Retro Trim

Door panel, LEATHER covered.

Set of 2 pcs



Fits:
Porsche 914


Click 'Zoom in' for large parts diagram.
Diagram ref no 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91455528315L

您正在查看的产品与这些编号存在交叉引用关系

Door panel, OEM BASKETWAVE pattern covered.

Set of 2 pcs



Fits:
Porsche 914


Click 'Zoom in' for large parts diagram.
Diagram ref no 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91455528315BW

您正在查看的产品与这些编号存在交叉引用关系

Door panel, PLAIN VINYL covered

Set of 2 pcs



Fits:
Porsche 914


Click 'Zoom in' for large parts diagram.
Diagram ref no 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91455528315PV

您正在查看的产品与这些编号存在交叉引用关系

带扣的彩色静态 2 点式后腰带。完整的装配再现。 2 件套

#复古修剪#

适合：
保时捷 911 1974-83
保时捷 911 1984-89
保时捷 911 Turbo 3.3L 1978-89
保时捷 964 (911) C2 1989-93
保时捷 964 (911) C4 1989-93
保时捷 964 (911) RS 3.6L 1991-93
保时捷 964 (911) RS 3.8L 1991-93
保时捷 964 (911) 涡轮 3.3L 1991-93
保时捷 964 (911) 涡轮 3.6L 1991-93
保时捷 993 (911) C2 1994-97
保时捷 993 (911) C4 1994-97
保时捷 993 (911) RS 1994-97
保时捷 993 (911) C2S 1994-97
保时捷 993 (911) C4S 1994-97
保时捷 993 (911) 涡轮 1994-96
保时捷 993 (911) GT2 1994-97
保时捷 993 (911) TURBO S 1994-97
保时捷 924 2.0L 1979-85
保时捷 924 Turbo 2.0L 1979-81
保时捷 924 Turbo 2.0L 1982-84
保时捷 924 Carrera GT 2.0L 1981 年
保时捷 924 Carrera GTS 2.0L 1982 年
保时捷 924S 2.5L 1986-87
保时捷 924S 2.5L 1988 年
保时捷 944 2.5L 8V 1982-87
保时捷 944 2.7L 8V 1988-89
保时捷 944S 2.5L 16V 1987-88
保时捷 944S2 3.0L 16V 1989-91
保时捷 944 Turbo 2.5L 8V 1985-88
保时捷 944 Turbo 2.5L 8V 1989-91
保时捷 944 Turbo S 2.5L 8V 1988>>
保时捷 968 3.0L 1992-94
保时捷 968 运动版 3.0L 1994-95
保时捷 968 CS 3.0L 1993-95
保时捷 968 Turbo S 3.0L 1993-94

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

47785779570

您正在查看的产品与这些编号存在交叉引用关系

Door panel set without vinyl, with cut-outs fits all Porsche 911 models from 1968-1973
(SET OF 2)


Sold as a Pair Left & Right side

Fits:
Porsche 911 1968-73

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90155503102

您正在查看的产品与这些编号存在交叉引用关系

Frame for window switch, Set of 3
annealed stainless steel



Fits:
Porsche 911 1973-89
Porsche 964
Porsche 993

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161363520SS

您正在查看的产品与这些编号存在交叉引用关系

Die cut ribbed rubber floor mat set, 4 pieces - front and rear.



Fits:
For LHD cars
Porsche 911 1965-68

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

RF65

您正在查看的产品与这些编号存在交叉引用关系

RS / RSA / Backdate Style Door panels in Black Leather with integrated storage pocket,.



Fits:
Porsche 911 / 930 1974 to 1989
Porsche 911 E 1976
Porsche 911 Carrera 3.2
Porsche 964 1989-94
Porsche 993 1995-96

We start with a water resistant fiberboard specifically designed for door panels and bond to it a thin layer of sound/vibration deadening foam. This makes for a quiet ride.

This set is upholstered in black Leather material. All holes in the fiberboard and insulation are precision die cut (No routers or saber saws) Die cutting makes for a perfect fit and they snap right on. You merely cut out the covering for the accessories you have and pop them on.

