Eurotop

Cabriolet hood with clear rear screen.
Porsche 356 with grey headiner



Fits
Porsche 356A 1958 - 1960
Porsche 356B / 356C 1960 - 1965

For cars with grey headliner

Factory exact, original design:
The hood is made of the same original materials as the original hood.

Please choose the colour version of your headliner because part of the headliner will sewn onto the area around the rear window. We need this information to make sure that the colour of the imitation leather around the window will match your headliner.

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original.
TÜV-certified and permanently sewn-in.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64456108206

The product you are viewing cross references to these numbers

Cabriolet hood with clear rear screen.
Porsche 356 with beige headiner



Fits
Porsche 356A 1958 - 1960
Porsche 356B / 356C 1960 - 1965

For cars with beige headliner

Factory exact, original design:
The hood is made of the same original materials as the original hood.

Please choose the colour version of your headliner because part of the headliner will sewn onto the area around the rear window. We need this information to make sure that the colour of the imitation leather around the window will match your headliner.

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original.
TÜV-certified and permanently sewn-in.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64456108201

The product you are viewing cross references to these numbers

Cabriolet hood tonneau cover.



Fits
Porsche 356A 1958 - 1960
Porsche 356B / 356C 1960 - 1965

Please choose black or beige inner lining

Product information:
Hood cover for covering and protecting the hood when open. The cover has two functions: - The hood cover protects the hood and exposed areas of headliner from dust and UV radiation (fading) while driving. - The hood cover prevents open hood parts from being blown about by the wind or becoming inflated and blocking the view to the rear.

Material:
Sonnenland Classic
Hood cover made of Sonnenland® canvas with separate Tenax fasteners. The fasteners have to be attached after fitting the cover to make sure that it fits properly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64456109501

The product you are viewing cross references to these numbers

Cabriolet roof headlining
Porsche 356



Fits
Porsche 356A 1958 - 1959
Porsche 356B / 356C 1960 - 1965

Product information:
This headliner is designed to cover the hood frame on the inside of the vehicle and is purely cosmetic.

Please select a colour for your headliner.

Material:
Original cloth headliner

Factory exact, original design:
The headliner is formed by the Sonnenland canvas inner layer just like the original.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64455550121

The product you are viewing cross references to these numbers

Cabriolet roof padding mat
Porsche 356



Fits
Porsche 356A 1958 - 1959
Porsche 356B / 356C 1960 - 1965

Product information:
Product information:
The padding mat is fitted between the topping and headliner. It is designed to act as insulation and to give the hood its shape.

Please select a colour for your headliner, because the padding's edge binding will be produced in the same colour as the headliner.

Material:
Foam and cotton

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64456109301

The product you are viewing cross references to these numbers

Cabriolet hood tonneau cover.



Fits
Porsche 911 1983 - 1985 Manually operated roof (non electric)

Product information:
Hood cover for covering and protecting the hood when open. The cover has two functions: - The hood cover protects the hood and exposed areas of headliner from dust and UV radiation (fading) while driving. - The hood cover prevents open hood parts from being blown about by the wind or becoming inflated and blocking the view to the rear.

Material:
Sonnenland Classic
Hood cover made of Sonnenland® canvas with separate Tenax fasteners. The fasteners have to be attached after fitting the cover to make sure that it fits properly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91156102300

The product you are viewing cross references to these numbers

Complete cabriolet hood with sewn-in rear screen.
Front and rear sections

Rear screen is clear, non-tinted



Fits
Porsche 911 1984 - 1986 Manually operated roof

Cabriolet hood does not come with headlining. Please order separately.

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original.
TÜV-certified and permanently sewn-in.

PVC window protection:
The PVC windows for our hoods are protected with our carefully sewn-on window protector and tissue paper during transport and right up until they are fully fitted. This was an intentional move on our part, and is very different from the less expensive fastening options that only involve tape and/or paper. Although this involves more work, it prevents the window protector from moving out of place or coming loose during transport and fitting, and the window from becoming scratched. It also ensures that there will not be any adhesive residues on the hood canvas/window, which are often difficult to remove.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91156105100

The product you are viewing cross references to these numbers

Cabriolet hood tonneau cover.



