Retro Line

Tunnel wiring harness loom.



Fits:
Porsche 912 - 1969

Complete 912 tunnel harness with original spiral colour coded wiring.

Harness will exactly fit like the original with wire tube and oil resistant tape as original.
Fusebox wiring is bundled with waxed lacing wire. Terminals have rubber sleeves.

Harness comes with detailed connection instructions. This harness has the three only for 69 model used round connectors (female-female, no longer available, to be re-used from your original harness)

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90261200300

The product you are viewing cross references to these numbers

Tunnel wiring harness loom.



Fits:
Porsche 911 / 912 - 1969

Complete 911 tunnel harness with original spiral colour coded wiring.

Harness will exactly fit like the original with wire tube and oil resistant tape as original.
Fusebox wiring is bundled with waxed lacing wire. Terminals have rubber sleeves.

Harness comes with detailed connection instructions. This harness has the three only for 69 model used round connectors (female-female, no longer available, to be re-used from your original harness)

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

901612003

The product you are viewing cross references to these numbers

Luggage compartment wiring harness loom RHD.



Fits:
Porsche 911 / 912 - 1969 Right Hand Drive (RHD)

Complete main harness for the 1969 right hand drive (RHD) 911/912 with original spiral colour coded wiring.

Harness will exactly fit like the original with wire tube and oil resistant tape as original.

Harness comes with detailed connection instructions.
Fusebox wiring bundled with waxed lacing wire.

Shown fuseboxes are not included and need to be ordered separately

As original coloured wiring.
Original neoprene terminal sleeves used (no shrink wrap)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving is very resistant to solvents and free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161200102

The product you are viewing cross references to these numbers

Luggage compartment wiring harness loom LHD.



Fits:
Porsche 911 / 912 - 1969 Left Hand Drive (LHD)

Complete main harness for the 1969 left hand drive (LHD) 911/912 with original spiral colour coded wiring.

Harness will exactly fit like the original with wire tube and oil resistant tape as original.

Harness comes with detailed connection instructions.
Fusebox wiring bundled with waxed lacing wire.

Shown fuseboxes are not included and need to be ordered separately

As original coloured wiring.
Original neoprene terminal sleeves used (no shrink wrap)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving is very resistant to solvents and free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161200102

The product you are viewing cross references to these numbers

Alternator wiring harness loom for motorola unit.



Fits:
Porsche 901 / 911 - 1964 to 1965

For Motorola alternator only

Harness from alternator to regulator with rubber terminal boot included. (Motorola)

(Only for 1964 901 and 1965 911)

As original coloured wiring.

Original neoprene terminal sleeves used, (no shrink wrap)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

The high flex sleeving is very resistant to solvents, free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161203710

The product you are viewing cross references to these numbers

Ignition switch wiring harness loom spade type connector.



Fits:
Porsche 911 / 912 - 1965 to 1968

Molded 8 pole flat, spade connector, wiring to ignition switch (901 612 003 01) and headlight switch.

This is for the ignition switch that has the flat, spade type electrical connectors.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161200301

The product you are viewing cross references to these numbers

Ignition switch wiring harness loom bullet type connector.



Fits:
Porsche 911 / 912 - 1965 to 1968

Molded 8 pole bullet connector, wiring to original type ignition switch (901.613.101.10) and headlight switch.

This is for the ignition switch that has the round, bullet type electrical connectors.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161200302

The product you are viewing cross references to these numbers

Engine harness wiring loom.



Fits:
Porsche 944 turbo - from 1987

Complete engine Harness for the Porsche 944 turbo

• Female 35 pin connector to DME
• Female 25 pin connector to knock control

Connectors for:
• Diagnosis
• Altitude correction unit (chassis part to be re-used from old harness)
• Reference mark sensor
• Speed sensor
• Cycle valve
• Oxygen sensor
• 4 x injector
• Test socket
• DME connection plug
• Knock sensor
• Idle positioner
• Temp switch turbo charger
• Temp switch NTC2
• Water temp
• Oil press
• Throttle switch
• Airflow sensor

Special order made to order parts please allow 2 – 4 weeks

Comes with detailed connection diagram.

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9516070210

The product you are viewing cross references to these numbers

Engine harness wiring loom.



Fits:
Porsche 944 turbo - up to 1986

Complete engine Harness for the Porsche 944 turbo

• Female 35 pin connector to DME
• Female 25 pin connector to knock control

Connectors for:
• Diagnosis
• Altitude correction unit (chassis part to be re-used from old harness)
• Reference mark sensor
• Speed sensor
• Cycle valve
• Oxygen sensor
• 4 x injector
• Test socket
• DME connection plug
• Knock sensor
• Idle positioner
• Temp switch turbo charger
• Temp switch NTC2
• Water temp
• Oil press
• Throttle switch
• Airflow sensor

Special order made to order parts please allow 2 – 4 weeks

Comes with detailed connection diagram.

