DesignTek

Exhaust Muffler / Silencer Sports Complete with Twin Stainless Steel Tail Pipes . Comes with hangers, gaskets and bolts with nuts for headers connection.



DesignTek sports deep sound muffler/exhaust offers a sportive sound and better throttle response. With secondary cat bypass to increased BHP. Complete twin adjaustable stainless steel tails

Made from T304 stainless steel.

Fits:
Porsche Boxster 987 MK1
Porsche Cayman 987C MK1



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606008703

The product you are viewing cross references to these numbers

Exhaust muffler / silencer sports system with 200 Cell Imported HIGH FLOW catalytic converters.

Pipe diameter: 60 mm



Fits:
Porsche 997.1 Turbo 2007 - 2009

DesignTek 997 Turbo Sport exhaust with 200 cell Imported HIGH FLOW catalytic converters. Complete bolt-on system.

Made from high grade T304 stainless steel. DesignTek 997 turbo exhaust system is designed to give your car a better deeper sound, fits with original Porsche tail pipes or DesignTek tail pipes.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009706

The product you are viewing cross references to these numbers

DesignTek Porsche lowering springs offer the handling characteristics and aggressive appearance that Porsche owners have been looking for, without the harsh ride characteristics of less-advanced spring systems. DesignTek Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive.



Set of 2 Lowering springs - front only

Lowers by: 30mm

Porsche 968

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3602009681

The product you are viewing cross references to these numbers

DesignTek Porsche lowering springs offer the handling characteristics and aggressive appearance that Porsche owners have been looking for, without the harsh ride characteristics of less-advanced spring systems. DesignTek Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive.



Set of 2 Lowering springs - FRONT ONLY
Lowers by: 30mm
Spring rate: 18 N/mm

Porsche 944 2.5L 8V 1982-87

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3602009441

The product you are viewing cross references to these numbers

DesignTek Porsche lowering springs offer the handling characteristics and aggressive appearance that Porsche owners have been looking for, without the harsh ride characteristics of less-advanced spring systems. DesignTek Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive.

Set of 2 Lowering springs - front only

Lowers by: 30mm

Porsche 924

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3602009241

The product you are viewing cross references to these numbers

At the heart of the unique DesignTek air filter is a specially developed polyurethane foam which acts as a filtration medium, higher both higher performance and life expectancy then paper air filters. The PYRAMID VORTEX design outer surface area will absorb larger amounts of airborne dirt particles, while still allowing air to flow freely.



High flow with excellent filteration.

This Product Fits:
Porsche 928 4.5 09/77 - 08/82
Porsche 928 4.7 S 09/79 - 07/86
Porsche 928 5.0 GT 01/89 - 07/91
Porsche 928 5.0 S 09/85 - 05/94
Porsche 928 5.0 S4 08/86 - 07/91
Porsche 928 5.4 GTS 08/91 - 11/95

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3603001211

The product you are viewing cross references to these numbers

At the heart of the unique DesignTek air filter is a specially developed polyurethane foam which acts as a filtration medium, higher both higher performance and life expectancy then paper air filters. The PYRAMID VORTEX design outer surface area will absorb larger amounts of airborne dirt particles, while still allowing air to flow freely.

High flow with excellent filteration.

This Product Fits:
Porsche 911 3.2 Carrera 08/84 - 08/89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3603001210

The product you are viewing cross references to these numbers

At the heart of the unique DesignTek air filter is a specially developed polyurethane foam which acts as a filtration medium, higher both higher performance and life expectancy then paper air filters. The PYRAMID VORTEX design outer surface area will absorb larger amounts of airborne dirt particles, while still allowing air to flow freely.
High flow with excellent filtration.



Fits:
Porsche 911 (63-83) 2.7L 09/73 - 06/77
Porsche 911 (63-83) 2.7 S Carrera 08/73 - 01/76
Porsche 911 (63-83) 3.0 SC 08/82 -07/83
Porsche 911 (63-83) 3.0 SC Carrera 03/74 - 10/83

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3603001209

The product you are viewing cross references to these numbers

DesignTek Exhaust tail pipes Quad Tube Design



DesignTek Cayenne Quad tail pipes, made from T304 stainless steel.

