Rennline Rear Subframe Stabilizer With Tie Downs (Rear). Porsche 986 Boxster / 987 Cayman / 987 Boxster - E35SB96
Code: E35SB96
Rennline Rear Subframe Stabilizer With Tie Downs (Rear).
Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman
Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes with the extreme loads being put on them. This negates your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation. Also available as a set including front tie downs, or as just the rear tie down set without the stabilizer bar.
Note: Pictures may not show actual product.
Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman
Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes with the extreme loads being put on them. This negates your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation. Also available as a set including front tie downs, or as just the rear tie down set without the stabilizer bar.
Note: Pictures may not show actual product.
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
£248.00
Now £243.04
In stock 
Related products
Rennline Race Hook. UNIVERSAL
Code: E01X
Rennline Race Hook. UNIVERSAL
5, 6, 7, or 8 inch.
Rennline's steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events.
Note: Pictures may not show actual product.
5, 6, 7, or 8 inch.
Rennline's steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events.
Note: Pictures may not show actual product.
Prices from: £66.64
Rennline Tie Downs. UNIVERSAL
Code: E04
Rennline Tie Downs. UNIVERSAL
SET OF 2
Rennline's tie-down brackets are made of either stainless steel, or mild steel in red powdercoat. These brackets are available in four variations: straight, 90°, 66°, and 45° to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.
The 66° tie downs are designed specifically for 996/997 with upgraded rear sway bars. GT2 and GT3 cars will also use the 66° tie down.
Note: These come in sets of 2
Note: Pictures may not show actual product.
SET OF 2
Rennline's tie-down brackets are made of either stainless steel, or mild steel in red powdercoat. These brackets are available in four variations: straight, 90°, 66°, and 45° to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.
The 66° tie downs are designed specifically for 996/997 with upgraded rear sway bars. GT2 and GT3 cars will also use the 66° tie down.
Note: These come in sets of 2
Note: Pictures may not show actual product.
Prices from: £55.86
Rennline retractable tow hook set. Porsche 911 74-89 or UNIVERSAL
Code: E1718
Rennline retractable tow hook set. FRONT & REAR.
Fits:
Porsche 911/930 1974-89 FRONT & REAR
A majority of newer factory built race cars feature retractable tow hooks, and now Rennline has engineered a tow hook for your custom race car that offers the same advantages. These retractable tow hooks are available as "bolt on" units for any corner of your 1974-1989 911, 930, 912 with fiberglass bumpers, or when used with our universal mounting brackets, these hooks can be mounted in many different configurations based on your specific needs. Made from powder-coated steel with a spring-loaded retractable hook and comes with (2) tow stickers. Your shins will thank you.
To see this hook in action, CLICK HERE
Note: Pictures may not show actual product.
Fits:
Porsche 911/930 1974-89 FRONT & REAR
A majority of newer factory built race cars feature retractable tow hooks, and now Rennline has engineered a tow hook for your custom race car that offers the same advantages. These retractable tow hooks are available as "bolt on" units for any corner of your 1974-1989 911, 930, 912 with fiberglass bumpers, or when used with our universal mounting brackets, these hooks can be mounted in many different configurations based on your specific needs. Made from powder-coated steel with a spring-loaded retractable hook and comes with (2) tow stickers. Your shins will thank you.
To see this hook in action, CLICK HERE
Note: Pictures may not show actual product.
£320.00
Now £304.00
Orderable