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9516070210

The product you are viewing cross references to these numbers

Engine harness wiring loom.



Fits:
Porsche 968 - 1992 to 1995

Engine Harness for the Porsche 968 (manual)

Complete engine harness

• Female 55 pin connector to DME

Connectors for:
• Diagnosis
• 2 pole Perf.data change
• 14 pole male to MF +DI T21
• Tank vent valve
• Reference mark sensor
• Camshaft control valve
• Oil temp sensor
• Speed sensor
• Oxygen sensor
• 4 x injector
• Test socket
• DME connection plug
• Knock sensor 1 & 2
• Engine temp. sensor
• Idle positioner
• Temp switch
• Water temp
• Oil press
• Throttle potentiometer
• Hall sender
• Airflow sensor
• Oil level warning switch

Special order made to order parts please allow 2 – 4 weeks

Comes with detailed connection diagram.

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94460717304

The product you are viewing cross references to these numbers

Starter motor wiring harness loom.



Fits:
Porsche 968 - 1992 to 1995

Starter motor / alternator cable for Porsche 968 1992-1995 (not for Tiptronic)

Including starter boot and 2 pole male connector.

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94460702904

The product you are viewing cross references to these numbers

Engine wiring harness loom.



Fits:
Porsche 964 Carrera 2 / Carrera 4 Manual - 1991 to 1994
Engine code M64.01 and M64.03

Complete engine harness for the 964 Carrera 2 / Carrera 4

Please note that the chassis part and cover from the 12 pole male are no longer available new and need to be re-used from your original harness (2 min job instructions included)

Special order made to order parts please allow 2 – 4 weeks

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96460701603

The product you are viewing cross references to these numbers

Engine wiring harness loom.



Fits:
Porsche 964 Carrera 2 Tiptronic - 1991 to 1994
Engine code M64.02

Complete engine harness for the 964 Carrera Tiptronic.

Please note that the chassis part and cover from the 12 pole male are no longer available new and need to be re-used from your original harness (2 min job instructions included)

Special order made to order parts please allow 2 – 4 weeks

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96460701602

The product you are viewing cross references to these numbers

Engine wiring harness loom.



Fits:
Porsche 964 Carrera 4 - 1989 to 1990
Engine code M64.01

Complete engine harness for the 964 1989 -1990 Carrera 4

Please note that the chassis part and cover from the 12 pole male are no longer available new and need to be re-used from your original harness (2 min job instructions included)

Special order made to order parts please allow 2 – 4 weeks

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96460701601

The product you are viewing cross references to these numbers

DME wiring harness.



Fits:
Porsche 964 Carrera 2 tiptronic (M249) up to 1991

DME harness for 964 Complete harness with 55PIN ECU/DME connector to Motronic Box


Connectors for:

• T16
• Version coding
• Coding plug
• Oxygen sensor
• Pressure sensor
• Air flow sensor
• Throttle valve switch
• Idle speed sensor
• Resonance plate
• Tank vent valve
• Knock sensor 1
• Knock sensor 2
• NTC temp sensor
• Speed sender
• Ignition coil 1
• Ignition coil 2
• Ignition control unit 1
• Ignition control unit 2
• T31 connection
• Timing belt switch
• Hall sender

Special order made to order parts please allow 2 – 4 weeks

Comes with detailed connection diagram.

Loom is made to order

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96461217303

The product you are viewing cross references to these numbers

Cup / drinks holder. Side mount



Fits
Fits 718 Boxster, 718 Cayman, 718 Spyder, 911, Boxster, Cayman.

** Any Porsche with this centre console design will fit ** (some may be missing from below, I will update as best I can)

Porsche 991 ALL
Porsche 718 ALL
Porsche 981 ALL
Porsche 911 ALL 2011+
Porsche Boxster ALL 2013+
Porsche Cayman ALL 2014+

I'm a fan of the fold out cup holders but if you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons. This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans. This is a custom made cupholder to utilize un-used space in the car and add an additional convenience to your experience to all other makes and models. Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. 1x Side Bracket. 1x Cup Bracket. Satin Black. Plug and play. 5-15 min install time.

Fitment: 2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. YETI, Blender bottles, and larger size tumblers fit great.

