Anti Roll Sway Bar
Front and Rear QuickChange™ Blade Style Sway bar. Porsche 911 / 912 / 930 / 914
Code: 227002
Front QuickChange™ Blade Style Sway bar
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Front and Rear QuickChange™ Blade Style Sway Bar System
Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.
Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.
The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts
Perfect Geometry
Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.
Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.
Lightweight
Hollow bar reduces weight.
Fast and Easy Adjustment
No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.
For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
227002
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Front and Rear QuickChange™ Blade Style Sway Bar System
Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.
Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.
The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts
Perfect Geometry
Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.
Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.
Lightweight
Hollow bar reduces weight.
Fast and Easy Adjustment
No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.
For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
227002
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
2270020
2270022
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £1,372.00
Rear retro RSR adjustable sway bar. Porsche 911 / 912 / 930 / 914
Code: 1-RSRRSBA
Rear retro RSR adjustable sway bar.
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Retro RSR Adjustable Sway Bar System
Retro appearance combined with modern performance and features make these adjustable sway bars (anti roll bar) a great choice for period-correct builds.
Drop links
Appearance similar to the RSR originals with a grey colour for a discreet and retro appearance. Left and right threaded precision rod ends make easy work of adjusting front drop link length. Adjustable length makes it easy to eliminate any preload on the bar. Teflon lined rod ends never require lubrication.
Lightweight
Hollow bars weigh half as much as similar solid bars delivering equal stiffness..
Bushings
Teflon impregnated bushings are grease and maintenance free and provide smooth operation and long life.
Through-body style front bar
Installs through the body same as the pre-1974 cars and the early turbo cars. Cars not originally equipped with a through-body sway bar should purchase the optional backer plate kit.
Retro-Look Arms
Steel arms are similar to the original RSR type and have drilled adjustment positions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1-RSRRSBA
The product you are viewing cross references to these numbers
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Retro RSR Adjustable Sway Bar System
Retro appearance combined with modern performance and features make these adjustable sway bars (anti roll bar) a great choice for period-correct builds.
Drop links
Appearance similar to the RSR originals with a grey colour for a discreet and retro appearance. Left and right threaded precision rod ends make easy work of adjusting front drop link length. Adjustable length makes it easy to eliminate any preload on the bar. Teflon lined rod ends never require lubrication.
Lightweight
Hollow bars weigh half as much as similar solid bars delivering equal stiffness..
Bushings
Teflon impregnated bushings are grease and maintenance free and provide smooth operation and long life.
Through-body style front bar
Installs through the body same as the pre-1974 cars and the early turbo cars. Cars not originally equipped with a through-body sway bar should purchase the optional backer plate kit.
Retro-Look Arms
Steel arms are similar to the original RSR type and have drilled adjustment positions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1-RSRRSBA
91133370111
477411313M
93033370125
93033370129
93033370128
91133370107
477411313N
93033370123
91133370101
91133370104
90133370103
90133370104
93033370100
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £710.50
Sway bar backdate mounting kit. Porsche 911 / 912 / 930 / 914
Code: 2270025_2270024
Sway bar backdate mounting kit
1 kit required per car
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
When installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.
• Required For Through-Body Sway bar Conversions
• Not required for Elephant Racing Blade Type Sway bars
• Welding required for proper installation
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2270025_2270024
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
When installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.
• Required For Through-Body Sway bar Conversions
• Not required for Elephant Racing Blade Type Sway bars
• Welding required for proper installation
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2270025_2270024
2270025_2270024
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£72.00
Now £70.56
Orderable
Sway bar mounting backer plate kit. Porsche 911 / 912 / 930 / 914
Code: 2270024
Sway bar mounting backer plate kit
1 kit required per car
Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2270024
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2270024
2270024
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£55.00
Now £53.90
In stock
DISPLAYING 1 to 4 (of 4 products)
About Anti Roll Sway Bar
Upgrade Your Porsche Suspension with Anti-Roll Bars: Technical Specifications and Benefits
Technical specifications of Anti-Roll Bars:
- Anti-roll bars, also known as sway bars or stabilizer bars, are suspension components designed to reduce body roll during cornering.
- They are typically made from high-strength steel or lightweight alloys.
- Anti-roll bars consist of a solid or hollow tubular bar that connects the left and right suspension components.
- They come in various sizes and thicknesses, allowing for adjustable stiffness and fine-tuning of the vehicle's handling characteristics.
- Anti-roll bars are available as upgrade options or standard replacements for Porsche models.
Benefits of upgrading or replacing Anti-Roll Bars for your Porsche:
Improved handling: Anti-roll bars reduce body roll, providing enhanced stability and control during cornering, resulting in improved handling and responsiveness.
Enhanced grip: By reducing weight transfer and maintaining better tire contact with the road, anti-roll bars help improve traction and grip, especially in high-speed maneuvers.
Minimized understeer or oversteer: Anti-roll bars allow for fine-tuning of the suspension setup to address specific handling issues, such as excessive understeer (front-end pushing) or oversteer (rear-end sliding).
Increased driver confidence: Upgrading to performance anti-roll bars can provide a more connected and predictable driving experience, inspiring confidence behind the wheel.
Enhanced safety: By reducing body roll and improving stability, anti-roll bars contribute to overall safety by minimizing the risk of rollovers and maintaining better control in emergency situations.
At Design911, we understand the importance of finding the correct parts for your Porsche and providing professional advice to ensure the best results. We offer a wide range of anti-roll bars specifically designed for Porsche models, including OEM replacements and performance upgrades. Our knowledgeable team can assist you in selecting the appropriate anti-roll bar based on your Porsche model, year, and specific requirements. With our expertise and commitment to customer satisfaction, you can trust us to help you enhance your Porsche's suspension performance and handling characteristics. Contact us today for expert assistance and quality products tailored to your needs.
You may also like
Popular Models