Bore: W 230mm x H 100mm

Fits:
Porsche Cayenne 957 - all models

* not for cars with factory sports exhaust, this product requires the larger outlets in the rear valance 4 tube tail pipe outlets. We do offer a lower valance kit if you need one. Part No. SPOILERKIT18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606405701

The product you are viewing cross references to these numbers

Exhaust Pre-Silencer Standard replacement DesignTek



Fits:
Porsche 911 2.7L / 3.0SC / 3.2 Carrera 1974-1989

*If your car is 74-85 - without oxygen sensor, please order one of blanking plug (not included with pre silencer) part number 333660211

Replacement Pre-silencer made in T304 Stainless steel with polished showcar mirror shine. Fits cars with or without oxygen sensors. Just like Porsche factory German catbypass Euro-premuffler.

*Recommend as our best replacement Exhaust Pre-silencer

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606501102

The product you are viewing cross references to these numbers

DesignTek Exhaust tail pipes 102mm Outlet



Replacement tail pipes made from stainless steel, Angle cut end, this tail pipe will also change the exhaust note very slightly deeper sound.

Fits:
Porsche 964 C2 / C4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606406401

The product you are viewing cross references to these numbers

A Voucher for £100 available when you buy this product. For more information CLICK HERE

DesignTek sports rear box exhaust produced from the highest grade stainless steel. Deeper and fuller sound.



Fits:
Porsche 955 Cayenne 3.2L V6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606005501

The product you are viewing cross references to these numbers

Tail pipe kit - left and right, clamp on type. Polished stainless steel. Outer pipe dimensions: 115mm wide x 90mm high. 
(SET OF 2 Left & Right)


Fits:

• Porsche 996 C2 3.4L 1997-08/01
• Porsche 996 C4 3.4L 1997-08/01

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99611196901S

The product you are viewing cross references to these numbers

The DesignTek Predator "Super Sport" exhaust produced to give a great deep sports car super sound that every 997 turbo driver desires plus the added benefit of a huge weight advantage over the original factory unit. At just 12.5kg the "Super Sport" exhaust section is 35kg lighter than the original factory exhaust.



DesignTek Predator 997 Turbo Sport exhaust fitted with 200 cell HSJ sports high flow catalytic converters. The system is produced with high flow 76mm T304 stainless steel tubing and fixed together with T316 Lsi welded joints. Each bend section is produced by automated CNC plasma cutting equipment and mandrel bending machinery to give the ultimate finish, flow and power.

Total weight is an amazing 12.5Kg. 35Kg Lighter than the factory exhaust.

DesignTek 997 turbo system fits with original Porsche tail pipes or DesignTek tail pipes.

Sound file & Video courtesy of the DesignTeK dealer in France


Fits:
Porsche 997 Turbo 2007>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009703

The product you are viewing cross references to these numbers

DesignTek Exhaust tail pipes twin square design.



DesignTek Twin Square Design tail pipes, bolt-on exhaust tips for stock OEM Porsche 997TT mufflers. These tips should also fit virtually any aftermarket 997TT exhaust designed that allows reinstallation of factory tips.

Made from High quality T304 stainless steel show mirror polished.
Diameter: 60 mm

Price is for a PAIR

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606409706

The product you are viewing cross references to these numbers

DesignTek introduces high performance Porsche 996 Turbo and 996 Turbo GT2 intercoolers.



The intercoolers control the side to side flow design that flows along it's 16inch length. This IC will be more than sufficient for any highly tuned 996TTs or GT2s cars to applications of upto 900hp. DesignTek Porsche intercoolers produces high-flow rate and dramatic temperature reduction which are mainly contributed by two key factors. Firstly, the great temperature reduction is accomplished by a 40% larger than stock sized intercooler cores in which each core has the capacity flow rate of 750 CFM. Secondly, which in our opinion is the most important element of an IC; the inlet/outlet end-tanks. Our end-tanks are a one piece cast aluminium construction design, formed with little to no corners and are also fully polished on the insides to increase air velocity; therefore minimizes welding points and greatly increases air flow and reduction in pressure drop which yields to improved efficiency. Also please note that all of our intercoolers come only in high polished finished for that uncompromised appearance.

The specifications:
- Dimensions Core Thickness: 3.5"
- Core Volume vs. Stock: 40% larger
- Performance Efficiency: 85%
- Flow rate: 620 CFM / side
- Leak Tested: @ 30 PSI
- Pressure Drop: less than 1%

Fits:
Porsche 996 Turbo 2000-05
Porsche 996 GT2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99611063000

The product you are viewing cross references to these numbers

DesignTek Exhaust tail pipes. Twin pipe design. Stainless steel.



