 precise clicks
- adjustable compression damping with 12 precise clicks
- unique, independent damping force adjustment
- optional spherical bearing aluminum top mounts

The KW Clubsport coilovers utilize the uncompromising transfer of technology from the world of motorsports to track day/street driving.
The KW Clubsport coilovers combine KW's high-end racing technology with maintenance-free KW OEM components and part certificate.

This will provide you the ideal product to take full potential of your sports car during track days, sports car driving clinics, enthusiast drives on Grand Prix circuits and on tracks such as the Nürburgring Nordschleife.

Designed on the toughest race track in the world: The Nürburgring Nordschleife
The KW Clubsport coilovers provide the ability to adjust for different track surfaces, sharp turns and abrupt elevation changes. The KW Clubsport is in its home environment on the famous twists and turns of the 20.8 km long Nürburgring Nordschleife circuit.

As a supporting suspension manufacturer to numerous different racing series. KW had claimed 6 ADAC Zurich 24-hour victories within 10 years at the famous Nürburgring circuit and the ADAC GT Masters 2011 Championship. More then 70 race teams are equipped with KW coilover systems in the VLN Endurance Championship series. These race teams rely on KW's racing expertise and experience for their vehicle setup. This information is mirrored in the development of the KW Clubsport coilover systems.

The KW Clubsport 2-way and KW Clubsport 3-way (with separate reservoir) provides the user numerous adjustment settings. This allows to user to dial the suspension setup to his/hers driving style and to adjust or match the tire/wheel setup of the vehicle.

Rebound and compression dampening is independently adjustable by hand via the integrated click adjusters. Adjustable top mounts are optional on certain applications.

KW Clubsport coilovers 2-way Racing Technology
The rebound adjuster knob provides 16 precise clicks to personally dial in your desired vehicle setup. Thus allowing you the possibility to influence wheel/tire loads or take into concern chassis characteristics. Independent from rebound adjustment is the compression dampening, 12 precise adjustment clicks are provided to adjust the low-speed dampening. Most notably used to dial in wheel/tire setup.

Setup: Application and damper settings
The KW Clubsport 2-way coilovers provide the ideal adjustment range for race tracks such as the Nürburgring Nordschleife and other racing circuits.

Note:
Actual product may differ from what is shown.
- Height adjustable on the front and rear axles (threaded strut housings)
- Dampers are adjusted by easily operating adjustment wheels. Rebound is only adjustable if the top of the piston rod is accessible. This will depend on the vehicle construction.
- Clubsport coilover with top mount: only with front axle top mount available
- Front axle coilovers incl. Knuckle in galvanized steel

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35271864

The product you are viewing cross references to these numbers

KW Variant 3 Adjustable 19mm Lowered kits. Porsche 911 G-Series 1974-89



The suspension kit has a 3.5" space between the brake calliper mounting points which are for the S type callipers which evidently most G models have.
However some earlier cars have the M calliper which will NOT fit this suspension kit

KW Variant 3 damper kit for the Classic 911 Porsche is now also available with a 19mm lowering. The difference between the two products is the steering knuckle which is mounted 19 mm higher on the new damper kit. By changing the position of the steering knuckle, you not only achieve a fixed lowering of 19 mm, but also the measurement of the former Group 4 Homologation from Porsche.
Furthermore, with this technical modification it is still possible to drive on 15-inch wheels.

Features:
19mm raised spindles
Version: Variant 3
Damping adjustment: Rebound and compression damping
Adjustment FA/RA: Thread/Thread
Material: Stainless steel
Approval: Registration free
Content of delivery: Set FA damper + RA damper

The classic Porsche 911 models have been characterized for decades by a timeless styling coupled with unadulterated sportiness. Everywhere in the world, the "911" is known as a sports car icon. From now on, in compression and rebound damping independently adjustable KW Variant 3 shock absorbers are available as a suspension complete set in galvanized steel housings for all Porsche 911 (from model year 1974) built from 1973 - 1989. For the first time, it is possible that a suspension kit for the Porsche 911 (G-model) with road approval can be adjusted in driving behavior individually to the own personal driving demand. With the integrated compression and rebound adjustment click adjusters, it is easy to individually adjust our recommended damper basic setup. For example, with its 16 click setting, the rebound allows to directly take influence on the handling characteristics as well as the driving comfort. With the low speed compression valve, which can be adjusted in twelve clicks, the driving behavior of the Porsche classic can be further increased if desired. For example, a higher compression level on the front axle allows an even more direct steering, and on the rear axle, higher compression damping forces counteract the oversteering. Due to the degressive valve assembly of the preconfigured high speed compression valve, the damping is positively influenced in the case of a sudden driving over street bumps. The wheels can immerse suddenly and this for example prevents the jumping over curbs. The Porsche 911 equipped with the adjustable KW shock absorbers receives a much more direct handling and gets significantly more grip on the rear axle without an increased oversteer. Even the remaining comfort is increased. The great advantage besides a quantum leap in terms of driving dynamics is that the "KW suspension kit" features spindle struts and dampers, so time-consuming strut conversions with replacement cartridges is not necessary. Also, the standard torsion bar springs on the front and rear axle can still be used.

It technically causes:

- when lowering, the roll center remains higher or is higher at the same driving height.
- the lower transverse control arm does not go upwards, seen from the vehicle
- as a result, the front wheel does not go, or go less, into the direction of a positive camber during compression.
- of course this also causes a lowering of 19 mm, at a constant position of the torsion bar.

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35271064

The product you are viewing cross references to these numbers

KW Suspension REAR top mount for 964 C4 >>11/1990 Variant 3

KW Suspension REAR top mount for 964 C4 >>11/1990 Variant 3

PASM Cancel kit.

Not For Following Cars

Porsche Cayman GT4
Porsche 991 GT3
Porsche 991 GT3 RS

Also usable for suspensions made by other manufacturers and OE aftermarket suspensions

Cancellers avoid ECU failure when suspension is upgraded to KW suspensions

Only factory damper signal is cancelled which results in prevention of error signal

Electronic control unit remains fully functional

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

68510316

The product you are viewing cross references to these numbers

KW Coilover kit Clubsport 3-way incl. top mounts - only with front axle top mount available for cars without PASM.



Lowers car by : FT 30-50 mm / RR 25-45 mm

Fits:
Porsche 718 (982) Boxster 2017>>
Porsche 718 (982) Cayman 2017>>
Porsche 981 Boxster Spyder
Porsche 981 Boxster / Boxster S 2012-16
Porsche 981C Cayman / Cayman S 2013-16

Cars WITHOUT PASM Porsche Active Suspension Management System


Nurburgring Nordschleife is the most popular race track for using our KW Clubsport suspension kits. High performance sports cars, modified saloons as well as classical sport compact cars are tuned in weight, engine and wheels for their use on several race tracks. These improvements are made for a better handling on track sport events, race taxi drives, visitor drives and equability tests particularly on the Nurburgring Nordschleife. Due to these modifications of the car some parameters are changing. Therefore, the road setups are no longer ideal for the performance of the car. For this use we offer special clubsport kits which have been adapted to the changed requirements by changing spring and shock setup as well as the installation of racing top mounts.

• Performance setup for the racetrack
• Dampers in compression and rebound forces independently adjustable
• Use of high performance linear race springs
• Additional available with racing top mounts
• TÜV approval possible depending on the specification

This product is a special order item allow 24 working days -8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

39771278

The product you are viewing cross references to these numbers