Sealey Work Floor Ramp - DRP21
Code: DRP21
Sealey Work Floor RampHeavy-duty polyethylene ramp compatible with Model No. DRP20. Fitted with locating pins which slot into DRP20 work floor for added stability when manoeuvring drum. Manufactured with non slip resistant texture. Features user friendly gradient for easy loading.• Heavy-duty polyethylene ramp compatible with DRP20.
• Fitted with locating pins which slot into DRP20 work floor for added stability when manoeuvring drum.
• Manufactured with non slip resistant texture.
• Features user friendly gradient for easy loading.
• Model No. DRP21• Heavy-duty polyethylene ramp compatible with DRP20.
• Fitted with locating pins which slot into DRP20 work floor for added stability when manoeuvring drum.
• Manufactured with non slip resistant texture.
• Features user friendly gradient for easy loading.Work Floor Ramp
• Fitted with locating pins which slot into DRP20 work floor for added stability when manoeuvring drum.
• Manufactured with non slip resistant texture.
• Features user friendly gradient for easy loading.
• Model No. DRP21• Heavy-duty polyethylene ramp compatible with DRP20.
• Fitted with locating pins which slot into DRP20 work floor for added stability when manoeuvring drum.
• Manufactured with non slip resistant texture.
• Features user friendly gradient for easy loading.Work Floor Ramp
Related products
Sealey Barrel Bund 1340 x 800 x 335mm
Code: DRP10
Sealey Barrel Bund 1340 x 800 x 335mmThe final stages of The Control of Pollution (Oil Storage) Regulations 2001, came into effect on 1st September 2005. Anyone storing oil in containers greater than 200ltr are affected by the regulations. Any tank, container or drum must be bunded. The bund must have a capacity of not less than 110% of the largest or 25% of their total aggregate storage capacity, whichever is the greater. All Sealey Barrel Bunds comply with these regulations.
Manufactured from heavy-duty 3.5mm steel. Removable galvanized steel grid platform. Bund can be accessed and moved from all four sides.• Capacity: 2 x 205ltr drums.
• Complies with the Control of Pollution Oil Storage Regulations 2001 which came into effect 1st March 2001.
** ADDITIONAL POINTS IF DETAILS OF REGS REQUIRED **
• These state that any container, tank or drum over 200ltr capacity (with exceptions) must be bunded.
• This bund must take at least 110% capacity of the oil storage container.
** END **
• Manufactured from heavy-duty 3.5mm steel.
• Removable galvanized steel grid platform.
• Bund can be accessed and moved from all four sides.
• Model No. DRP10ARE YOU COMPLIANT?
The final stages of The Control of Pollution (Oil Storage) Regulations 2001, came into effect on 1st September 2005.
Anyone storing oil in containers greater than 200ltr are affected by the regulations.
Any tank, container or drum must be bunded.
The bund must have a capacity of not less than 110% of the largest or 25% of their total aggregate storage capacity, whichever is the greater.
• The DRP10 Barrel Bund complies with these new regulations.
• Manufactured from heavy-duty 3.5mm steel.
• Removable galvanized steel grid platform.
• Bund can be accessed and moved from all four sides.Steel Barrel Bund
1340 x 800 x 335mm
Manufactured from heavy-duty 3.5mm steel. Removable galvanized steel grid platform. Bund can be accessed and moved from all four sides.• Capacity: 2 x 205ltr drums.
• Complies with the Control of Pollution Oil Storage Regulations 2001 which came into effect 1st March 2001.
** ADDITIONAL POINTS IF DETAILS OF REGS REQUIRED **
• These state that any container, tank or drum over 200ltr capacity (with exceptions) must be bunded.
• This bund must take at least 110% capacity of the oil storage container.
** END **
• Manufactured from heavy-duty 3.5mm steel.
• Removable galvanized steel grid platform.
• Bund can be accessed and moved from all four sides.
• Model No. DRP10ARE YOU COMPLIANT?
The final stages of The Control of Pollution (Oil Storage) Regulations 2001, came into effect on 1st September 2005.
Anyone storing oil in containers greater than 200ltr are affected by the regulations.
Any tank, container or drum must be bunded.
The bund must have a capacity of not less than 110% of the largest or 25% of their total aggregate storage capacity, whichever is the greater.
• The DRP10 Barrel Bund complies with these new regulations.
• Manufactured from heavy-duty 3.5mm steel.
• Removable galvanized steel grid platform.
• Bund can be accessed and moved from all four sides.Steel Barrel Bund
1340 x 800 x 335mm
Sealey Barrel Bund 1200 x 1200 x 275mm
Code: DRP11
Sealey Barrel Bund 1200 x 1200 x 275mmThe final stages of The Control of Pollution (Oil Storage) Regulations 2001, came into effect on 1st September 2005. Anyone storing oil in containers greater than 200ltr are affected by the regulations. Any tank, container or drum must be bunded. The bund must have a capacity of not less than 110% of the largest or 25% of their total aggregate storage capacity, whichever is the greater. All Sealey Barrel Bunds comply with these regulations.
Manufactured from heavy-duty 3.5mm steel. Removable galvanized steel grid platform. Bund can be accessed and moved from all four sides.• Capacity: 4 x 205ltr drums.
• Complies with the Control of Pollution Oil Storage Regulations 2001 which came into effect 1st March 2001.
** ADDITIONAL POINTS IF DETAILS OF REGS REQUIRED **
• These state that any container, tank or drum over 200ltr capacity (with exceptions) must be bunded.
• This bund must take at least 110% capacity of the oil storage container.
** END **
• Manufactured from heavy-duty 3.5mm steel.
• Removable galvanized steel grid platform.