Out lets 2 x 85mm diameter pipes

Fits:

• Porsche Boxster 987 2.7L 2005 -08/08
• Porsche Boxster 987 3.2/3.4L 2005-08/08
• Porsche Cayman 2.7L 987C 2006-08
• Porsche Cayman S 3.4L 987C 2005-08

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606408701

The product you are viewing cross references to these numbers

Exhaust Muffler / Silencer Sports  
(SET OF 2 Left & Right)



DesignTek Stainless steel sport exhaust, produced to give a deeper fuller sound that the standard factory exhaust boxes. Tail pipes are not included the factory tail pipes can be used with this system.

Fits:
Porsche 996 C2
Porsche 996 C4
Porsche 996 C4S

Sound = slightly deeper more than the factory standard exhaust

French
Silencieux / Silencer Sport DesignTek pour Porsche 996 Carrera
DesignTek inoxydable échappement sport en acier , pour donner un produit que les boîtes d'échappement standard d'usine complète son plus profond.

German
Auspuff / Schalldämpfer Sport DesignTek für Porsche 996 Carrera

DesignTek Edelstahl Sportauspuff , hergestellt , um ein tieferes volleren Klang , dass die Standard-WerksabgasBoxen geben.

Norwegian
Eksos lyddemper / Silencer Sports DesignTek for Porsche 996 Carrera

DesignTek Rustfritt stål sport eksos , produsert for å gi en dypere fyldigere lyd som standard fabrikk eksos bokser.

Dutch
Uitlaat Uitlaat / Knalpot Sport DesignTek voor Porsche 996 Carrera

DesignTek RVS sport uitlaat, geproduceerd om een diepere voller geluid dat de fabriek standaard uitlaat dozen geven .



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009602

The product you are viewing cross references to these numbers

DesignTek Bolt on replacement stainless steel twin tail pipe.



DesignTek Simple bolt on replacement tail pipe for factory center muffler, mirror finished stainless steel polished for a show car shine. Each pipe is 85mm double angle mitre cut.

Fits:
Porsche 997 GT3
Porsche 997 GT3RS

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606409704

The product you are viewing cross references to these numbers

DesignTek short Throw Manual Shifters for Porsches with 6-Speed gearboxes are CAD-designed and engineered direct bolt-in replacement shifters. These shifters feature counter-balanced bottom ends for more precise shifts. Extremely tight tolerances make these shifters the smoothest, most accurate shifters available. Only the finest components are assembled into this shifter. The Precision Sport Shifter for the Porsche includes a stainless steel stick, CNC machined aluminum carrier assembly and bushings, clips and the shifter accepts your stock factory knob.



Fits:
Porsche 996 1998-05 all models
Porsche 997 2005-07 all models
Porsche 986 Boxster 1997-05 all 6 speed models
Porsche 987 Boxster
Porsche 987C Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3601009961

The product you are viewing cross references to these numbers

Exhaust Catalytic Converter Pipes 100 Cell



DesignTek stainless steel sports 100 cell catalyst, with German hi-flow catalyst. Produces more air flow which in turn produces more power. Designed to give a deeper more sporter sound.

This product comes with the hole to re-fit the lambda sensor.

Fits:
Porsche 964 C2 / C4 1989-94

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Design 911 Recommends this product best value and best quality

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109641

The product you are viewing cross references to these numbers

Exhaust Catalytic Converter Bypass Pipes



DesignTek stainless steel catalyst by-pass produces more air flow which in turn produces more power. Designed to give a deeper more sporter sound.

This product comes with the hole to re-fit the lambda sensor.

Fits:
Porsche 964 C2 / C4 1989-94

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.



Design 911 Recommends this product best value and best quality

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606209641

The product you are viewing cross references to these numbers

Race cup pipe 2 part designed to replace the pre-silencer silencer box. The Cup pipe allows fast air flow and weight saving which together produces more BHP. Made from High grade T304 stainless steel.
The race pipe also changes the sound to a deeper sound, this design of race pipe was originally first fitted to the 964RS.

Made by DesignTek

Fits:
Porsche 964 C2 / C4 1990-94

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606006404

The product you are viewing cross references to these numbers

Exhaust Muffler / Silencer Rear box Race System



DesignTek Maximum power and aggressive sports car sound exactly like the factory 3.8L Supercup 964's. primarily intended for the track or race. This system has some resonance and is very sporty and aggressive. Please note this system bypass the cats and the heating system of the car.

This kit includes:
Headers
Rear Box
This kit does not include the CATS. Header to engine gaskets are not included. You can add them to the basket when you buy this exhaust.

Manifold to Head internal diameter is 39MM

Manifold to Rear silencer internal diameter is 56MM

Fits:
Porsche 964 1990-94

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606006401

The product you are viewing cross references to these numbers

Exhaust Pre-Silencer Sports DesignTek.



