Steering Track Rods
Refine by Car Type
Filter by brand
Bump steer correcting tie rod kit. Porsche 964 Turbo
Code: 2180033
Bump steer correcting tie rod kit.
1 kit, req'd per car.
For Porsche 964 1989-94 Turbo Wide-Body Only
Bump Geometry Correction
Lowered cars with non-RS wheel carriers suffer from bump steer and will benefit from bump geometry correction.
Bump steer is a change in toe due to vertical movement of the wheel, such as when driving over a bump. The toe change causes the car to turn, and the driver needs to constantly correct for this to maintain a steady trajectory. This makes the car a handful to drive, especially over bumpy road surfaces.
Bump correction is achieved by moving the tie rod end pivot about 10mm closer to the steering knuckle as compared to the stock tie rod end. This changes the angle of the tie rod to produce the bump geometry correction.
No Need To Convert Wheel Carriers
This Bump Steer Correcting Tie Rod kit provides bump geometry correction with the standard C2/C4 wheel carriers. It is not necessary to convert the wheel carriers to RS type to correct for bump steer when using our kit.
• Corrects for bump steer
• Eliminates rubber inner-joint
• Enhanced driving precision
• Easier and more cost effective than RS wheel carrier conversion
These Elephant Racing bump steer tie rods also eliminate the compliant rubber inner-joint found in the factory 964 tie rods with a spherical bearing providing a more direct and responsive steering feel. Thus, proper suspension geometry is restored, driver corrections are minimized, and vehicle trajectory is stabilized making driving control easier while reducing driver fatigue.
Out Performs All Other Tie Rods
Even on cars fresh from the Porsche factory assembly lines our anti-bump steer kit will reduce bump steer through the full range of motion.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180033
The product you are viewing cross references to these numbers
1 kit, req'd per car.
For Porsche 964 1989-94 Turbo Wide-Body Only
Bump Geometry Correction
Lowered cars with non-RS wheel carriers suffer from bump steer and will benefit from bump geometry correction.
Bump steer is a change in toe due to vertical movement of the wheel, such as when driving over a bump. The toe change causes the car to turn, and the driver needs to constantly correct for this to maintain a steady trajectory. This makes the car a handful to drive, especially over bumpy road surfaces.
Bump correction is achieved by moving the tie rod end pivot about 10mm closer to the steering knuckle as compared to the stock tie rod end. This changes the angle of the tie rod to produce the bump geometry correction.
No Need To Convert Wheel Carriers
This Bump Steer Correcting Tie Rod kit provides bump geometry correction with the standard C2/C4 wheel carriers. It is not necessary to convert the wheel carriers to RS type to correct for bump steer when using our kit.
• Corrects for bump steer
• Eliminates rubber inner-joint
• Enhanced driving precision
• Easier and more cost effective than RS wheel carrier conversion
These Elephant Racing bump steer tie rods also eliminate the compliant rubber inner-joint found in the factory 964 tie rods with a spherical bearing providing a more direct and responsive steering feel. Thus, proper suspension geometry is restored, driver corrections are minimized, and vehicle trajectory is stabilized making driving control easier while reducing driver fatigue.
Out Performs All Other Tie Rods
Even on cars fresh from the Porsche factory assembly lines our anti-bump steer kit will reduce bump steer through the full range of motion.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180033
2180033
96534703200
96434703203
96534703201
96434703201
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
£660.00
Now £646.80
In stock 
Bump steer correcting tie rod kit. Porsche 964 W/O RS Wheel Carriers
Code: 2180031
Bump steer correcting tie rod kit.
Bump geometry correction. 1 kit, req'd per car.
For Porsche 964 1989-94 W/O RS Wheel Carriers
Lowered cars with non-RS wheel carriers suffer from bump steer and will benefit from bump geometry correction.
Bump steer is a change in toe due to vertical movement of the wheel, such as when driving over a bump. The toe change causes the car to turn, and the driver needs to constantly correct for this to maintain a steady trajectory. This makes the car a handful to drive, especially over bumpy road surfaces.
