Crankcase Parts

Brey Krause Deep Sump Kit.

 

For Boxster 986, 987 and 996, 997 Non-Turbo Models through 2008

Scavenging and aeration in the oil pan have been identified as a problem in 996/997, Boxster, and Cayman models experiencing high G-forces on the racetrack. The R-9095 oil pan spacer provides a simple solution. This spacer increases sump capacity by half a quart, providing more reserve to ward off starvation. The R-9095 is approved by the Porsche Club of America for use in PCA club racing Stock and Prepared class cars. The R-9095 kit clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance.

*Note: Oil pan and sump baffle are OEM parts and do not need to be purchased. Baffle spacer and pick-up tube spacer are included in this kit.

Material: 6061 T6 Aluminum Alloy
Finish: Clear Anodized
Weight: N/A
Models: Boxster, Boxster S, 996/997 models (excludes GT3 and turbocharged models) and Cayman through 2008.
Installation: For best results internal baffle passages should be modified. Modification instructions included in the kit.
Miscellaneous: Spacer adds .5 U.S. quarts to oil pan volume and improves internal baffling system. Extension bolts, baffle spacer and pick-up tube spacer included in the kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

R-9095

The product you are viewing cross references to these numbers

Crankcase banjo bolt.



Fit:
Porsche 996 Turbo 2001-005

Click 'Zoom in' for large parts diagram.
Diagram ref no 39

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90017502202

The product you are viewing cross references to these numbers

Crankcase block off plate.



Fits:
Porsche 986 Boxster 1997-04 cars without stricter emissions control (M661)
Porsche 987C Cayman MKI 2006-08
Porsche 996 Carrera 2 / Carrera 4

Click 'Zoom in' for large parts diagram.
Diagram ref no 26

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99611314053

The product you are viewing cross references to these numbers

Crankcase block off plate.



Fits:
Porsche 986 Boxster 1997-04 cars without stricter emissions control (M661)
Porsche 987C Cayman MKI 2006-08
Porsche 996 Carrera 2 / Carrera 4

Click 'Zoom in' for large parts diagram.
Diagram ref no 28

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99611334050

The product you are viewing cross references to these numbers

Crankcase Bracket.



Fits:
Porsche 964 1990-94
Porsche 993 1995-98
Porsche 996 Turbo / GT3
Porsche 997 MKI Turbo / GT3

Click 'Zoom in' for the large parts diagram.
Diagram ref no 38

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96410118701

The product you are viewing cross references to these numbers

Crankcase dowel pin.



Fits:
Porsche 996 C2 / C4 / C4S 1998-04
Porsche 986 Boxster / Boxster S 1997-04

Click 'Zoom in' for large parts diagram.
Diagram ref no 25

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610111753

The product you are viewing cross references to these numbers

Crankcase gasket.


Fits:
Porsche 996 Carrera 1998-05
Porsche 997 Carrera 2005-08
Porsche 986 Boxster 1997-05
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610136350

The product you are viewing cross references to these numbers

Crankcase gasket.



Fits:
Porsche 996 Carrera 1998-05
Porsche 997 Carrera 2005-08
Porsche 986 Boxster 1997-05
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610136350

The product you are viewing cross references to these numbers

Crankcase gasket.



Fits:
Porsche 996 Carrera 1998-05
Porsche 997 Carrera 2005-08
Porsche 986 Boxster 1997-05
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610136151

The product you are viewing cross references to these numbers

Crankcase gasket.



Fits:
Porsche 996 Carrera 1998-05
Porsche 997 Carrera 2005-08
Porsche 986 Boxster 1997-05
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610136151

The product you are viewing cross references to these numbers

Crankcase lid gasket.



Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 98C Cayman 2005-05
Porsche 996 C2 /C4 / C4S 1998-05
Porsche 997 Carrera 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 13.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610133150

The product you are viewing cross references to these numbers

Crankcase lid gasket.



Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 98C Cayman 2005-05
Porsche 996 C2 /C4 / C4S 1998-05
Porsche 997 Carrera 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 13.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610133151

The product you are viewing cross references to these numbers

Crankcase oil separator gasket, 1-3 cyl.



Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2005-08
Porsche 996 Carrera 3.4L / 3.6L 1998-05
Porsche 997.1 Carrera 3.6L / 3.8L 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610124151

The product you are viewing cross references to these numbers

Crankcase oil separator gasket, 4-6 cyl.


Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2005-08
Porsche 996 Carrera 3.4L / 3.6L 1998-05
Porsche 997.1 Carrera 3.6L / 3.8L 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610124251

The product you are viewing cross references to these numbers

Crankcase oil separator gasket, 4-6 cyl.



Fits:
Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987C.1 Cayman 2005-08
Porsche 996 Carrera 3.4L / 3.6L 1998-05
Porsche 997.1 Carrera 3.6L / 3.8L 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610124251

The product you are viewing cross references to these numbers

Crankcase oil separator.


Fits:
Porsche 986 Boxster 2.5L / 2.7L / 3.2L 1997-04
Porsche 996 Carrera 3.4L / 3.6L 1998-05
Porsche 997 Carrera 3.6L / 3.8L 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610101000

The product you are viewing cross references to these numbers

Crankcase Piston Pressure Spring.



Fits:
Porsche 993 1989-94
Porsche 996 Turbo 2001-05
Porsche 996 GT3 1999-05
Porsche 997 Turbo/GT2 2007-09
Porsche 997 Turbo/GT2 RS 2010-13
Porsche 997 GT3 2007-11

This product supersedes Porsche's old part numbers:
- 90110753100

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110753101

The product you are viewing cross references to these numbers

Crankcase Piston Pressure Spring.



Fits:
Porsche 993 1989-94
Porsche 996 Turbo 2001-05
Porsche 996 GT3 1999-05
Porsche 997 Turbo/GT2 2007-09
Porsche 997 Turbo/GT2 RS 2010-13
Porsche 997 GT3 2007-11

This product supersedes Porsche's old part numbers:
- 90110753100

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110753101

The product you are viewing cross references to these numbers

Crankcase screw short. Normally 2 per car. Sold each.



Fits:
Porsche 964 1990-94
Porsche 993 1995-98
Porsche 996 Turbo / GT3

Click 'Zoom in' for large parts diagram.
Diagram ref no 46

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96410117401

The product you are viewing cross references to these numbers

Crankcase screw short. Normally 2 per car. Sold each.



Fits:
Porsche 964 1990-94
Porsche 993 1995-98
Porsche 996 Turbo / GT3

Click 'Zoom in' for large parts diagram.
Diagram ref no 46

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96410117401

The product you are viewing cross references to these numbers

Crankcase Stud. BM 10 x 105.



Fits:
Porsche 911 1965-77 SPM
Porsche 911 Carrera 3.2L 1984-89
Porsche 911 Turbo 1978-83
Porsche 914-6 1970-76 SPM
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 996 Turbo / GT3
Porsche 997 Turbo / GT3 2007-13

Click 'Zoom in' for the large parts diagram.
Diagram ref no 3.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90006009601

The product you are viewing cross references to these numbers

Crankcase Stud. M 10 x 140. RIGHT.



Fits:
Porsche 911 1978-89 Turbo
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 996 Turbo / GT3
Porsche 997 Turbo / GT3 2007>>

This product supersedes Porsche's old part number:
- 99906222502

Click 'Zoom in' for the large parts diagram.
Diagram ref no 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90006009501

The product you are viewing cross references to these numbers

Crankcase Stud. Normally 11pcs on the RIGHT crankcase.



Fits:
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 996 Turbo / GT3
Porsche 997 Turbo / GT3 2007>>

This product supersedes Porsche's old part number:
- 95910117301

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95910117302

The product you are viewing cross references to these numbers

Crankcase Stud. Normally 11pcs on the RIGHT crankcase.