Fits:
Porsche 911 2.7L / 3.0SC / 3.2 Carrera 1974-1989*

*If your car is 74-85 - without oxygen sensor, please order one of blanking plug (not included with pre silencer) part number 333660211

Easy bolt-on up to 11BHP. T304 Stainless steel with polished showcar mirror shine. Fits cars with or without oxygen sensors. Just like Porsche factory German catbypass Euro-premuffler.

*Recommend as our best performing Exhaust Pre-silencer

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606501101

The product you are viewing cross references to these numbers

Exhaust Catalytic Converter Bypass Pipes

Fits:
Porsche 993 C2 / C4 / C2S / C4S / RS 1994-98

DesignTek sports catalytic bypass pipes, manufactured from T304 mandrel bent stainless steel. +15 emissions legal horsepower. Simple installation. Cat-back. Sportier/throatier than motor sound packages and other mufflers. Lightweight -saves 27 lbs. over stock therefore better handling. No cracking, splitting or failures like competitors systems! Greatly improved throttle response with lower engine temperature. System works well with all performance improvements.

Fitting this product might not pass a UK MOT approved.

Fits to BISCHOFF heat exchangers with gasket 93011119206 or GILLET heat exchangers with gasket 92811112702
Select below

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

360620993

The product you are viewing cross references to these numbers

A Voucher for £100 available when you buy this product. For more information CLICK HERE

Exhaust Muffler / Silencer Sport System



DesignTek system Fits all 1995-1998 993 Twin Turbos and Turbo S models. The DesignTek Twin Turbo Sport Exhaust System is manufactured from 16 gauge T304 Stainless Steel mandrel bent tubing. It's lightweight saves 35 lbs over original system. This system has a super throttle response with lower engine temperatures, a throaty Sportscar sound, and no resonan. The DesignTek Muffers above are the highest performance system available anywhere in the world for the 993TT. How & Why? DesignTek uses 2.5inch 63.5mm tubing though out the system for the lowest possible backpressure and best flow. More flow than anything on the market!. Fabulous sound with significant power improvement.

Fits all Porsche 993 Twin Turbo and 993 Turbo S models (1996-1998). Shaves 2/3 second on 3rd.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009303

The product you are viewing cross references to these numbers

Exhaust Muffler / Silencer Rear boxes Sports Sound (slightly louder over stock exhaust) Set of 2 Left & right 



DesignTek sport exhaust rear boxes are design to give a better throttle response, and also allowing the engine to breather. DesignTek exhaust sounds slightly deeper than the original Porsche standard exhaust. All DesignTek Exhaust Systems are manufactured from 14 - 16 gauge extra heavy duty T304 stainless steel, which eliminates the splitting, cracking and annoying resonance.

Fits:
Porsche 993 1994-97 (not Turbo & GT2)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009301

The product you are viewing cross references to these numbers

Exhaust muffler / silencer centre box. Stainless steel centre box replacement with muffler.



Fits:
Porsche 944S 2.5L 16 valve
Porsche 944S2 3.0L 16 valve

Fits only 16 VALVE ENGINES

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94411198502

The product you are viewing cross references to these numbers

Exhaust Manifold / Header with HJS equivalent CAT



Fits:
Porsche 987 Boxster 2005- 08/2008
Porsche 987C Cayman 2006- 08/2008

DesignTek sports headers and 200 cell HJS equivalent high flow cats for throaty sports car sound, but not too loud for every day driving, manufactured from extra heavy duty stainless steel, which eliminates the splitting, cracking and annoying resonance.

Coating: 40g
Cells: 200cpsi
Manufactured in United Kingdom

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109872

The product you are viewing cross references to these numbers

Exhaust Catalytic Converter Pipes Sports 200 CELL



DesignTek emissions legal horsepower - throaty sports car sound, but not too loud for every day driving, manufactured from extra heavy duty stainless steel, which eliminates the splitting, cracking and annoying resonance.

Made by DESIGNTEK

Fits:
Porsche Boxster 986 2.7L / 3.2L

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109861

The product you are viewing cross references to these numbers

Exhaust Muffler / Silencer Conversion Pipes
DesignTek GT3 style exhaust pipe conversion with 2 x 100mm centre outlets.



Fits:
Porsche 996 C2/C4/C4S
Porsche 997 GEN1 C2/C4/C4S *Use with 996 Exhaust boxes

Porsche 997 GEN1 C2/C4/C4S *Use the existing 997 Exhaust boxes, cut & weld the flange connection

Porsche 997 GEN2 C2/C4/C4S *Use the existing 997 Exhaust boxes, cut & weld the flange connection

Please note:
This exhaust pipe is used when you are fitting GT3 (centre exit) rear bumper.