Bump correction is achieved by moving the tie rod end pivot about 10mm closer to the steering knuckle as compared to the stock tie rod end. This changes the angle of the tie rod to produce the bump geometry correction.
No Need To Convert Wheel Carriers
This Bump Steer Correcting Tie Rod kit provides bump geometry correction with the standard C2/C4 wheel carriers. It is not necessary to convert the wheel carriers to RS type to correct for bump steer when using our kit.
These Elephant Racing bump steer tie rods also eliminate the compliant rubber inner-joint found in the factory 964 tie rods with a spherical bearing providing a more direct and responsive steering feel. Thus, proper suspension geometry is restored, driver corrections are minimized, and vehicle trajectory is stabilized making driving control easier while reducing driver fatigue.
Out Performs All Other Tie Rods
Even on cars fresh from the Porsche factory assembly lines our anti-bump steer kit will reduce bump steer through the full range of motion.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180031
The product you are viewing cross references to these numbers
Bump geometry correction. 1 kit, req'd per car.
For Porsche 964 1989-94 W/O RS Wheel Carriers
Lowered cars with non-RS wheel carriers suffer from bump steer and will benefit from bump geometry correction.
Bump steer is a change in toe due to vertical movement of the wheel, such as when driving over a bump. The toe change causes the car to turn, and the driver needs to constantly correct for this to maintain a steady trajectory. This makes the car a handful to drive, especially over bumpy road surfaces.
Bump correction is achieved by moving the tie rod end pivot about 10mm closer to the steering knuckle as compared to the stock tie rod end. This changes the angle of the tie rod to produce the bump geometry correction.
No Need To Convert Wheel Carriers
This Bump Steer Correcting Tie Rod kit provides bump geometry correction with the standard C2/C4 wheel carriers. It is not necessary to convert the wheel carriers to RS type to correct for bump steer when using our kit.
- Corrects for bump steer
- Eliminates rubber inner-joint
- Enhanced driving precision
- Easier and more cost effective than RS wheel carrier conversion
These Elephant Racing bump steer tie rods also eliminate the compliant rubber inner-joint found in the factory 964 tie rods with a spherical bearing providing a more direct and responsive steering feel. Thus, proper suspension geometry is restored, driver corrections are minimized, and vehicle trajectory is stabilized making driving control easier while reducing driver fatigue.
Out Performs All Other Tie Rods
Even on cars fresh from the Porsche factory assembly lines our anti-bump steer kit will reduce bump steer through the full range of motion.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180031
2180031
96434703200
96434703202
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
£651.00
Now £637.98
Arriving soon
Outer tie rod set RSR style. Porsche 964 (965) Turbo BBi Autosport
Code: BBI96540100
BBi Porsche RSR style outer tie rod.
Set of 2
Enhance the handling of your Porsche's steering system with our BBI Porsche 964 993 RSR Type Outer Tie Rod. These outer tie rods feature a Teflon-lined spherical joint that offers improved feedback compared to OE parts. Not only that but they are specifically designed to assist in adjusting bump steer, making them an essential upgrade for both canyon carving and track enthusiasts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BBI96540100
The product you are viewing cross references to these numbers
Set of 2
Enhance the handling of your Porsche's steering system with our BBI Porsche 964 993 RSR Type Outer Tie Rod. These outer tie rods feature a Teflon-lined spherical joint that offers improved feedback compared to OE parts. Not only that but they are specifically designed to assist in adjusting bump steer, making them an essential upgrade for both canyon carving and track enthusiasts.
Fits:
Porsche 965 (964) Turbo
One piece outer tie rods with a Teflon lined spherical provide better feedback and longevity over OE parts. Designed to also aid in adjustment of bump steer these are a must-have for track enthusiasts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BBI96540100
96534703200
96534703201
9653470320
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Prices from: £693.55
Outer tie rod set RSR style. Porsche 964 BBi Autosport
Code: BBI96440100
BBi Porsche RSR style outer tie rod.