Plug & Play: Minimal to no tools required. Pull on the centre console passenger side cover. Slip the side bracket in. It will slide into place and you will feel it lock into the casting behind the side cover. Screw the cup bracket into the side bracket. Slide cup onto the bracket.




Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

LCD display in MPH replacement for Porsche 964 / 993 instrument clusters

This LCD panel fits in to the Rev counter for cars with M659 on-board COMPUTER the LCD panel this should only be fitted by a professional

Fits:
Porsche 964 1989-94
Porsche 993 1994-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

993641312XX

The product you are viewing cross references to these numbers

Centre console cup / drinks holder. Low Profile Edition



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

Centre console cup / drinks holder. Phone Holder Edition - Additional slot is added to fit your phone



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

Centre console cup / drinks holder, Standard Edition



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

Blank key shank in silver Fuchs Retro Porsche



Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911538900SL

The product you are viewing cross references to these numbers

Blank key shank in black Fuchs Retro Porsche



Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911538900BK

The product you are viewing cross references to these numbers

Blank key shank in golden Fuchs Retro Porsche



Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911538900GL

The product you are viewing cross references to these numbers

Seat side bolster foam. for sports seat.



Fits:
Porsche 911 1970-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9115211

The product you are viewing cross references to these numbers

Seat base centre foam. for sports seat.



Fits:
Porsche 911 1970-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91152110200

The product you are viewing cross references to these numbers

Backrest side bolster foam for sports seat.



Fits:
Porsche 911 1970-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91152119

The product you are viewing cross references to these numbers

Backrest centre foam for sports seat.



Fits:
Porsche 911 1970-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91152110400

The product you are viewing cross references to these numbers

Indicator stalk column switch stalks. Billet alloy stalk replacements.



Fits:
Porsche 911 1976-89

Please note: You will require to transfer the spring from existing assembly onto new stalks. New spring is not included with the stalks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161330506

The product you are viewing cross references to these numbers

Phone holder bracket.



Fits
Porsche 964 1989 - 1994
Porsche 993 1994 - 1998

This phone holder allows you to securely mount your phone into the 964 and 993 range of cars.
Mounted to the ashtray, this allows the phone to be viewed in landscape

This is 3D printed using carbon fibre infused plastic

Please note that this is a thermally printed item and on a rare occasion may deform if exposed to high temperatures. If this happens it can be reshaped by placing briefly into warm water

Switch blank cover.



Fits
Porsche 964 1989 - 1994
Porsche 993 1994 - 1998

Switch blanking cover for all of those unwanted switches

Fits various dash switches from the 964 and 993

This is 3D printed using carbon fibre infused plastic

Please note that this is a thermally printed item and on a rare occasion may deform if exposed to high temperatures. If this happens it can be reshaped by placing briefly into warm water

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911613CVR

The product you are viewing cross references to these numbers

PAIR of headlamp adjuster legs.
cars with M605 (Headlamp range control).



Fits
Porsche 911 3.2 Carrera 1987-1989
Porsche 964 (all models) 1989-1994

These headlamp adjuster legs fit the late 3.2 Carrera and 964 with the M605 (Headlight range control) option.
These are the pneumatically adjustable headlamps and the adjusters are not normally available as spare parts.

Save yourself the expense of new headlamps with a pair of these adjuster legs.

Sold as a pair with one leg per headlamp

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911631ADJ

The product you are viewing cross references to these numbers

Blank Key Shank in black 70's Retro.



Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911538903BK

The product you are viewing cross references to these numbers

Blank Key Shank in golden colour 70's Retro.



Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911538903GL

The product you are viewing cross references to these numbers

Pair of heater flap blanking plates.



Fits
Porsche 911 1969 to 1989

3D printed in ABS plastic this blanking plate is used when deleting the 911 heater flap boxes

Lightweight and suitable for cars without heating

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91121129700

The product you are viewing cross references to these numbers

Weber IDF throttle arms. Required to fit Weber carburettors to 912 / 356.
Laser cut. yellow zinc passivate plated.

Fuel pump blanking plate with gasket for electric pump conversion



Fits:
Porsche 912
Porsche 356

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

61610844999

The product you are viewing cross references to these numbers

Engine tray to exhaust support bracket.



Fits:
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

61610674000

The product you are viewing cross references to these numbers

Bosch Number 0 438 100 006



Fits:
Porsche 911 2.7L 9/1973 - 6/1977
Porsche 911 2.7 S 9/1973 - 8/1977

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

This unit is sold on an exchange basis, A surcharge of £1000.00 will be held and then refunded when the old one is returned.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911110935AX

The product you are viewing cross references to these numbers