Specialist Tools

Bock engine stand for workbench.



Fits:
Porsche 356
Porsche 911 912 F/G
Porsche 930
Porsche 914
Porsche 964
Porsche 993
Porsche 996
Porsche 997
Porsche 986/987 Boxster
Porsche 987c Cayman

Reference numbers:
00072120100, 000.721.201.00, 000 721 201 00, P201

For the revision of your Porsche engine, we offer engine mounts. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand.
Here you get the required trestle to be able to mount the engine mount also on a workbench or the like.
We have the engine stands for all classic Porsche as well as the 3.4-3.8L waterboxers in our program.
The stand is for engine mounts with a diameter of 60mm.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

6822

The product you are viewing cross references to these numbers

Crankcase head stud driver for Porsche All 911 964 993 996 / 997 GT3 & Turbo Models 1965-On



Double-nutting a head stud to install it into the engine case not only takes time, but can be stressful for the threads, and can lead to variations in stud depth (unless you are extra careful when removing the double nuts). Protect your hardware investment and speed installation by using STOMSKI RACING's Head Stud Driver.

Made from black oxide finished hardened steel, this uniquely designed tool threads onto the head stud but will not clamp on to the threads, making installation faster, gentler, and more accurate.

DigiDix™ Digital degree wheel sam timing system for Porsche all M96, M97, and DFI engines.



A revolution in cam timing, STOMSKI RACING's DigiDix™ - Digital Degree Wheel - provides the most accurate, easy to use degree wheel ever. No more awkward setups, questionable readings, convoluted pointers, or imprecise measurements. With DigiDix™, simply bolt the sensor/adapter to the flywheel-end of the crankshaft and secure the torsion arm. Setup time is less than one minute. You are now ready to measure crank rotation to one tenth (.1) of one degree accuracy and repeatability.

DigiDix™ includes a 3 foot cable for easy reading anywhere on the engine and fits all M96, M97, and DFI engines. Storage case included.

STOMSKI RACING - "reinventing the wheel."

Heat exchanger tester for Porsche 996 / 997



Some M96/M97 engines are experiencing oil-to-coolant intermixing. While there are potentially several sources of intermixing, faulty engine mounted oil-to-coolant heat exchangers are a major source. Now, with STOMSKI RACING's M96 Heat Exchanger Tester, you can confirm if your exchanger is faulty and needs replacing, or whether the source of the contamination is elsewhere. This high-quality tool is CNC machined from 6061 aluminum, anodized for years of service, and comes complete with all gauges, seals and hardware.

Engine stand for engine mount.



Fits:
Porsche 996/997 Carrera
Porsche 986/987 Boxster
Porsche 987C Cayman
(Not for 911 turbo and GT2/GT3 models)

For the revision of your Porsche engine, we offer this engine mount. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand. Alternatively, you can use the engine mount to mount the engine to a workbench using an additionally available bearing block.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

6806

The product you are viewing cross references to these numbers

Exhaust bolt repair kit for Porsche DFI Engines on 911/997/991/ Boxster & Cayman (9A1) 2009-Onwards



Holy broken bolts Batman! Even the latest generation of DFI (9A1) heads on the water-cooled engines are reporting broken exhaust bolts. Tasks ranging from a simple exhaust system update through an engine removal, are consistently plagued by snapped, rusted, and broken exhaust manifold bolts. Rarely can an accurate removal of the broken bolt be performed with the engine in the car, and even after removal, the task is time consuming and if not done carefully can lead to a damaged head or faulty repair. STOMSKI RACING's answer to these problems is the SR069, a kit that easily, accurately, and flexibly allows you to drill out the broken bolts - with the engine still in the car- saving time and headaches. A CNC milled plate indexes precisely off the broken bolts and/or bolt holes. Using our uniquely designed Thumb Screws, the SR069 plate is locked in place (by threading a Thumb Screw over a broken bolt or by using a supplied bolt threaded through the SR069 Thumb Screw). With the included pilot drills and drill guides, the faulty bolt can be drilled out, producing a perfectly perpendicular and centered hole that if necessary can be chased with an included M8x1.25 tap.

Kit includes anodized aluminum fixture, drill bits, tap with extension, drill jigs/guides, Thumb Screws, and hardware in a sturdy storage case. Also includes our SR065D drill guide.

Heat exchanger adapter for Porsche 996 / 997



The compact, efficient design of the M96/M97 oil-to-coolant heat exchangers has proven itself useful for other than engine cooling. By remotely mounting M96/M97 exchangers, gearbox and/or steering rack temperatures can be reduced and the life of those components significantly extended.

STOMSKI RACING's M96 Heat Exchanger Adapter allows for convenient remote mounting and includes your choice of -6 or -8 AN fittings. This high-quality adapter plate is CNC machined from 6061 aluminum, anodized for years of service, and includes seals and hardware.

Jack receptacle



Fits:
Porsche 944 from 08/1985
Porsche 964
Porsche 968
Porsche 993
Porsche 996 Carrera 2/4 / 996 Turbo
Porsche 997 Carrera 2/4 / 997 Turbo
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987C Cayman


If you want to lift your vehicle at the usual jack points, you will not get around an adapter. Only then can the vehicle safely and stably raised without risk of slipping and the underbody protection / paint are protected. This adapter can be rotated thanks to the pin geometry in the original carriage holder and sits so firmly on the vehicle.

Advantages:
• High strength thanks to 7000 aluminum alloy
• prevents scratching of the underbody protection / paint
• enables safe jacking with universal jacks
• Locking function thanks to conical journal base
• geometry adapted to the Porsche models mentioned.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1154

The product you are viewing cross references to these numbers

Oil pressure relief plug extractor Porsche 911 / 964 / 993 / 996 / 997



Tolerance between the pressure relief plug and its galley are very close, and the slightest bit of gunk, corrosion, or bur will cause the plug to freeze up in the oil passage. A magnet is rarely powerful enough to overcome the seized plug, and leaving it in place is never an option.
Using STOMSKI RACING's Oil Pressure Relief Plug Extractor makes the task of removing the stuck plug a breeze, and allows you to ensure clean oil passages, and a properly operating bypass system.

The collet-based tool slides easily into the open end of the seized plug and a simple turn or two of the internal socket head cap screw expands the tool, grasping the plug to ensure easy removal.

Anodized Aluminum.

Time-Sert™ thread repair kit for SR065/SR067/SR068 for Porsche 911 / Boxster / 996 / 997



For exhaust port studs on 911, Boxster, 996/997 or GT3 heads where the threads have been pulled, or to recover from an already improper repair, we have developed this Time-Sert(tm) kit so you may use our SR065, SR067, SR068 or SR069 tools to insert a Time-Sert and save an otherwise ruined head. In addition to the standard Time-Sert(tm) parts (short P drill, counter-bore, tap, insert tool, and 5 short inserts), our kit also includes a full length P drill, two drill jigs/bushings to guide the P drill and tap in our SR065, SR067, or SR068 fixtures, 5 full length inserts, and 5 studs.

Time-Sert(tm) is a registered trademark of TIME FASTENER COMPANY

Timing chain starp / support for Porsche 911

When assembling the case halves on the 911 engine STOMSKI RACING's SR222-GT3 Timing Chain Strap will prove instrumental in supporting the chain to allow easier mating of the halves. Proper length, radius bend, tension, and quality steel insure that this tool will provide reliable and consistent support for all your engine builds.

fits
• SR222-GT3 for the 996/997 GT2, GT3, and TT engines.