Set of 2
Enhance the handling of your Porsche's steering system with our BBI Porsche 964 993 RSR Type Outer Tie Rod. These outer tie rods feature a Teflon-lined spherical joint that offers improved feedback compared to OE parts. Not only that but they are specifically designed to assist in adjusting bump steer, making them an essential upgrade for both canyon carving and track enthusiasts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BBI96440100
The product you are viewing cross references to these numbers
Set of 2
Enhance the handling of your Porsche's steering system with our BBI Porsche 964 993 RSR Type Outer Tie Rod. These outer tie rods feature a Teflon-lined spherical joint that offers improved feedback compared to OE parts. Not only that but they are specifically designed to assist in adjusting bump steer, making them an essential upgrade for both canyon carving and track enthusiasts.
Fits:
Porsche 964
One piece outer tie rods with a Teflon lined spherical provide better feedback and longevity over OE parts. Designed to also aid in adjustment of bump steer these are a must-have for track enthusiasts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BBI96440100
96434705800
96434705804
96434703200
96434703201
9643470320
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
Prices from: £693.55
RSR style inner tie rod. Porsche 964 / 993 1989-97 BBi Porsche
Code: 99334703105/3
BBi Porsche RSR style inner tie rod.
Set of 2
Fits:
Porsche 964 1989-1994
Porsche 993 1994-97
These tie rods provide more consistent and firmer feedback without increase of NVH (noise, vibration and harshness)
These are a required upgrade for 964 owners looking to run our billet uprights
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99334703105
The product you are viewing cross references to these numbers
Set of 2
Fits:
Porsche 964 1989-1994
Porsche 993 1994-97
These tie rods provide more consistent and firmer feedback without increase of NVH (noise, vibration and harshness)
These are a required upgrade for 964 owners looking to run our billet uprights
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99334703105
99334713101
99334703105
96434705800
96434705804
99334703102
99334703103
99334703104
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£406.16
Now £398.04
Arriving soon
Rubber boots for use with spherical end links
Code: S-222-BOOT
Rennline Rubber boots for use with spherical end links.
For use with adjustable control arms
Full encapsulating weather/dust seals are an option with this kit to provide extra protection against the dirty driving conditions both under the car and behind the front wheels. These will work with all Rennline control arms and bump steer kits.
Sold in Pairs
Fits Rod end sizes Male: 1/2", 5/8", 3/4", 14mm, 16mm, 18mm
Female: 1/2", 5/8", 3/4", 14mm, 16mm, 18mm
For use with adjustable control arms
Full encapsulating weather/dust seals are an option with this kit to provide extra protection against the dirty driving conditions both under the car and behind the front wheels. These will work with all Rennline control arms and bump steer kits.
Sold in Pairs
Fits Rod end sizes Male: 1/2", 5/8", 3/4", 14mm, 16mm, 18mm
Female: 1/2", 5/8", 3/4", 14mm, 16mm, 18mm
£20.00
Now £19.60
Orderable
Steering rack mount reinforcement. Porsche 964 / 993
Code: 3602101601
Steering Rack Mount Reinforcement. It includes the billet anodized aluminum strut and 2 new mounting bolts.
Fits:
Porsche 964
Porsche 993
Fits all RHD or LHD cars
This kit was originally designed by Porsche and fitted to the 993's that came with the optional 18" wheels.
It is a recommended upgrade for any '92-'98 964/993 car regardless of tire size.
Please Note: The steering racks on 89-91 964 are different then later 964 and 993 cars. The hydraulic lines slightly interfere with the placement of the brace so the lines need to be gently pushed/ bent and the brace needs mount with the flush side down to accommodate.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3602101601
The product you are viewing cross references to these numbers
Fits:
Porsche 964
Porsche 993
Fits all RHD or LHD cars
This kit was originally designed by Porsche and fitted to the 993's that came with the optional 18" wheels.
It is a recommended upgrade for any '92-'98 964/993 car regardless of tire size.