This set includes:
• Door handles with bezels,
• Door opener straps in red with bezels,
• Handle anchor kit with setting tool (we anchor our handle to the door, not the door panel like others), • (6) plastic panel panel retainers, As well as a set of screws and trim rings.

RS / RSA / Backdate Style Door panels in Black Leather with integrated storage pocket, Hardware & Welt Bead.



Fits:
Porsche 911/912 1965 to 1973

We start with a water resistant fiberboard specifically designed for door panels and bond to it a thin layer of sound/vibration deadening foam. This makes for a quiet ride.

This set is upholstered in black Leather material. All holes in the fiberboard and insulation are precision die cut (No routers or saber saws) Die cutting makes for a perfect fit and they snap right on. You merely cut out the covering for the accessories you have and pop them on.

This set includes:
• Black Leather panels,
• Door handles with OEM bezels,
• Door opener straps in red with OEM bezels,
• Handle anchor kit with setting tool (we anchor our handle to the door, not the door panel like others),
• (6) plastic panel panel retainers,
• screws and trim rings
• complete instructions.

RS / RSA / Backdate Style Door panels in Black Leather.



Fits:
Porsche 911/912 1965 to 1973

We start with a water resistant fiberboard specifically designed for door panels and bond to it a thin layer of sound/vibration deadening foam. This makes for a quiet ride.

This set is upholstered in black leather material. All holes in the fiberboard and insulation are precision die cut (No routers or saber saws) Die cutting makes for a perfect fit and they snap right on. You merely cut out the covering for the accessories you have and pop them on.

This set includes:
• Black vinyl panels,
• Door handles with OEM bezels,
• Door opener straps in red with OEM bezels,
• Handle anchor kit with setting tool (we anchor our handle to the door, not the door panel like others),
• (6) plastic panel panel retainers,
• screws and trim rings
• complete instructions.

RS / RSA / Backdate Style Door panels in Black Leather.



Fits:
Porsche 911 / 930 1974 to 1989
Porsche 911 E 1976
Porsche 911 Carrera 3.2
Porsche 964 1989-94
Porsche 993 1995-96

We start with a water resistant fiberboard specifically designed for door panels and bond to it a thin layer of sound/vibration deadening foam. This makes for a quiet ride.

This set is upholstered in black leather material. All holes in the fiberboard and insulation are precision die cut (No routers or saber saws) Die cutting makes for a perfect fit and they snap right on. You merely cut out the covering for the accessories you have and pop them on.

This set includes:
• Door handles with bezels,
• Door opener straps in red with bezels,
• Handle anchor kit with setting tool (we anchor our handle to the door, not the door panel like others), • (6) plastic panel panel retainers, As well as a set of screws and trim rings.

RS / RSA / Backdate Style Door panels in Black Vinyl with integrated storage pocket,.



Fits:
Porsche 911 / 930 1974 to 1989
Porsche 911 E 1976
Porsche 911 Carrera 3.2
Porsche 964 1989-94
Porsche 993 1995-96

We start with a water resistant fiberboard specifically designed for door panels and bond to it a thin layer of sound/vibration deadening foam. This makes for a quiet ride.

This set is upholstered in black vinyl material. All holes in the fiberboard and insulation are precision die cut (No routers or saber saws) Die cutting makes for a perfect fit and they snap right on. You merely cut out the covering for the accessories you have and pop them on.

This set includes:
• Door handles with bezels,
• Door opener straps in red with bezels,
• Handle anchor kit with setting tool (we anchor our handle to the door, not the door panel like others), • (6) plastic panel panel retainers, As well as a set of screws and trim rings.

RS / RSA / Backdate Style Door panels in Black Vinyl.



Fits:
Porsche 911 / 930 1974 to 1989
Porsche 911 E 1976
Porsche 911 Carrera 3.2
Porsche 964 1989-94
Porsche 993 1995-96

We start with a water resistant fiberboard specifically designed for door panels and bond to it a thin layer of sound/vibration deadening foam. This makes for a quiet ride.

