DigiDix™ Digital degree wheel sam timing system for Porsche all M96, M97, and DFI engines - SR095-M96
Code: SR095-M96/M97/DFI
DigiDix™ Digital degree wheel sam timing system for Porsche all M96, M97, and DFI engines.
A revolution in cam timing, STOMSKI RACING's DigiDix™ - Digital Degree Wheel - provides the most accurate, easy to use degree wheel ever. No more awkward setups, questionable readings, convoluted pointers, or imprecise measurements. With DigiDix™, simply bolt the sensor/adapter to the flywheel-end of the crankshaft and secure the torsion arm. Setup time is less than one minute. You are now ready to measure crank rotation to one tenth (.1) of one degree accuracy and repeatability.
DigiDix™ includes a 3 foot cable for easy reading anywhere on the engine and fits all M96, M97, and DFI engines. Storage case included.
STOMSKI RACING - "reinventing the wheel."
A revolution in cam timing, STOMSKI RACING's DigiDix™ - Digital Degree Wheel - provides the most accurate, easy to use degree wheel ever. No more awkward setups, questionable readings, convoluted pointers, or imprecise measurements. With DigiDix™, simply bolt the sensor/adapter to the flywheel-end of the crankshaft and secure the torsion arm. Setup time is less than one minute. You are now ready to measure crank rotation to one tenth (.1) of one degree accuracy and repeatability.
DigiDix™ includes a 3 foot cable for easy reading anywhere on the engine and fits all M96, M97, and DFI engines. Storage case included.
STOMSKI RACING - "reinventing the wheel."
Product Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
£440.80
Now £431.98
Orderable 
Related products
Mounting bolt kit for engine & gearbox stand
Code: SR028
Mounting bolt kit for engine & gearbox stand
Finally an elegant way to secure your engine to the engine yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminum and stainless steel for years of service.
Finally an elegant way to secure your engine to the engine yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminum and stainless steel for years of service.
£65.36
Now £64.05
Arriving soon
Connector removal tool - for VAG, Porsche
Code: 6547
Connector removal tool - for VAG, Porsche
For the removal of VAG & Porsche push and pull connectors.
• For the removal of VAG and Porsche connectors.
• Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly onto the push and pull connectors.
• Black plastic handle for easy grip.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6547
The product you are viewing cross references to these numbers
For the removal of VAG & Porsche push and pull connectors.
• For the removal of VAG and Porsche connectors.
• Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly onto the push and pull connectors.
• Black plastic handle for easy grip.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6547
6547
The product you are viewing cross references to these numbers
£31.75
Now £31.11
In stock
Connector removal tool long series - for VAG/Porsche
Code: 7859
Connector removal tool long series - for VAG/Porsche
For the removal of VAG and Porsche connectors found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly on to the push and pull connectors and opens the locking tabs as pressure is applied.
• Applications include MAF sensors, coil packs, MAP sensors, CPS sensors and light connectors.
• Soft grip T-handle.
• 20mm offset head, 160mm long. EU Registered Design.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7859
The product you are viewing cross references to these numbers
For the removal of VAG and Porsche connectors found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly on to the push and pull connectors and opens the locking tabs as pressure is applied.
• Applications include MAF sensors, coil packs, MAP sensors, CPS sensors and light connectors.
• Soft grip T-handle.
• 20mm offset head, 160mm long. EU Registered Design.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7859
7859
The product you are viewing cross references to these numbers
£19.46
Now £19.07
In stock