Fits
Porsche 911 1986 - 1989 Electrically operated roof
Porsche 964 1989 - 1994

Product information:
Hood cover for covering and protecting the hood when open. The cover has two functions: - The hood cover protects the hood and exposed areas of headliner from dust and UV radiation (fading) while driving. - The hood cover prevents open hood parts from being blown about by the wind or becoming inflated and blocking the view to the rear.

Material:
Sonnenland Classic
Hood cover made of Sonnenland® canvas with separate Tenax fasteners. The fasteners have to be attached after fitting the cover to make sure that it fits properly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911561023

The product you are viewing cross references to these numbers

Cabriolet roof headliner



Fits
Porsche 911 1983 - 1985 Manually operated roof
Porsche 911 1986 - 1989 Electrically operated roof
Porsche 964 1989 - 1994

Product information:
This headliner is designed to cover the hood frame on the inside of the vehicle and is purely cosmetic.

Material:
Headliner material similar to the original material.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91156105000

The product you are viewing cross references to these numbers

Complete cabriolet hood with sewn-in rear screen.
Front and rear sections

Rear screen is clear, non-tinted



Fits
Porsche 911 1986 - 1989 Electrically operated roof
Porsche 964 1989 - 1994

Cabriolet hood does not come with headlining. Please order separately.

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original.
TÜV-certified and permanently sewn-in.
The window is a large panel just as in the original Porsche 964 and fitted with a zip. The window is made of a clear panel just like the original. Please get in touch if you would prefer a green tinted window.

PVC window protection:
The PVC windows for our hoods are protected with our carefully sewn-on window protector and tissue paper during transport and right up until they are fully fitted. This was an intentional move on our part, and is very different from the less expensive fastening options that only involve tape and/or paper. Although this involves more work, it prevents the window protector from moving out of place or coming loose during transport and fitting, and the window from becoming scratched. It also ensures that there will not be any adhesive residues on the hood canvas/window, which are often difficult to remove.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91156105101

The product you are viewing cross references to these numbers

Cabriolet hood tonneau cover.



Fits
Porsche 944
Porsche 968

Product information:
Hood cover for covering and protecting the hood when open. The cover has two functions: - The hood cover protects the hood and exposed areas of headliner from dust and UV radiation (fading) while driving. - The hood cover prevents open hood parts from being blown about by the wind or becoming inflated and blocking the view to the rear.

Material:
Sonnenland Classic
Hood cover made of Sonnenland® canvas with separate Tenax fasteners. The fasteners have to be attached after fitting the cover to make sure that it fits properly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

941561023

The product you are viewing cross references to these numbers

Cabriolet roof headliner



Fits
Porsche 944
Porsche 968

Product information:
This headliner is designed to cover the hood frame on the inside of the vehicle and is purely cosmetic.

Material:
Headliner material similar to the original material.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94156114910

The product you are viewing cross references to these numbers

Cabriolet hood front section.

Rear screen is clear, non-tinted



Fits
Porsche 944
Porsche 968

Cabriolet hood comes with black interior lining

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

941561051

The product you are viewing cross references to these numbers

Cabriolet hood rear section with sewn-in rear screen.
Front and rear sections

Rear screen is clear, non-tinted



Fits
Porsche 944
Porsche 968

Cabriolet hood comes with black interior lining

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original, TÜV-certified, permanently sewn-in.
In the original hood, the PVC window was welded to the cloth, which meant that it often came loose. Sewing the window into place has completely solved this issue. The window is made of a clear panel just like the original. The entire window is framed by a sewn-in zip on the inside to which the headliner is connected, just as in the original.