This set is upholstered in black vinyl material. All holes in the fiberboard and insulation are precision die cut (No routers or saber saws) Die cutting makes for a perfect fit and they snap right on. You merely cut out the covering for the accessories you have and pop them on.


This set includes:
• Door handles with bezels,
• Door opener straps in red with bezels,
• Handle anchor kit with setting tool (we anchor our handle to the door, not the door panel like others), • (6) plastic panel panel retainers, As well as a set of screws and trim rings.

RS / RSA / Backdate Style Door panels in Black Vinyl.



Fits:
Porsche 911/912 1965 to 1973

We start with a water resistant fiberboard specifically designed for door panels and bond to it a thin layer of sound/vibration deadening foam. This makes for a quiet ride.

This set is upholstered in black vinyl material. All holes in the fiberboard and insulation are precision die cut (No routers or saber saws) Die cutting makes for a perfect fit and they snap right on. You merely cut out the covering for the accessories you have and pop them on.

This set includes:
• Black vinyl panels,
• Door handles with OEM bezels,
• Door opener straps in red with OEM bezels,
• Handle anchor kit with setting tool (we anchor our handle to the door, not the door panel like others),
• (6) plastic panel panel retainers,
• screws and trim rings
• complete instructions.

RS / RSA / Backdate Style Door panels in Black Vinyl with integrated storage pocket, Hardware & Welt Bead.



Fits:
Porsche 911/912 1965 to 1973

We start with a water resistant fiberboard specifically designed for door panels and bond to it a thin layer of sound/vibration deadening foam. This makes for a quiet ride.

This set is upholstered in black vinyl material. All holes in the fiberboard and insulation are precision die cut (No routers or saber saws) Die cutting makes for a perfect fit and they snap right on. You merely cut out the covering for the accessories you have and pop them on.

This set includes:
• Black vinyl panels,
• Door handles with OEM bezels,
• Door opener straps in red with OEM bezels,
• Handle anchor kit with setting tool (we anchor our handle to the door, not the door panel like others),
• (6) plastic panel panel retainers,
• screws and trim rings
• complete instructions.

Dashboard Speaker Section RHD
(Strictly speaking these are for the 1968 models, but can be used 1964-68)



Fits:

Porsche 911 1964-68 RHD CARS ONLY
Porsche 912 1964-68 RHD CARS ONLY

Dashboard speaker section for Porsche 911, 1964 -1968 models with 2-piece dashboards. This is NOT a dashpad or dashcover but a new replacement speaker section for the dashboard, manufactured to exact OEM specifications. Matches Porsche part number 901.552.021.20 (or 901.552.021.21 for models after February '68).

Due to sun exposure '64-'68 dashboard speaker sections are typically faded, torn, warped or cracked. Dashboards in this state are beyond restoration. In this case we recommend to install our new OEM specification dashboard speaker section to finish your 100-point restoration.

Installation requires no specific tools and is within the ability of a moderately experienced home mechanic. Please note that installation of the dashboard requires removal of the windshield.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91155203202

您正在查看的产品与这些编号存在交叉引用关系

Dashboard Main Section RHD Porsche 911 1964-68 / 912 (Strictly speaking these are for the 1968 models, but can be used 1964-68)



Fits:

Porsche 911 1964-68 RHD CARS ONLY
Porsche 912 1964-68 RHD CARS ONLY

Complete dashboard main section for Porsche 911, 1964 -1968 models with 2-piece dashboards. This is NOT a dashpad or dashcover but a new replacement dashboard, manufactured to exact OEM specifications. Matches Porsche part number 901.552.031.23.

Please note that the forward speaker section of the dashboard, Porsche part number 901.552.021.20 (or 901.552.021.21 for models after February '68) is not included but available separately.

Due to sun exposure '64-'68 dashboards typically have large cracks in the middle. The underlying dashboard cellfoam has often disintegrated, the metal frame has deformed and dashboard mounting screws are rusted out. Dashboards in this state are beyond restoration. In this case we recommend to install our new OEM specification dashboard to finish your 100-point restoration.