• Bund can be accessed and moved from all four sides.
• Model No. DRP11ARE YOU COMPLIANT?
The final stages of The Control of Pollution (Oil Storage) Regulations 2001, came into effect on 1st September 2005.
Anyone storing oil in containers greater than 200ltr are affected by the regulations.
Any tank, container or drum must be bunded.
The bund must have a capacity of not less than 110% of the largest or 25% of their total aggregate storage capacity, whichever is the greater.
• The DRP11 Barrel Bund complies with these new regulations.
• Manufactured from heavy-duty 3.5mm steel.
• Removable galvanized steel grid platform.
• Bund can be accessed and moved from all four sides.Steel Barrel Bund
1200 x 1200 x 275mm
Manufactured from heavy-duty 3.5mm steel. Removable galvanized steel grid platform. Bund can be accessed and moved from all four sides.• Capacity: 4 x 205ltr drums.
• Complies with the Control of Pollution Oil Storage Regulations 2001 which came into effect 1st March 2001.
** ADDITIONAL POINTS IF DETAILS OF REGS REQUIRED **
• These state that any container, tank or drum over 200ltr capacity (with exceptions) must be bunded.
• This bund must take at least 110% capacity of the oil storage container.
** END **
• Manufactured from heavy-duty 3.5mm steel.
• Removable galvanized steel grid platform.
• Bund can be accessed and moved from all four sides.
• Model No. DRP11ARE YOU COMPLIANT?
The final stages of The Control of Pollution (Oil Storage) Regulations 2001, came into effect on 1st September 2005.
Anyone storing oil in containers greater than 200ltr are affected by the regulations.
Any tank, container or drum must be bunded.
The bund must have a capacity of not less than 110% of the largest or 25% of their total aggregate storage capacity, whichever is the greater.
• The DRP11 Barrel Bund complies with these new regulations.
• Manufactured from heavy-duty 3.5mm steel.
• Removable galvanized steel grid platform.
• Bund can be accessed and moved from all four sides.Steel Barrel Bund
1200 x 1200 x 275mm
Sealey Barrel Bund Polyethylene 1280 x 1280 x 275mm
Code: DRP13
Sealey Barrel Bund Polyethylene 1280 x 1280 x 275mmThe final stages of The Control of Pollution (Oil Storage) Regulations 2001, came into effect on 1st September 2005. Anyone storing oil in containers greater than 200ltr are affected by the regulations. Any tank, container or drum must be bunded. The bund must have a capacity of not less than 110% of the largest or 25% of their total aggregate storage capacity, whichever is the greater. All Sealey Barrel Bunds comply with these regulations. All Sealey Barrel Bunds comply with these regulations.
Manufactured from polyethylene, making the bunds ideal for storing aggressive chemicals. Corrosion resistant, will not rust or leak and are maintenance free. Lightweight for easy transportation and positioning, yet still strong and durable.• Suitable for storing 4 x 205ltr drums.
• Complies with The Control of Pollution Oil Storage Regulations 2001.
** ADDITIONAL POINTS IF DETAILS OF REGS REQUIRED **
• These state that any container, tank or drum over 200ltr capacity (with exceptions) must be bunded.
• This bund must take at least 110% capacity of the oil storage container.
** END **
• Manufactured from polyethylene making the bunds ideal for storing aggressive chemicals.
• Corrosion resistant, will not rust or leak and are maintenance free.
• Lightweight for easy transportation and positioning, yet still strong and durable.
• Model No. DRP13ARE YOU COMPLIANT?
The final stages of The Control of Pollution (Oil Storage) Regulations 2001, came into effect on 1st September 2005.
Anyone storing oil in containers greater than 200ltr are affected by the regulations.
Any tank, container or drum must be bunded.
The bund must have a capacity of not less than 110% of the largest or 25% of their total aggregate storage capacity, whichever is the greater.
• The DRP13 Barrel Bund complies with these new regulations.
• Manufactured from polyethylene, making the bunds ideal for storing aggressive chemicals.
• Corrosion resistant, will not rust or leak and are maintenance free.
• Lightweight for easy transportation and positioning, yet still strong and durable.Polyethylene Barrel Bund 1280 x 1280 x 275mm
Manufactured from polyethylene, making the bunds ideal for storing aggressive chemicals. Corrosion resistant, will not rust or leak and are maintenance free. Lightweight for easy transportation and positioning, yet still strong and durable.• Suitable for storing 4 x 205ltr drums.
• Complies with The Control of Pollution Oil Storage Regulations 2001.
** ADDITIONAL POINTS IF DETAILS OF REGS REQUIRED **
• These state that any container, tank or drum over 200ltr capacity (with exceptions) must be bunded.
• This bund must take at least 110% capacity of the oil storage container.
** END **
• Manufactured from polyethylene making the bunds ideal for storing aggressive chemicals.
• Corrosion resistant, will not rust or leak and are maintenance free.
• Lightweight for easy transportation and positioning, yet still strong and durable.
• Model No. DRP13ARE YOU COMPLIANT?
The final stages of The Control of Pollution (Oil Storage) Regulations 2001, came into effect on 1st September 2005.
Anyone storing oil in containers greater than 200ltr are affected by the regulations.
Any tank, container or drum must be bunded.
The bund must have a capacity of not less than 110% of the largest or 25% of their total aggregate storage capacity, whichever is the greater.
• The DRP13 Barrel Bund complies with these new regulations.
• Manufactured from polyethylene, making the bunds ideal for storing aggressive chemicals.
• Corrosion resistant, will not rust or leak and are maintenance free.
• Lightweight for easy transportation and positioning, yet still strong and durable.Polyethylene Barrel Bund 1280 x 1280 x 275mm