Sealey Air/Hydraulic Press 20tonne Floor Type - YK20FAH
Code: YK20FAH
Sealey Air/Hydraulic Press 20tonne Floor TypeSteel frame construction with side mounted air motor powering hydraulic pump unit. Sliding hydraulic ram assembly giving 400mm of lateral travel for off-centre pressing applications. Fitted with ram pressure gauge. Supplied with flat pressing plate/V-blocks.• Table Aperture: 105mm.
• Working Table Width: 550mm.
• Ram Stroke: 190mm.
• Steel frame construction.
• Side mounted air motor powering hydraulic pump unit.
• Sliding hydraulic ram assembly giving 400mm of lateral travel for off-centre pressing applications.
• Fitted with ram pressure gauge.
• Supplied with flat pressing plate/V-blocks.
• Model No. YK20FAH• Steel frame construction with side mounted air motor powering hydraulic pump unit.
• Sliding hydraulic ram assembly giving 400mm of lateral travel for off-centre pressing applications.
• Fitted with ram pressure gauge.
• Supplied with flat pressing plate/V-blocks.20tonne Floor Type Air/Hydraulic Press
• Working Table Width: 550mm.
• Ram Stroke: 190mm.
• Steel frame construction.
• Side mounted air motor powering hydraulic pump unit.
• Sliding hydraulic ram assembly giving 400mm of lateral travel for off-centre pressing applications.
• Fitted with ram pressure gauge.
• Supplied with flat pressing plate/V-blocks.
• Model No. YK20FAH• Steel frame construction with side mounted air motor powering hydraulic pump unit.
• Sliding hydraulic ram assembly giving 400mm of lateral travel for off-centre pressing applications.
• Fitted with ram pressure gauge.
• Supplied with flat pressing plate/V-blocks.20tonne Floor Type Air/Hydraulic Press
Related products
Sealey Press Pin Set 8pc
Code: YKPP8
Sealey Press Pin Set 8pcSet of eight press pins, 2-20tonne capacity, with ram adaptor all finished in a yellow phosphate finish for added corrosion resistance. Presented in mountable bracket with fixing points. Suitable for use with presses which have a female ram assembly diameter of 25mm and are secured with a bolt. These pins are suitable for the following Sealey model numbers manufactured from October 2008 onwards; YK15BP, YK15FFP, YK20F, YK20FFP, YK20FAH, YK209F, YK30F, YK30FFP, YK309FAH, YK509F, YK50FFP, YK509FAH, YK759F, YK759FAH.• Set of eight press pins, 2-20tonne capacity, with ram adaptor all with a yellow phosphate finish for added corrosion resistance.
• Presented in mountable bracket with fixing points.
• Suitable for use with presses which have a female ram assembly diameter of 25mm and are secured with a bolt.
• Suitable for the following Sealey model numbers manufactured from October 2008 onwards; YK15BP, YK15FFP, YK20F, YK20FAH, YK209F, YK20FFP, YK30F, YK30FFP, YK309FAH, YK509F, YK50FFP, YK509FAH, YK759F, YK759FAH.
• Model No. YKPP8• Set of eight press pins, 2-20tonne capacity, with ram adaptor all finished in a yellow phosphate finish for added corrosion resistance.
• Presented in mountable bracket with fixing points.
• Suitable for use with presses which have a female ram assembly diameter of 25mm and are secured with a bolt.
• These pins are suitable for the following Sealey model numbers manufactured from October 2008 onwards; YK15BP, YK15FFP, YK20F, YK20FFP, YK20FAH, YK209F, YK30F, YK30FFP, YK309FAH, YK509F, YK50FFP, YK509FAH, YK759F, YK759FAH.8pc Press Pin Set
• Presented in mountable bracket with fixing points.
• Suitable for use with presses which have a female ram assembly diameter of 25mm and are secured with a bolt.
• Suitable for the following Sealey model numbers manufactured from October 2008 onwards; YK15BP, YK15FFP, YK20F, YK20FAH, YK209F, YK20FFP, YK30F, YK30FFP, YK309FAH, YK509F, YK50FFP, YK509FAH, YK759F, YK759FAH.
• Model No. YKPP8• Set of eight press pins, 2-20tonne capacity, with ram adaptor all finished in a yellow phosphate finish for added corrosion resistance.
• Presented in mountable bracket with fixing points.
• Suitable for use with presses which have a female ram assembly diameter of 25mm and are secured with a bolt.