Our complete OEM specification dashboards are probably the best you can buy for originality and fit. The tool to mould and cast the dashboards was developed using 3-D scanning on a NOS dashboard. Grain and gloss of the vynil surface coat have been optimised to match the typical patina found on the door caps and knee pads of '65-'68 models. All dashboards are quality assured on a jig to correct/control mounting points. We guarantee a factory authentic appearance and fit.

Installation requires no specific tools and is within the ability of a moderately experienced home mechanic. Please note that installation of the dashboard requires removal of the windshield.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91155203201

您正在查看的产品与这些编号存在交叉引用关系

Armrest with handle Set of 2.



Fits:
Porsche 911 1965-1968 RHD Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG55504330

您正在查看的产品与这些编号存在交叉引用关系

清仓优惠 - 只有一套库存

保时捷 911 69-73 RHD右舵驾驶 / 手动 / 轿跑车
材质：木炭（盐和胡椒）贝纶毡

适用于长轴距 (LWB) 保时捷 911 和 912 Coupe 车型的完整 16 件地毯套件，1969-1973 年。我们的手工制作地毯套装是您可以购买的最好的产品之一，具有原创性和合身性。我们紧密匹配斯图加特工厂的规格；从材料、颜色、缝线、边缘装订，一直到纽扣和鞋跟垫。

要查看颜色选项的图片，请单击此处


该套件附带易于遵循的分步安装说明和图片。安装不需要特定的工具，并且在家庭机械师的能力范围内即可轻松完成。

有关安装说明，请单击此处

扶手两侧均带扶手。保时捷 911 69-73。特殊生产套件，驾驶员侧和乘客侧均带扶手。

#复古装饰#

适合：
保时捷 911 1969-1973 左驾汽车
保时捷 911 1969-1973 右驾汽车

单击“放大”可查看大部件图。
图表参考编号 13

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG55504000

您正在查看的产品与这些编号存在交叉引用关系

Small swatch sample of carpet colour. This is pre cut to small blocks.

Some colours in the drop down options may not be visible under actual product because not all colours and materials were used on all the models or years of the Porsches.

Please note not all samples have the edge beading on them and we can't guarantee the sample you order will have beading on it.

FLOOR CARPET COLOURS

Inner Door Top Strip Vinyl. Porsche 911 1975-86
For cars with electrically adjustable mirrors. SET OF 2



Fits: RHD CARS
Porsche 911 1975-86 COUPE RHD Cars
Porsche 911 1975-86 TARGA RHD Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Delivery Time is Normally 4 - 6 weeks on this product

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91155508RHD

您正在查看的产品与这些编号存在交叉引用关系

Reproduction interior door panels Basket Weave for early Porsche 911 08/1968-73
SET OF 2 Left & Right side



Complete ready-to-install door panels for all Porsche 911 models from 08/1968-1973

Fits:
Porsche 911 08/1968-73

Front seat bottom and backrest cushion pads.



Fits:
Porsche 911 1968-73

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90152150199

您正在查看的产品与这些编号存在交叉引用关系

"Soft Window" boot cover.

Boot cover for "Soft window" Porsche 911 Targa models 1967-1968. This is a gorgeous, OEM specification boot cover suitable for cars originally equipped with the soft window or conversions.

Our boot cover is among the best available for originality and fit. We use the original German materials that exactly match Stuttgart factory specifications including Deep grain vinyl and original specification nickle plated TENAX fasteners. All materials are precision cut, pressure glued, form-stitched and edge bound to guarantee a factory authentic fit.

The boot cover can be delivered with or without the original nickle plated TENAX fasteners. The TENAX kit includes 12 male and 12 female fasteners

To ensure our boot cover will fit perfectly on both original and replaced soft windows, TENAX fasteners are not pre-installed.

Installation is straightforward and requires no specific tools.

Delivery Time is Normally 14 - 21 working days on this product

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911561200

您正在查看的产品与这些编号存在交叉引用关系

Rear quarter panel capping in leather. SET OF 2.