PVC window protection:
The PVC windows for our hoods are protected with our carefully sewn-on window protector and tissue paper during transport and right up until they are fully fitted. This was an intentional move on our part, and is very different from the less expensive fastening options that only involve tape and/or paper. Although this involves more work, it prevents the window protector from moving out of place or coming loose during transport and fitting, and the window from becoming scratched. It also ensures that there will not be any adhesive residues on the hood canvas/window, which are often difficult to remove.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

941561053

The product you are viewing cross references to these numbers

Complete cabriolet hood with sewn-in rear screen.
Front and rear sections

Rear screen is clear, non-tinted



Fits
Porsche 944
Porsche 968

Cabriolet hood comes with black interior lining

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original, TÜV-certified, permanently sewn-in.
In the original hood, the PVC window was welded to the cloth, which meant that it often came loose. Sewing the window into place has completely solved this issue. The window is made of a clear panel just like the original. The entire window is framed by a sewn-in zip on the inside to which the headliner is connected, just as in the original.

PVC window protection:
The PVC windows for our hoods are protected with our carefully sewn-on window protector and tissue paper during transport and right up until they are fully fitted. This was an intentional move on our part, and is very different from the less expensive fastening options that only involve tape and/or paper. Although this involves more work, it prevents the window protector from moving out of place or coming loose during transport and fitting, and the window from becoming scratched. It also ensures that there will not be any adhesive residues on the hood canvas/window, which are often difficult to remove.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

941561901

The product you are viewing cross references to these numbers

Cabriolet hood with heated rear screen.
Porsche 981



Fits
Porsche 981 Boxster 2012 - -2016
Porsche 981 Boxster S 2012 - -2016

Headlining need to be reused from old hood or ordered separately.

Information on the rear window:
The soft top is supplied with an integrated, heated glass rear window.
The existing cables will be re-used

Material
Sonnenland A5
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.
Just as with the original hood, we use a special machine to weld a tape over the seams on the inside of the hood.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

What's included:
Ready-to-fit soft top without frame, seals and headliner - which are to be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

981561015

The product you are viewing cross references to these numbers

Cabriolet hood with heated rear screen.
Porsche 987 Boxster



Fits
Porsche 987 Boxster 2005 - 2012

Headlining need to be reused from old hood or ordered separately.

Original version:
This soft top is the same as the OEM's version, i.e. the original factory-fitted version.

Information on the rear window:
The soft top is supplied with an integrated, heated glass rear window.
The existing cables to be re-used

Material
Sonnenland A5
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.
Just as with the original hood, we use a special machine to weld a tape over the seams on the inside of the hood.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

What's included:
Ready-to-fit soft top without frame, seals and headliner - which are to be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98756190300

The product you are viewing cross references to these numbers

Cabriolet hood with heated rear screen.
Porsche 991



Fits
Porsche 991.1 2012 - 2016
Porsche 991.2 2017 - 2019

Headlining need to be reused from old hood or ordered separately.

Information on the rear window:
The soft top is supplied with an integrated, heated glass rear window.
The existing cables will be re-used

Material
Sonnenland A5
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.
Just as with the original hood, we use a special machine to weld a tape over the seams on the inside of the hood.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

What's included:
Ready-to-fit soft top without frame, seals and headliner - which are to be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

991561939

The product you are viewing cross references to these numbers

Cabriolet roof headliner.



Fits
Porsche 997 Gen 1 2005 - 2008
Porsche 997 Gen 2 2009 - 2012

Product information:
This headliner is designed to cover the hood frame on the inside of the vehicle and is purely cosmetic. The headliner is fitted with a zip which is fastened to the hood.

Material:
Headliner material similar to the original material.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99756108502

The product you are viewing cross references to these numbers

Cabriolet hood without rear screen.



Fits
Porsche 997 Gen. 2 2009 - 2012

Headlining need to be reused from old hood or ordered separately

Information on the rear window:
The hood does not include the glass window. The old window will be reused just as with the original

Material
Sonnenland A5
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.
Just as with the original hood, we use a special machine to weld a tape over the seams on the inside of the hood.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

What's included:
Ready-to-fit soft top without frame and seals - which will be re-used.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

997561902

The product you are viewing cross references to these numbers

Cabriolet hood without rear screen.
Porsche 997 Gen. 1



Fits
Porsche 997 Gen. 1 2005 - 2008

Headlining need to be reused from old hood or ordered separately.