Fits:
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 996 Turbo / GT3
Porsche 997 Turbo / GT3 2007>>

This product supersedes Porsche's old part number:
- 95910117301

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95910117302

The product you are viewing cross references to these numbers

Crankcase stud short. Normally 1 per car



Fits:
Porsche 964 1990-94
Porsche 993 1995-98
Porsche 996 Turbo / GT3
Porsche 997 Turbo / GT3

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610117570

The product you are viewing cross references to these numbers

Crankcase main bolt M9x127, SET OF 14



ARP Carrier Through Bolt kit for M96/M97 engines. Factory bolts are stretch bolts and must be replaced. These are stronger and reusable and help to prevent shuffling and fretting of the main bearing saddles. Required for engines that will see anything more than normal street driving.

Fits:
Porsche 996 Carerra

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610111562

The product you are viewing cross references to these numbers

2 Quart (1.89 Litre) Deep Sump Track Oil Pan Kit.
Models: Boxster, Cayman, 996 and 997 models (excludes GT3 and turbocharged models).



This kit is best used on track only vehicles as ground clearance will become an issue due to the extension.

Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high G-forces on the racetrack. Motorsports 2 Quart Deep Sump Oil Pan Kit for all 986/996/987/997 Porsche's (excluding GT3, GT2 Turbo and DFI models). This deep sump kit is an extension added to the original oil pan, increasing oil capacity by 2 quarts, helping with oil starvation problems these vehicles commonly have.

Kit Includes:
- 2Quart Pan Extension
- Oil pickup spacer
- Extended Hexagon Head Bolts (x15)
- Aluminium spacers for baffle (x3)
- Stainless oil trap
Please order extra
1 x 703141410 Reinzosil Universal Sealing Compound
2 x 99710701600 Oil tubes

Fits:
Porsche Boxster 986 / 987
Porsche 996
Porsche 997
Porsche Cayman
Please note: This kit will not fit 996 Turbo / 996 GT2 / 996 GT3 / 997 Turbo / 997 GT2 / 997 GT3

For Installation Instructions CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

996107032XX

The product you are viewing cross references to these numbers

Engine case cover plate.


Fits:
Porsche 986 Boxster / Boxster S 1997-04
Porsche 987 Boxster / Boxster S 2005-08
Porsche 987C Cayman / Cayman S 2005-08
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 997 C2 / C2S / C4 / C4S 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610101600

The product you are viewing cross references to these numbers

Stomski Racing SR124 Engine case splitter for Porsche 911



No more hammering, chiseling, swearing, heating, prying or praying to get an 911 engine case apart. STOMSKI RACING'S SR124 ELEGANTLY and GENTLY separates the engine case halves and not only shortens the process of engine tear-down, but it also protects what doubtlessly is an expensive asset- the engine case itself. The rare #s matching early 911S sand-cast aluminum case, or the impossible to find 911 GT3 RSR case, or the early magnesium case that seems so fragile, all can NOW be protected from the threat of the block of wood and lead hammer, or the torch, or the pry-bar and chisel.
SR124 includes a CNC precision machined aluminum platform that you bolt to four head studs (ideally over #2 or #5) using the included thumbscrews. An over-sized drive-screw (stainless steel) is then threaded through the platform to mate with a high-load bearing in our specially designed rod cap that presses against the wrist pin of #2 or #5 connecting rod that is at bottom-dead-center. As you slowly use a wrench or ratchet to tighten the drive-screw, the torque of the SR124 splitter is evenly distributed through the entire crankshaft, pressing against ALL 8 main bearings. Once the slack is taken up, only GENTLE effort on the drive screw is required to split even the most belligerent of cases.
The SR124 platform is designed to work on all Mezger 911s (2.0 through 997) and includes Delrin inserts/sleeves that protect the head studs from scratches or dings.

Engine connection piece, M2 x 1.5.
Left crankcase housing.



Fits:
Porsche 993 1996>>
Porsche 996 Turbo 2001-05
Porsche 997.1 Turbo 2007-09
Porsche 996  GT3 3.6L 1999-05
Porsche 997 GT3 3.8L / 4.0L 2009-11

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99913604401

The product you are viewing cross references to these numbers

Engine Crankcase Oil Plug Cover.
Size: 22x9



Fits:
Porsche 964 1989-94
Porsche 993 1994-98
Porsche 996 GT3 2001-05

Price is for EACH

Click 'Zoom in' for large parts diagram.
Diagram ref no 61

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91110118500

The product you are viewing cross references to these numbers

Engine Crankcase Oil Plug Cover.
Size: 23x9
Brand: Genuine Porsche

Fits:
Porsche 993 1994-98
Porsche 996 GT3 2001-05
Porsche 996 TURBO 2001-05
Porsche 997 TURBO 2007-09
Porsche 997 TURBO MKII 2010-13

Price is for EACH

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91110118501

The product you are viewing cross references to these numbers

Engine crankcase stud, BM8FO x 22. 
Sold each.



Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 996 Turbo 2001-05
Porsche 996 GT3 3.6L 1999-05
Porsche 997.1 Turbo 2007-09
Porsche 997 GT3 3.6L 2006-09
Porsche 914-6 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90006010601

The product you are viewing cross references to these numbers

Engine crankcase stud, BM8FO x 22. 
Sold each.



Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 996 Turbo 2001-05
Porsche 996 GT3 3.6L 1999-05
Porsche 997.1 Turbo 2007-09
Porsche 997 GT3 3.6L 2006-09
Porsche 914-6 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90006010601

The product you are viewing cross references to these numbers

Engine crankcase stud, M8 x 52. RIGHT.
Sold each.



Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 996 Turbo 2001-05
Porsche 996 GT3 3.6L 1999-05
Porsche 997.1 Turbo 2007-09
Porsche 997 GT3 3.6L 2006-09
Porsche 914-6 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90006010201

The product you are viewing cross references to these numbers

Exhaust bolt repair kit for Boxster / 996 / 997 Carrera & Cayman Gen1 1997- 2009 (Not GT3, GT2 or TT engines)



With more and more broken exhaust bolts reported on the water-cooled engines, the headache of repairing a broken bolt is becoming epidemic. Tasks ranging from a simple exhaust system update through an engine removal, are consistently plagued by snapped, rusted, and broken exhaust manifold bolts. Rarely can an accurate removal of the broken bolt be performed with the engine in the car, and even after removal, the task is time consuming and if not done carefully can lead to a damaged head or faulty repair. STOMSKI RACING's answer to these problems is the SR067, a kit that easily, accurately, and flexibly allows you to drill out the broken bolts - with the engine still in the car- saving time and headaches. A CNC milled plate indexes precisely off the broken bolts and/or bolt holes. Using our uniquely designed Thumb Screws, the SR067 plate is locked in place (by threading a Thumb Screw over a broken bolt or by using a supplied bolt threaded through the SR067 Thumb Screw). With the included pilot drills and drill guides, the faulty bolt can be drilled out, producing a perfectly perpendicular and centered hole that if necessary can be chased with an included M8x1.25 tap.

Kit includes : anodized aluminum fixture, drill bits, tap with extension, drill jigs/guides, Thumb Screws, and hardware in a sturdy storage case.

Now also includes our SR065D drill guide.

Gasket for engine case cover plate.



Fits:
Porsche 986 Boxster / Boxster S 1997-04
Porsche 987 Boxster / Boxster S 2005-08
Porsche 987C Cayman / Cayman S 2005-08
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 997 C2 / C2S / C4 / C4S 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610133650

The product you are viewing cross references to these numbers

Heat Shield for Cylinder & Coil pack cover.  Fits left or right side 

 


Fits:
Porsche 996 C2 / C4 / C4S 2002>>
Porsche 997 MKI C2 / C2S 2005-08 COUPE/CABRIO

Diagram ref no 37.


This product supersedes Porsche's old part number:
- 996 104 445 01.

Guard plate cylinder head.

Fits:
996 Carrera C2 / C4 3.4L 1997-01
with engine code M96.01/02 and 04

Click 'Zoom in' for large parts diagram.
Diagram ref no 37.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610442502

The product you are viewing cross references to these numbers

Intermediate Shaft Cover Cap.



Fits:
Porsche 911 1978-89
Porsche 964 1989-94
Porsche 993 1994-98
Porsche 996 GT3 2000-2005
Porsche 997 GT3 2007-2011

Click 'Zoom in' for large parts diagram.
Diagram ref no 29

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010516500

The product you are viewing cross references to these numbers