Fits:
Porsche 911 1964-68 COUPE LHD and RHD Cars


Click 'Zoom in' for large parts diagram.
Diagram ref no 18

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90155509XXX

您正在查看的产品与这些编号存在交叉引用关系

Inner door top strip leather SET OF 2. (pair)



Fits:
Porsche 911 1964-68 COUPE LHD and RHD Cars
Porsche 911 1964-68 TARGA LHD and RHD Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90155508XX9

您正在查看的产品与这些编号存在交叉引用关系

Interior Restoration Kit for Porsche 911 Coupe / Targa 1965

This is for a car with standard seats w/ Pepita Black/White centers, carpeting in haargarn velour 'pepper & salt' and rear seat base surrounds and 2-piece door pockets as original for '65

Our Standard Interior Restoration Kit for the Porsche 911 1965 includes everything you typically need to
bring your interior back to factory new condition:

• Complete Carpet Set, Haargarn/Feintuft velour or Perlon felt, 16 pieces (Diagram ref 1)
• Door Panels, Ready-To-Install, pair (Diagram ref. 2)
• Door Capping Retrim Kit, front and rear (Diagram ref. 3)
• Front Seat Restoration Kit (pair), Comfort or Sport seats in Leather/Skai with Basketweave, Pepita or Corduroy inlays (Diagram ref. 4)
• Rear Seat Restoration Kit, pair (Diagram ref. 5)
• Rear Bulkhead Retrim Kit, 3/4 pieces (Diagram ref. 6)
• Rear quarter Panel Retrim Kit, pair (Diagram ref. 7)
• B-pillar Retrim Kit, pair (Diagram ref. 8)
• Dashboard Facing Retrim Kit (Diagram ref. 9)
• Headlining Kit (Diagram ref. 10) or Targa Top Restoration Kit (Not indicated)
• Straps for rear seats (Diagram ref. 11)
• Trunk Carpet set (Not indicated)
• Additional Leather/Skai, 1m²
• Step-by-step installation instructions and pictures

Following parts are not included in the standard kit (can be ordered separately):
• Complete New Door Pockets (set of 4), OEM specification (Diagram ref. 12)
• Complete New Dashboard, OEM specification (Diagram ref. 13)
• New Dashboard Speaker (Not indicated)
• Front Seat Reinforcement Kit for 2 seats (Not indicated)
• Headrest Retrim Kit, pair (Diagram ref. 14)
• Complete New Headrests, pair (Diagram ref. 14)
• Complete New Knee Protectors, 3 pieces (Diagram ref. 15)
• Complete New Door Caps, pair (Diagram ref. 16)
• Leather Steering Wheel Retrim Kit (Diagram ref. 17)
• Sunvisors, pair (Diagram ref. 18)

From 1965 through 1973 Recaro comfort seats were offered as standard equipment in the F-model.
Throughout the period different model sport seats were available as optional. Non-reclining Recaro and
'Ferrari' models were available from 1965-1968. In 1969 the reclining Recaro sport seats become available as standard equipment on the 911S and optional on others. In case you are unsure what seat type you have please send us a picture.


For more information: CLICK HERE

For Installation Instructions. Complete 16-piece carpet set for Porsche 911 1969 through 1973 CLICK HERE

For Installation Instructions. B-Post retrim Porsche 911 – all models CLICK HERE

To view pictures for the colour options please CLICK HERE

Complete interior carpet set.

This is a brand new set made out of high quality Plush material.



Fits:
Porsche 911/911SC/912E/930 1974 to 1984 Coupes
*** 84 Carrera 3.2 Use 85-89 set
RHD Cars

Please note: This is a flat felt product with no rubber layer underneath it. We recommend professional installation of this kit. This is not a project for the unexperienced DIY enthusiast. There is a fair amount of fitting and gluing involved.

Please note: Images in this listing may be a library images only and not reflect the actual product.

3 parts kit includes left and right knee protectors and astray protection with black vinyl



Complete set of knee protection strips for Porsche 911 08/1985>> & early 964. This is NOT a re-trim kit but a complete lower dashboard knee protectors, re-manufactured to exact OEM specifications. Matches Porsche part numbers 91155207000 (left), 91155206900 (right) and 91155205001 (centre on ashtray).

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91155207000

您正在查看的产品与这些编号存在交叉引用关系

Complete interior carpet set.