Information on the rear window:
The hood does not include the glass window. The old window will be reused just as with the original

Material
Sonnenland A5
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.
Just as with the original hood, we use a special machine to weld a tape over the seams on the inside of the hood.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

What's included:
Ready-to-fit soft top without frame and seals - which will be re-used.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

997561901

The product you are viewing cross references to these numbers

Cabriolet roof headliner for cars with PVC rear window
Porsche 996



Fits
Porsche 996 - 1997 to 2001

Product information:
This headliner is designed to cover the hood frame on the inside of the vehicle and is purely cosmetic. The headliner is fitted with a zip which is fastened to the hood.

Material:
Headliner material similar to the original material.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99656108500

The product you are viewing cross references to these numbers

Cabriolet roof headliner cars with glass rear window
Porsche 996



Fits
Porsche 996 - 2002 to 2005

Product information:
This headliner is designed to cover the hood frame on the inside of the vehicle and is purely cosmetic. The headliner is fitted with a zip which is fastened to the hood.

Material:
Headliner material similar to the original material.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99656108501

The product you are viewing cross references to these numbers

Cabriolet hood for cars with glass rear screen.
Porsche 996



Fits
Porsche 996 - 2002 to 2005

Headlining need to be reused from old hood or ordered separately.

Information on the rear window:
The hood does not include the glass window. The old window will be reused just as with the original

Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.
The side tension cables are already included with the hood.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99656191502

The product you are viewing cross references to these numbers

Cabriolet hood with clear pvc rear screen.
Porsche 996



Fits
Porsche 996 - 1997 to 2001

Headlining need to be reused from old hood or ordered separately.

Product information:
Flexible polyglas rear window, with the same thickness (1 mm) as the original. TÜV-certified and permanently sewn-in.
In the original hood, the PVC window was welded to the cloth, which meant that it often came loose. Sewing the window into place has completely solved this issue. The window is made of a clear panel just like the original. The entire window is framed by a sewn-in zip on the inside to which the headliner is connected, just as in the original.

Enhanced features:
On the original hood, the window is welded into the hood and features a zip. In our hoods, the window is sewn-in, which prevents it from bulging and loosing its stability.

Material:
Sonnenland A5
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.
The side tension cables are already included with the hood.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

996561915

The product you are viewing cross references to these numbers

Cabriolet roof headliner



Fits
Porsche 986 Boxster 2000 - 2002

Product information:
This headliner is designed to cover the hood frame on the inside of the vehicle and is purely cosmetic. The headliner is fitted with a zip which is fastened to the hood.

Material:
Headliner material similar to the original material.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656102502

The product you are viewing cross references to these numbers

Cabriolet roof headliner



Fits
Porsche 986 Boxster 2003 - 2004

Product information:
This headliner is designed to cover the hood frame on the inside of the vehicle and is purely cosmetic. The headliner is fitted with a zip which is fastened to the hood.

Material:
Headliner material similar to the original material.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656102503

The product you are viewing cross references to these numbers

Cabriolet hood with heated rear screen - glass.



Fits
Porsche 986 Boxster 2003 to 2004

Headlining need to be reused from old hood or ordered separately.

Product information:
Replacement cabriolet hood with stitched in, heated rear screen - glass

What's included:
The soft top is supplied with an integrated, heated rear glass window.
The existing cables will be reused.

Material:
Sonnenland A5
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656191503

The product you are viewing cross references to these numbers

Cabriolet hood with green tinted pvc rear screen.
Porsche 986 Boxster



Fits
Porsche 986 Boxster- 1997 to 2002

Headlining need to be reused from old hood or ordered separately.

Product information:
Flexible polyglass rear window, with the same thickness (1 mm) as the original, TÜV-certified and permanently sewn-in.
The window has a green tint just like the original

Enhanced features:
Our PVC window is furthermore sewn-in with two seams in contrast to the original hood and is consequently a lot more sturdy. The piping inside which the side tension cable is housed (tension cable is included) is furthermore reinforced with a durable vinyl material.

Material:
Sonnenland A5
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.
The side tension cables are already included with the hood.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98656191505

The product you are viewing cross references to these numbers

Cabriolet hood with glass, heated rear screen upgrade.



