Anti Roll Sway Bar

Powerflex Heritage Collection Anti Roll Bar Bush Rear.

SET OF 4



Rear stabilizer bar bush - 15mm.
Rear drop link bush - 15mm.
Fits - left and right side.

Fits:
Porsche 911 1965-73 Rear
Porsche 914 1970-76 Rear

Note: Please check anti roll bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-15H

The product you are viewing cross references to these numbers

Powerflex Black Series Stabilizer Bar Bush Rear.
Sold as a pack of 4 bushes

Replacement for Porsche parts No. 90133379304.



Rear stabilizer bar bush - 16mm.
Rear drop link bush - 16mm.
Fits - left and right side.

Fits:
Porsche 911 1965-68 L / T / TU Rear 4 required per car
(Stabiliser bar and Drop link)

Porsche 914 1970-76 Rear 2 required per car
(Stabiliser bar)

Diagram Ref No 2.
Click 'Zoom in' for large parts diagram.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-16BLK

The product you are viewing cross references to these numbers

Powerflex Anti Roll Bar Bush Rear.
Replacement for Porsche parts No. 90133379304.

SET OF 4



Rear stabilizer bar bush - 16mm.
Rear drop link bush - 16mm.
Fits - left and right side.

Fits:
Porsche 911 1965-68 L / T / TU Rear 4 required per car
(Stabiliser bar and Drop link)

Porsche 914 1970-76 Rear 2 required per car
(Stabiliser bar)

Diagram Ref No 2.
Click 'Zoom in' for large parts diagram.

NOTE: Please check anti roll bar diameter before ordering.


Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-16

The product you are viewing cross references to these numbers

Powerflex Heritage Anti Roll Bar Bush Rear.
Replacement for Porsche parts No. 90133379304.

SET OF 4



Rear stabilizer bar bush - 16mm.
Rear drop link bush - 16mm.
Fits - left and right side.

Fits:
Porsche 911 1965-68 L / T / TU Rear 4 required per car
(Stabiliser bar and Drop link)

Porsche 914 1970-76 Rear 2 required per car
(Stabiliser bar)

Diagram Ref No 2.
Click 'Zoom in' for large parts diagram.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-16H

The product you are viewing cross references to these numbers

Powerflex Torsion Bar Rubber Mount Front. 13 mm
Sold as a pair 

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-13

The product you are viewing cross references to these numbers

Powerflex Black Series Torsion bar rubber mount, Front 13 mm
Sold as a pair

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-13BLK

The product you are viewing cross references to these numbers

Powerflex Heritage Collection torsion bar rubber mount, Front 13 mm
Sold as a pair

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-13H

The product you are viewing cross references to these numbers

Powerflex Torsion Bar Rubber Mount Front. 14 mm
Sold as a pair

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-14

The product you are viewing cross references to these numbers

Powerflex Black Series Torsion bar rubber mount, Front 14 mm

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-14BLK

The product you are viewing cross references to these numbers

Powerflex Heritage Collection torsion bar rubber mount, Front 14 mm
Sold as a pair

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.

Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-14H

The product you are viewing cross references to these numbers

Powerflex Torsion Bar Rubber Mount Front. 15 mm
Sold as a pair

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-15

The product you are viewing cross references to these numbers

Powerflex Black Series Torsion bar rubber mount, Front 15 mm
Sold as a pair

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-15BLK

The product you are viewing cross references to these numbers

Powerflex Heritage Collection torsion bar rubber mount, Front 15 mm
Sold as a pair

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-15H

The product you are viewing cross references to these numbers

Powerflex Torsion Bar Rubber Mount Front. 16 mm
Sold as a pair

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-16

The product you are viewing cross references to these numbers

Powerflex Black Series Torsion bar rubber mount, Front 16 mm
Sold as a pair

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-16BLK

The product you are viewing cross references to these numbers

Powerflex Heritage Collection torsion bar rubber mount, Front 16 mm
Sold as a pair

OEM Part Number: 90134379202



Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76

Note: Please check bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-1403-16H

The product you are viewing cross references to these numbers

Front QuickChange™ Blade Style Sway bar

1 kit required per car



Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

Front and Rear QuickChange™ Blade Style Sway Bar System

Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.

Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.

The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts

Perfect Geometry

Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.

Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.

Lightweight

Hollow bar reduces weight.

Fast and Easy Adjustment

No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.

For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

227002

The product you are viewing cross references to these numbers

Front anti roll bar bush 23.5mm.

Sold as a pair 

OEM Part Number: 99634379212

Note: Please check anti roll bar diameter before ordering.