This is a brand new set made out of of Factory Match Perlon felt, OEM match Dark Charcoal, Black Plush or Genuine Silverknit.



Fits:
Porsche 914 1970-1971 (Stationary Pass Seat)
Porsche 914 1972>> (Adjustable Pass Seat)
LHD Cars

Please note: This is a flat felt product with no rubber layer underneath it. We recommend professional installation of this kit. This is not a project for the unexperienced DIY enthusiast. There is a fair amount of fitting and gluing involved.

Please note: Images in this listing may be a library images only and not reflect the actual product.

Complete interior carpet set.

This is a brand new set made out of high quality Plush material or Genuine Silverknit.



Fits:
Porsche 964 C2/C4 1989 -1994 Cabriolet
LHD Cars

Please note: This is a flat felt product with no rubber layer underneath it. We recommend professional installation of this kit. This is not a project for the unexperienced DIY enthusiast. There is a fair amount of fitting and gluing involved.

Please note: Images in this listing may be a library images only and not reflect the actual product.

完整的室内地毯套装。

这是一套全新套装，由高品质毛绒材料或纯银针织制成。

#复古修剪#

适合：
保时捷 964 C2/C4 1989 -1994 敞篷车
右舵汽车

请注意：这是一种扁平毛毡产品，其下方没有橡胶层。我们建议专业安装该套件。这不适合没有经验的 DIY 爱好者。涉及大量的装配和粘合。

请注意：此列表中的图像可能只是库图像，并不反映实际产品。

Complete interior carpet set.

This is a brand new set made out of high quality Plush material or Genuine Silverknit.



Fits:
Porsche 911 Carrera 3.2 1985-1989 Cabriolet
*** Includes 1984 Carrera 3.2
LHD Cars

Please note: This is a flat felt product with no rubber layer underneath it. We recommend professional installation of this kit. This is not a project for the unexperienced DIY enthusiast. There is a fair amount of fitting and gluing involved.

Please note: Images in this listing may be a library images only and not reflect the actual product.

Complete interior carpet set.

This is a brand new set made out of high quality Plush material or Genuine Silverknit.



Fits:
Porsche 911S/930 1983 to 1984 Cabriolet
*** 84 Carrera 3.2 Use 85-89 set
LHD Cars


Please note: This is a flat felt product with no rubber layer underneath it. We recommend professional installation of this kit. This is not a project for the unexperienced DIY enthusiast. There is a fair amount of fitting and gluing involved.

Please note: Images in this listing may be a library images only and not reflect the actual product.

Complete interior carpet set.

This is a brand new set made out of high quality Plush material or Genuine Silverknit.



Fits:
Porsche 911S/930 1983 to 1984 Cabriolet
*** 84 Carrera 3.2 Use 85-89 set
RHD Cars

Please note: This is a flat felt product with no rubber layer underneath it. We recommend professional installation of this kit. This is not a project for the unexperienced DIY enthusiast. There is a fair amount of fitting and gluing involved.

Please note: Images in this listing may be a library images only and not reflect the actual product.

完整的室内地毯套装。

这是由高品质毛绒材料或正品银针织制成的全新套装。

#复古装饰#

适合：
保时捷 911 Carrera 3.2 1985-1989 Targas
*** 包括 1984 年款 Carrera 3.2
左舵车


请注意：这是一款扁平的毛毡产品，其下方没有橡胶层。我们建议由专业人员安装此套件。这不是一个适合没有经验的 DIY 爱好者的项目。涉及相当多的装配和粘合工作。

请注意：此列表中的图像可能仅为库图像，并不反映实际产品。

Complete interior carpet set.

This is a brand new set made out of high quality Plush material or Genuine Silverknit.



Fits:
Porsche 911 / 911SC / 912E / 930 1974 to 1984 Targa
*** 84 Carrera 3.2 Use 85-89 set
RHD Cars

Please note: This is a flat felt product with no rubber layer underneath it. We recommend professional installation of this kit. This is not a project for the unexperienced DIY enthusiast. There is a fair amount of fitting and gluing involved.

Please note: Images in this listing may be a library images only and not reflect the actual product.