DesignTek Exhaust tail pipes twin round design, Chromed.
Stainless steel quad tail pipes.



Fits:
Porsche 997 MKII 3.6L
Porsche 997 MKII 3.8L

* Not for cars with factory sport exhaust

Price is for a PAIR

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606409733

The product you are viewing cross references to these numbers

Exhaust Sports 200 Cell Catalytic Converter Pipes

DesignTek Sport 200 Cell Catalytic Converters for Porsche 997 Models. Gives a power gain of +12 to 15BHP. Made from High grade stainless steel.

Fits:
Porsche 997 Carrera 3.6L
Porsche 997 Carrera S 3.8L

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109971

The product you are viewing cross references to these numbers

DesignTek Sports Exhaust made from High Grade stainless steel.

Fits:
Porsche 997 C2 / C2S / C4 / C4S 2005>>

PLEASE NOTE
this exhaust system will accept 3.8L tail pipe straight on
If your car is 3.6L you will need DesignTek 3606409703 tail pipes
Output flange 2.25" / 58mm

Made from 14 - 16 gauge T304S with a mirroe polished finish, Giving a 8-10 bhp that you can really feel, Superb sports car sound, throaty at idle and medium speeds.

DECIBEL READINGS
IDLE : 76DBS
MAXIMUM: 102DBS

To view the BHP and torque gains on dyno results CLICK HERE

For Fitting Instructions CLICK HERE







Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009702

The product you are viewing cross references to these numbers

Exhaust Manifold / Header Equal Length DesignTek K24 for Porsche 996 Turbo



DesignTeK High Grade stainless steel equal length headers. K24 Sport stainless steel headers have been designed to increase HP and TQ on cars fitted with upgraded K24 turbochargers. The medium length and 41.5 mm primary tube diameter design is perfectly matched for the exhaust travel from the heads to the larger turbochargers for better boost response and power throughout the rev range. The smooth flow through the mandrel bends and pyramid merge collector offer superior flow characteristics as compared to the OEM headers. Power gains are increased by 17 HP and 20 Ft. TQ with no other modifications.

Fits:
Porsche 996 Turbo S /GT2 /X50

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606309604

The product you are viewing cross references to these numbers

Exhaust Manifold / Header Equal Length DesignTek K16 for Porsche 996 Turbo



DesignTeK High Grade stainless steel equal length headers.K16 Sport stainless steel headers have been designed to increase HP and TQ on cars fitted with the OEM K16 turbochargers. The short design is perfectly matched for the exhaust travel from the heads to the K16 turbo for better boost response and power throughout the rev range. The smooth flow through the mandrel bends and pyramid merge collector offer superior flow characteristics as compared to the OEM headers. Power gains are increased by 14 HP and 16 Ft. TQ with no other modifications.Adds up to 14 HP / 16 Ft. TQ
All Stainless steel construction.
Mandrel bent short primary tubes.
Flowed Pyramid merge collector.
Designed specifically for cars fitted with OEM size K16 Turbos

Fits:
Porsche 996 Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606309603

The product you are viewing cross references to these numbers

DesignTek Exhaust tail pipes 4 Tube Design.
Price is for a PAIR.



DesignTek stainless steel sports tailpipes with elegant four-tube styling.

Fits:
Porsche 996 Turbo

Porsche 996 C4S

Dimensions: 150mm x 100mm

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606409601

The product you are viewing cross references to these numbers

Exhaust Sports 200 Cell Catalytic Converter Pipes.  (SET OF 2 Left & Right)



DesignTek Sport 200 Cell catalytic converters 996 Sport Cats Give a gain of +12 to 15BHP.
Made from high grade stainless steel.

Only for cars with pre & after sensors

Fits:
Porsche 996 Carrera 3.4L / 3.6L

A Voucher for £100 available when you buy this product. For more information  CLICK HERE

Please note: These sport cats will make your car sound louder than with stock cats. If you have, or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: Sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109961

The product you are viewing cross references to these numbers

Exhaust Catalytic Converter Bypass Pipes



Fits:
Porsche 996 GT3

2ND ARY CATALYTIC BYPASS PIPES
More power and sportscar sound
More power on 996 GT3 +12HP
more sports car sound
Saves 30lbs 15 KG from rear of your 996.

Not UK MOT appoved

*A re-map to the ECU may require when fitting these cats.

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99611112108

The product you are viewing cross references to these numbers