Please Note: The steering racks on 89-91 964 are different then later 964 and 993 cars. The hydraulic lines slightly interfere with the placement of the brace so the lines need to be gently pushed/ bent and the brace needs mount with the flush side down to accommodate.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3602101601
96434110105
96434700902
964347009
96434700904
96434701204
96434701205
96434701102
99334110105
99334701100
993347011
99334701201
99334701203
99334701204
996347012
3602101601
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£99.00
Now £97.02
In stock
DISPLAYING 1 to 7 (of 7 products)
Also found on these pages
About Steering Track Rods
Enhance Your Porsche Steering with Performance Steering Track Rod Arms: Technical Specifications and Benefits
Technical specifications of Performance Steering Track Rod Arms:
- Performance steering track rod arms, also known as tie rod arms, are crucial components in the steering system of a Porsche.
- They connect the steering rack to the steering knuckle or wheel hub, transmitting steering inputs and allowing for precise control of the vehicle.
- Performance track rod arms are specifically designed to improve steering response, stability, and overall handling characteristics.
- They are made from high-quality materials such as forged aluminum alloy or hardened steel for increased strength and durability.
- Performance steering track rod arms are available as aftermarket upgrades or standard replacements for Porsche models.
Benefits of upgrading or replacing Performance Steering Track Rod Arms for your Porsche:
Enhanced steering precision: Performance track rod arms offer improved rigidity and stiffness, resulting in more precise steering response and feedback.
Reduced play and improved stability: Upgrading to performance arms helps reduce steering play, ensuring a more direct and accurate connection between the steering rack and the wheels, resulting in increased stability and control.
Improved cornering ability: Performance track rod arms provide better control during cornering, minimizing understeer or oversteer tendencies and enhancing overall handling performance.
Increased durability: Performance arms are designed to withstand higher loads and provide increased durability compared to standard arms, ensuring long-lasting performance even under demanding driving conditions.
Optimal alignment adjustments: Performance track rod arms often offer adjustable features, allowing for precise alignment adjustments, which can optimize tire wear, enhance traction, and improve cornering stability.
At Design911, we specialize in providing the correct parts and professional advice for your Porsche. We offer a wide range of performance steering track rod arms specifically designed for Porsche models, including both aftermarket upgrades and OEM replacements. Our experienced team can assist you in selecting the appropriate track rod arms based on your Porsche model, year, and specific steering system requirements. We understand the importance of achieving optimal steering performance and handling characteristics, and we can guide you in choosing the best arms that suit your needs. With our expertise and commitment to customer satisfaction, we can help you enhance your Porsche's steering precision, stability, and overall driving experience. Contact us today to benefit from our comprehensive support and access high-quality parts tailored to your requirements.
You may also like
-
Strut Brace
-
Anti Roll Sway Bar
-
Lowering Springs
-
Control Arms Front
-
Control Arms Rear
-
Drop links Front
-
Drop links Rear
-
Engine mounts
-
Gearbox mounts
-
Top mounts Front
-
Top mounts Rear
-
Spring plates
-
Front Sub frame
-
Rear Sub Frame
-
Air Lift System
-
Roll Cages
-
Bilstein SPORT B6 Dampers
-
Bilstein B14 PSS Coilover Suspension Kits
-
Bilstein B16 PSS9/10 Height Damping Adjustable Coilover Kit
-
Bilstein B16 DampTronic (PASM)
-
Bilstein EVO SE
-
Ohlins Road & Track Suspension
-
Koni Sports
-
Koni Special Active
-
Superpro Polyurethane Bushes
-
Powerflex Polyurethane Bushes
-
Powerflex Black Series Bushes
-
Powerflex Heritage Collection
-
DesignTek D220 Coilover Suspension Kit
-
H&R Adjustable Suspension Kits
-
H&R Cup-Kit Sport Suspension
-
KW Variant 1 Inox Suspension kits
-
KW Variant 2 Inox Adjustable Rebound Damping Suspension
-
KW Variant 3 Adjustable Suspension kits
-
KW Clubsport Coilover Suspension Kits
-
KW Clubsport Coilover Suspension Kits WITH Top Mounts
-
Sachs Performance Suspension CSS
Popular Models
