Porsche > 964 (911) (1989-1994) > Suspension Upgrades >

Top mounts Front

Refine by Car Type

Bushing kit for camber plate and monoball. Porsche 964 / 993

Code: SB74

Bushing kit for camber plate and monoball.

For use with Rennline 964/993 Camber Plates and Monoball Strut Mounts

Bushing Kits for use with Rennline 964/993 Camber Plates and Monoball Strut Mounts. Kit is available in m12 or m14 sizes and includes 2 flat spacer bushings and 4 stepped bushings. These are replacement bushings which are only needed when swapping to struts with a different shaft diameter (These are included with the 964/993 front and rear upper monoball/camber plates).

Zoom in (3) Zoom in (3) Zoom in (3)

Front Adjustable Camber Plate Top Mount Set - Sealed for Porsche 993/964

Code: 3602509641

Front Adjustable Camber Plate Top Mount Set - Sealed for Porsche 993/964

SET OF 2.

rohler

Fits:
Porsche 964 / 993*

* For cars with factory Boge shocks please call for fitment details.

** For 993's with factory strut mounts, longer strut mount bolts (m8x25mm) are required. Fits Bilstein PSS9/10 Kits, KW suspension and Ohlins suspension by drilling the centre bearing a little larger.

Camber Plates/Strut Mounts - Under extreme conditions, such as road racing and autocross, negative camber is required to keep as much of the tire’s contact patch on the road as possible. Stock suspension mounts will not allow you to achieve the necessary amount of negative camber required for this type of performance driving. Sealed camber plates incorporate motorsports Teflon-lined spherical bearings and eliminate the indistinct feedback associated with factory rubber mounts.

- Drastically increased bearing life due to the integrated factory GT3 weather seals.
- Motorsports Teflon-lined spherical bearings.
- Rigid bearing mount, not clipped in like some products available.
- Can be used with all factory and aftermarket struts, Including factory non adjustable units.
- Longer stud lengths to allow for easy installation of strut bar.
- Fully rebuild-able
- CNC machined 6061 anodized aluminium construction with stainless steel hardware.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3602509641

99334301800

The product you are viewing cross references to these numbers

Zoom in (3) Zoom in (3) Zoom in (3)

QuickChange™ front camber plate kit. Porsche Porsche 964/993

Code: 2152202

QuickChange™ front camber plate kit.
Sold per kit, 1 kit req'd per car.

elephantracing

Extend the range of camber adjustment and dial in your desired settings with ease.

These plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates. The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication. Included seals prevent contamination from water or grime, thus extending bearing life.

Fits:
Porsche 964 1990-94 / 993 1995-98 Front camber plate 14mm spacers

Fully Weather Sealed:
We've designed in weather seals on the top and bottom to keep dirt out and extend product life. This is the only camber plate suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.

This camber plate is intended to be used with a non-factory upper spring perch and spring. This kit is suited to work perfectly with Von Coilover systems or other similar solutions.

Please note: please contact us if you wish to use this camber plate kit in conjunction with factory or lowering springs.

Ease of Camber Adjustment
Indices on the camber plate allow measured changes without setup tools.

Extended Caster
These plates deliver the same caster as the 993 for enhance camber gain when turning.

Improved Shock / Coilover Performance
Spherical bearings further improve performance. The spherical bearings pivot freely and eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons;

– The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.

– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2152202

2152202

96434301802

96434301803

96434301882

99334301800

The product you are viewing cross references to these numbers

Zoom in (5) Zoom in (5) Zoom in (5) Zoom in (5) Zoom in (5)

Rennline Front Adjustable Camber Plate Top Mount Set - Sealed for Porsche 993/964

Code: SB676974

Rennline Front Adjustable Camber Plate Top Mount Set - Sealed. SET OF 2.

Fits:
Porsche 964 / 993*

* For cars with factory Boge shocks please call for fitment details.

** For 993's with factory strut mounts, longer strut mount bolts (m8x25mm) are required.

** For cars with KW CLUBSPORT struts, select the KW drop drown as it includes alternate hardware required for installation.

Camber Plates/Strut Mounts - Under extreme conditions, such as road racing and autocross, negative camber is required to keep as much of the tire’s contact patch on the road as possible. Stock suspension mounts will not allow you to achieve the necessary amount of negative camber required for this type of performance driving. Rennline’s Sealed camber plates incorporate FK motorsports Teflon-lined spherical bearings and eliminate the indistinct feedback associated with factory rubber mounts. Why are Rennline’s strut mounts the best ?

• Drastically increased bearing life due to the integrated factory GT3 weather seals.
• FK Motorsports Teflon-lined spherical bearings.
• Rigid bearing mount, not clipped in like some products available.
• Can be used with all factory and aftermarket struts, Including factory non adjustable units. Call for details.
• Longer stud lengths to allow for easy installation of strut bar.
• Fully rebuildable
• CNC machined 6061 anodized aluminum construction with stainless steel hardware.
• Available for front and rear

*Strut brace not included but is available separately.

For fitting information about this product Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SB676974

99334301800

The product you are viewing cross references to these numbers

DISPLAYING 1 to 4 (of 4 products)

Also found on these pages

402-00

About Top mounts Front

Enhance Your Porsche Suspension with Performance Top Mounts: Technical Specifications and Benefits

Technical specifications of Performance Suspension Top Mounts:

Performance suspension top mounts, also known as strut mounts or bearing plates, are components that connect the suspension struts to the chassis of a Porsche.
They are typically made from high-quality materials such as aluminum alloy or reinforced rubber.
Performance top mounts feature a stiffer construction and improved design compared to standard mounts, providing enhanced performance and durability.
They come in various designs and options to fit different Porsche models and suspension setups.
Performance suspension top mounts are available as aftermarket upgrades or standard replacements for Porsche vehicles.

Benefits of upgrading or replacing Performance Suspension Top Mounts for your Porsche:

Improved handling and stability: Performance top mounts offer increased rigidity and precision, enhancing the vehicle's handling characteristics and overall stability during cornering and high-speed maneuvers.

Enhanced suspension feedback: Upgrading to performance mounts improves suspension feedback, allowing the driver to better sense and respond to road conditions, resulting in a more engaging driving experience.

Reduced noise, vibration, and harshness (NVH): Stiffer top mounts help minimize unwanted vibrations and noise transmitted to the chassis, leading to a smoother and more comfortable ride.

Enhanced suspension geometry: Performance top mounts allow for precise alignment adjustments, optimizing suspension geometry for improved tire wear, traction, and cornering performance.

Increased durability: Performance top mounts are designed to withstand higher loads and provide increased durability compared to standard mounts, ensuring longevity even under demanding driving conditions.

At Design911, we specialize in providing the correct parts and professional advice for your Porsche. We offer a wide range of performance suspension top mounts specifically designed for Porsche models, including both aftermarket upgrades and OEM replacements. Our knowledgeable team can assist you in selecting the appropriate top mounts based on your Porsche model, year, and specific suspension requirements. We understand the importance of finding the right balance between performance and comfort, and we can guide you in choosing the optimal top mounts that suit your needs. With our expertise and commitment to customer satisfaction, we can help you enhance your Porsche's suspension performance, handling, and overall driving experience. Contact us today to benefit from our comprehensive support and access high-quality parts tailored to your requirements.

Enter your VAT number here and click Verify:

Top mounts Front

Top mounts Front