Bilstein B16 DampTronic (PASM)

CARGRAPHIC AirLift Evolution Upgrade Kit



The CARGRAPHIC AirLift Evolution is available as an upgrade kit to be mounted on an existing factory front coilover suspension.  Fits cars with PASM or without 

It is important to note that the CARGRAPHIC AirLift Evolution can only be fitted to coilovers with cylindrical suspension springs. Alternatively, the kit can be fitted to Bilstein, Ohlins and KW coilover suspension kits, which are available to purchase from Design911

Please note when ordering we will need your full vehicle details, together with which type of coilover kit is being used with the kit 

Consisting of:
• 2x CARGRAPHIC AirLift Air spring / Air bellows
• 1x CARGRAPHIC AirLift Control unit V9
• 1x Wiring loom
• 1x Air duct set with connections
• 1x Remote control
• Fitting material
• Installation manual
• TÜV-Certificate*
• For vehicles with coilover suspension with cylindrical suspension springs

Features:

• Raising of the body by 55mm, measured at the fender
• Fast response time: maximum increase within 15 seconds
• No change or impairment of driving behaviour
• Safe control with automatic lowering from 50km/h
• Pneumatic operation, thus no liquid in the vehicle
• No reduction of the luggage compartment volume
• Low weight of approx. 3Kg
• Short installation time of approx. 3 hours.
• Operation via radio or permanently installed switch
• German TUEV certificate*
• Tested by world champion Walter Röhrl
• Fitting:  A qualified, experienced technician will need to fit this kit needs with due skill, care and diligence.

BILSTEIN 11-223900 - Bilstein Sway Bar Adapter Kits



Bilstein sway bar adapter kits are engineered to be used in conjunction with Bilstein coilover kits. They make it possible to properly install a set of Bilstein ride height adjustable coilovers and retain the full functionality of your factory active sway bar system. These kits include all required components and instructions for easy installation. You don't have to choose between ride height adjustment and active sway bar capabilities with Bilstein sway bar adapter kits. Order the set designed to fit your specific model.

Fits:
Porsche 911 (991) 3.4L Carrera / 3.8L Carrera S / Turbo 12/2011>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

11-223900

The product you are viewing cross references to these numbers

BILSTEIN B16 DampTronic Coilover Suspension Kits



Fits:
Porsche 991.1 all models 

Porsche 991.2 all models 

Additional Notes:
- with PASM; with electronic suspension control;
- with active stabilizer;
- mark: I031; I352;
- Only in connection with 1x 11-223900

- Lowers Front: 20mm-40mm; axle load to: 775 kg
- Lowers Rear: 20mm-40mm; axle load to: 1180 kg

Not only engine performance but, above all, suspension technology contributes to the fascination of a Porsche sports car. Bilstein offers an exclusive range of active coil over systems in mono-tube/inverted technology suspension systems for individualisation of the current Porsche models with PASM: Porsche 911 (C2, C4,Turbo and GT3), Porsche Boxster and Porsche Cayman. The coil over system is electronically adjustable. So PASM-function and car sensors like PSM stays fully in function. In addition the height-adjustment offers a certified range of lowering.

Discreet sporty looks and precisely defined response within both setup modes, accompanied by high driving dynamics and excellent residual ride comfort. Regardless of whether in daily motoring, on the Nordschleife of the Nürburgring at the weekend, in training courses or in club sports - it's all pure driving enjoyment!

Product advantages at a glance:

- BILSTEIN mono-tube/inverted technology
- PASM-function and car sensors remain fully active
- BILSTEIN road tested and tuned
- High driving dynamics with good ride comfort
- Discreet sporty appearance
- Threaded chassis certified range of adjustment
- German TüV certificate

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

49-216042

The product you are viewing cross references to these numbers

Bilstein B16 DampTronic Coilover Suspension Kits.



Fits:
Porsche 991.1 all models 

Porsche 991.2 all models 

Additional Notes:
- Cars with Porsche lift system on the front axle and PASM (Porsche Active Suspension Management)
- Lowers Front: 30mm; axle load to: 825 kg
- Lowers Rear: 25mm-40mm; axle load to: 1260 kg

Not only engine performance but, above all, suspension technology contributes to the fascination of a Porsche sports car. Bilstein offers an exclusive range of active coil over systems in mono-tube/inverted technology suspension systems for individualisation of the current Porsche models with PASM: Porsche 911 (C2, C4,Turbo and GT3), Porsche Boxster and Porsche Cayman. The coil over system is electronically adjustable. So PASM-function and car sensors like PSM stays fully in function. In addition the height-adjustment offers a certified range of lowering.

Discreet sporty looks and precisely defined response within both setup modes, accompanied by high driving dynamics and excellent residual ride comfort. Regardless of whether in daily motoring, on the Nordschleife of the Nürburgring at the weekend, in training courses or in club sports - it's all pure driving enjoyment!

Product advantages at a glance:

- BILSTEIN mono-tube/inverted technology
- PASM-function and car sensors remain fully active
- BILSTEIN road tested and tuned
- High driving dynamics with good ride comfort
- Discreet sporty appearance
- Threaded chassis certified range of adjustment
- German TüV certificate

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

49-279047

The product you are viewing cross references to these numbers