Fits:
Porsche 986 Boxster 2.5L 1997-99 *M030 FRONT
Porsche 986 Boxster 2.7L 2000>> *M030 FRONT
Porsche 986 Boxster S 3.2L 2000>> **I029 FRONT

Porsche 987 Boxster 2.7L 2005-08 TIPTRONIC **I029 FRONT

Porsche 996 Carrera 1998-05 C2 COUPE TIPTRONIC FRONT
Porsche 996 Carrera 1998-05 C2 COUPE *M030 FRONT
Porsche 996 Carrera 1998-05 CABRIO FRONT
Porsche 996 Carrera 1998-05 TARGA MANUAL FRONT
Porsche 996 Carrera 1998-05 C4 *M030 FRONT
Porsche 996 Carrera 2001-05 C4S FRONT
Porsche 996 Turbo 2001-05 Standard Chassis FRONT

Porsche 997 MKI Carrera 2005-08 C2 MANUAL **I029 FRONT
Porsche 997 MKI Carrera 2005-08 C4 WITH PASM FRONT
Porsche 997 MKI Carrera 2005-08 C4S WITH PASM FRONT
Porsche 997 MKI Carrera 2005-08 TARGA WITH PASM FRONT
Porsche 997 MKI Turbo 2008-09 FRONT

* M030 - Cars with Sport-type chassis
** I029 - Cars with Standard chassis


Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.

Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-501-23.5

The product you are viewing cross references to these numbers

SuperPro Front Stabilizer Bar Bush D-Shape (W32mm x L33mm)
SET OF 2



Fits:
Porsche 911 1974-89
Porsche 914 1970-76

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Click 'Zoom in' for large parts diagram.
Diagram Ref No 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPF1450-

The product you are viewing cross references to these numbers

SuperPro Front Anti Roll Bar Rubber Mount / Bush.
SET OF 2



Fits:
Porsche 911/912 1965-73
Porsche 914

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPF0142-

The product you are viewing cross references to these numbers

SuperPro Stabilizer Bar Bush D-Shape (W28mm x L31mm)
SET OF 2



Fits:
Porsche 911 1965-83
Porsche 914 1970-76

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Click 'Zoom in' for large parts diagram.
Diagram Ref No 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPF0095-

The product you are viewing cross references to these numbers

Rear retro RSR adjustable sway bar.



Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

Retro RSR Adjustable Sway Bar System

Retro appearance combined with modern performance and features make these adjustable sway bars (anti roll bar) a great choice for period-correct builds.

Drop links

Appearance similar to the RSR originals with a grey colour for a discreet and retro appearance. Left and right threaded precision rod ends make easy work of adjusting front drop link length. Adjustable length makes it easy to eliminate any preload on the bar. Teflon lined rod ends never require lubrication.

Lightweight

Hollow bars weigh half as much as similar solid bars delivering equal stiffness..
Bushings

Teflon impregnated bushings are grease and maintenance free and provide smooth operation and long life.

Through-body style front bar

Installs through the body same as the pre-1974 cars and the early turbo cars. Cars not originally equipped with a through-body sway bar should purchase the optional backer plate kit.

Retro-Look Arms

Steel arms are similar to the original RSR type and have drilled adjustment positions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1-RSRRSBA

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Stabilizer Bar Bush Rear.
Stabilizer Bar Bush Rear - 18mm.
Drop Link Bush Rear - 18mm.
Fits - left and right side.



SET OF 4

Replacement for Porsche parts No. 91133379302

Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Porsche 914 1970-76 Rear

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-18H

The product you are viewing cross references to these numbers

Powerflex Black Series Stabilizer Bar Bush Rear.
Stabilizer Bar Bush Rear - 18mm.
Drop Link Bush Rear - 18mm.
Fits - left and right side.



SET OF 4

Replacement for Porsche parts No. 91133379302.

Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Porsche 914 1970-76 Rear

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-18BLK

The product you are viewing cross references to these numbers

PowerFlex Stabilizer Bar Bush D-Shape (W32mm x L35mm)
SET OF 2.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Fits:
Porsche 911 1965-98
Porsche 924 1977-88
Porsche 944 1982-91
Porsche 968 1992-95
Porsche 928 1978-95
Porsche 356 1950-65
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-209-

The product you are viewing cross references to these numbers

PowerFlex Stabilizer Bar Bush Round
Set of 2.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Fits:
Porsche 911 1965-98
Porsche 924 1977-88
Porsche 944 1982-91
Porsche 968 1992-95
Porsche 928 1978-95
Porsche 356 1950-65
Porsche 914 1970-76

Diagram Ref No 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-306-

The product you are viewing cross references to these numbers

PowerFlex Stabilizer Bar Bush Round
SET OF 2

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Fits:
Porsche 911 1965-98
Porsche 924 1977-88
Porsche 944 1982-91
Porsche 968 1992-95
Porsche 928 1978-95
Porsche 356 1950-65
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram Ref No 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-204-

The product you are viewing cross references to these numbers

Sway bar backdate mounting kit
1 kit required per car



Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

For Retro-Fitting the Through Body Anti Roll Bar

Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.

When installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.

• Required For Through-Body Sway bar Conversions
• Not required for Elephant Racing Blade Type Sway bars
• Welding required for proper installation

Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2270025_2270024

The product you are viewing cross references to these numbers

Sway bar mounting backer plate kit
1 kit required per car



Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

For Retro-Fitting the Through Body Anti Roll Bar

Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.

Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2270024

The product you are viewing cross references to these numbers

U-tab kit.



Fits:
Porsche 911 / 912 / 930 1969-89
Porsche 914 1970-76

Required when installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.

• Required For Thru-Body Swaybar Conversions
• Not required for Elephant Racing Blade Type Swaybars
• Welding required for proper installation

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2270025

The product you are viewing cross references to these numbers