• These pins are suitable for the following Sealey model numbers manufactured from October 2008 onwards; YK15BP, YK15FFP, YK20F, YK20FFP, YK20FAH, YK209F, YK30F, YK30FFP, YK309FAH, YK509F, YK50FFP, YK509FAH, YK759F, YK759FAH.8pc Press Pin Set
Sealey Safety Guard for YK759F and YK759FAH
Code: YKSG75
Sealey Safety Guard for YK759F & YK759FAHLightweight aluminium frames with tough steel mesh. Adjustable guard protects the user and/or passer by from being injured if workpiece is accidently dislodged under load. Bolts onto either side of the table and features five height increments, allowing the workpiece to be placed onto table with no obstruction. One way spring loaded locking clips then allow the guard to be pulled up quickly and snap straight into position for full protection.• Lightweight aluminium frame with tough steel mesh.
• Adjustable guard protects the user and/or passer by from being injured if workpiece is accidently dislodged under load.
• Bolts onto either side of the table and features five height increments, allowing the workpiece to be placed onto table with no obstruction.
• One way spring loaded locking clips then allow the guard to be pulled up quickly and snap straight into position for full protection.
• Model No. YKSG75• Lightweight aluminium frame with tough steel mesh.
• Adjustable guard protects the user and/or passer by from being injured if workpiece is accidently dislodged under load.
• Bolts onto either side of the table and features five height increments, allowing the workpiece to be placed onto table with no obstruction.
• One way spring loaded locking clips then allow the guard to be pulled up quickly and snap straight into position for full protection.Safety Guard for YK759F & YK759FAH Presses
• Adjustable guard protects the user and/or passer by from being injured if workpiece is accidently dislodged under load.
• Bolts onto either side of the table and features five height increments, allowing the workpiece to be placed onto table with no obstruction.
• One way spring loaded locking clips then allow the guard to be pulled up quickly and snap straight into position for full protection.
• Model No. YKSG75• Lightweight aluminium frame with tough steel mesh.
• Adjustable guard protects the user and/or passer by from being injured if workpiece is accidently dislodged under load.
• Bolts onto either side of the table and features five height increments, allowing the workpiece to be placed onto table with no obstruction.
• One way spring loaded locking clips then allow the guard to be pulled up quickly and snap straight into position for full protection.Safety Guard for YK759F & YK759FAH Presses
Sealey Safety Guard for YK509F, YK509FAH, YK50FFP
Code: YKSG50
Sealey Safety Guard for YK509F, YK509FAH, YK50FFPLightweight aluminium frames with tough steel mesh. Adjustable guard protects the user and/or passer by from being injured if workpiece is accidently dislodged under load. Bolts onto either side of the table and features five height increments, allowing the workpiece to be placed onto table with no obstruction. One way spring loaded locking clips then allow the guard to be pulled up quickly and snap straight into position for full protection.• Lightweight aluminium frame with tough steel mesh.
• Adjustable guard protects the user and/or passer by from being injured if workpiece is accidently dislodged under load.
• Bolts onto either side of the table and features five height increments, allowing the workpiece to be placed onto table with no obstruction.
• One way spring loaded locking clips then allow the guard to be pulled up quickly and snap straight into position for full protection.
• Model No. YKSG50• Lightweight aluminium frame with tough steel mesh.
• Adjustable guard protects the user and/or passer by from being injured if workpiece is accidently dislodged under load.
• Bolts onto either side of the table and features five height increments, allowing the workpiece to be placed onto table with no obstruction.
• One way spring loaded locking clips then allow the guard to be pulled up quickly and snap straight into position for full protection.Safety Guard for YK509F, YK509FAH, YK50FFP Presses
• Adjustable guard protects the user and/or passer by from being injured if workpiece is accidently dislodged under load.
• Bolts onto either side of the table and features five height increments, allowing the workpiece to be placed onto table with no obstruction.
• One way spring loaded locking clips then allow the guard to be pulled up quickly and snap straight into position for full protection.
• Model No. YKSG50• Lightweight aluminium frame with tough steel mesh.
• Adjustable guard protects the user and/or passer by from being injured if workpiece is accidently dislodged under load.
• Bolts onto either side of the table and features five height increments, allowing the workpiece to be placed onto table with no obstruction.
• One way spring loaded locking clips then allow the guard to be pulled up quickly and snap straight into position for full protection.Safety Guard for YK509F, YK509FAH, YK50FFP Presses