Fits
Porsche 986 Boxster 1997 to 2002

Headlining needs to be reused from old hood or ordered separately.

Product information:
This hood is an upgrade hood for the Porsche Boxster 986 (model year 96-02).
The original Boxsters built during that period only featured PVC windows so this hood was never an original hood, but makes it possible to fit this model with a glass window.
The glass window is a little smaller than the PVC window because the frame's folding mechanism does not allow for a larger (non-folding) glass window.
Information on the rear window:

What's included:
The soft top is supplied with a rear glass window.

Material:
Sonnenland A5
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

986561

The product you are viewing cross references to these numbers

Cabriolet hood tonneau cover.



Fits
Porsche 993 Cabriolet - 1994 to 1998

Product information:
Hood cover for covering and protecting the hood when open. The cover has two functions: - The hood cover protects the hood and exposed areas of headliner from dust and UV radiation (fading) while driving. - The hood cover prevents open hood parts from being blown about by the wind or becoming inflated and blocking the view to the rear.

Material:
Sonnenland Classic
Hood cover made of Sonnenland® canvas with separate Tenax fasteners. The fasteners have to be attached after fitting the cover to make sure that it fits properly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

993561123

The product you are viewing cross references to these numbers

Cabriolet roof headliner



Fits
Porsche 993 Cabriolet 1994-1998

Cabriolet hood comes with black interior lining

Product information:
This headliner is designed to cover the hood frame on the inside of the vehicle and is purely cosmetic. The headliner is fitted with a zip which is fastened to the hood.

Material:
Headliner material similar to the original material.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

993561HLBLK

The product you are viewing cross references to these numbers

Cabriolet hood with sewn-in rear screen.

Rear screen is clear, non-tinted



Fits
Porsche 993 Cabriolet - 1994 to 1998

Headlining need to be reused from old hood or ordered separately.

Material:
Sonnenland Classic
Sonnenland® is a registered trademark for a very high quality canvas made in Germany and used by car manufacturers worldwide for their
original equipment, including Porsche and Mercedes
This is highly UV and abrasion resistant.
The canvas's trademark is a fish bone or criss-cross pattern on its back.
Sonnenland only refers to the material, i.e. yard goods, and not the finished hood

Sonnenland canvases comprise of three layers:



Outer layer: is made of Dralon, which is a woven acrylic fibre (polyacrylonitrile). This fabric is highly UV and abrasion resistant.

Intermediate layer: The intermediate rubber layer comprises of a waterproof synthetic
rubber material. This removes the need for any additional waterproofing. This is why
we do not offer waterproofing products and advise our customers against using any
such products offered on the market.

Inner layer: The backing used to be made of cotton (Sonnenland Classic) and is now
made of polyester

100% waterproof:
We use a kind of thread that has been specially developed for soft tops that swells up when wet and consequently effectively seals the seam holes. All of the seams on the hood are furthermore treated with a fabric seam sealer to ensure that they are 100% waterproof.

No cleaning or waterproofing required:
There will not be any need for expensive cleaning or waterproofing agents. Sonnenland® canvas is a 3-ply material and has a rubber middle layer. The rubber layer keeps water from penetrating through the roof.

Information on the rear window:
Flexible polyglas rear window, with the same thickness (1 mm) as the original, TÜV-certified, permanently sewn-in.
In the original hood, the PVC window was welded to the cloth, which meant that it often came loose. Sewing the window into place has completely solved this issue. The window is made of a clear panel just like the original. The entire window is framed by a sewn-in zip on the inside to which the headliner is connected, just as in the original.

PVC window protection:
The PVC windows for our hoods are protected with our carefully sewn-on window protector and tissue paper during transport and right up until they are fully fitted. This was an intentional move on our part, and is very different from the less expensive fastening options that only involve tape and/or paper. Although this involves more work, it prevents the window protector from moving out of place or coming loose during transport and fitting, and the window from becoming scratched. It also ensures that there will not be any adhesive residues on the hood canvas/window, which are often difficult to remove.

What's included:
Ready-to-fit soft top without frame and seals - which will be reused.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

993561900

The product you are viewing cross references to these numbers