Ohlins Road & Track Suspension

Adjustable suspension kit (springs included).



Fits the following vehicles:
911 (991) Carrera 4/S, Turbo (all models)

General Features:
• DFV technology (Dual Flow Valve)
• Height adjustable
• Rebuildable
• Corrosion salt spray tested (ISO 9227)
• 2 year limited warranty

Features Front:
• McPherson strut, upside down
• Compression and rebound damping with one adjuster
• Spring preload adjuster
• Approx. 10 mm lower than standard with recommended setup
• Spring rate 70 N/mm
• Dustcovers
• Use with original top mounts

Features Rear:
• Conventional Shock Absorber
• Compression and rebound damping with one adjuster
• Spring preload adjuster
• Approx. 10 mm lower than standard with recommended setup
• Spring rate 140 N/mm
• Dustcovers
• Use with original top mounts


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

POSMU00

The product you are viewing cross references to these numbers

Adjustable Suspension kits .



Fits the following vehicles:
Porsche 911 (991) Carrera 2S /Carrera 2

The coil over set will be delivered without springs.
Coil springs need to be ordered separately.

The Öhlins Road & Track range for Porsche covers a major part of 991 Carrera / Carrera S models with kits for all needs. It's a kit designed for track day use and club racing but with the DFV technology it also offers superb handling and comfort on the way to and from the tracks.

The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.

These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.

This kit is especially developed for high end racing and also TÜV approved.

Technical Info:
• DFV (Dual Flow Valve)
• Rebuildable
• Corrosion salt spray tested (ISO 9227)
• 2 year Limited Warranty
• Height adjustable
• prings ordered seperately

Front Shocks:
• McPherson Strut
• Single bleed adjuster
• Spring preload adjuster (approx. 8 mm lower than standard)
• Coil Springs
• Dustcovers
• Use with original top mounts

Rear Shocks:
• Conventional Shock Absorber
• Single bleed adjuster
• Spring preload adjuster (approx. 10 mm lower than standard)
• Coil Springs
• Dustcovers
• Use with original top mounts

Notes:
The recommended springs for this set are:
- front: spring rate 70 N/mm, article no. 48010-19
- rear: spring rate 120 N/mm, article no. 48010-39

For the POS MP70 a PASM cancellation kit with the article no. 35020-07 is available. The cancellation kit is just plugged into the original suspension controls and deactivates control lamps and error reports when electronically adjustable EOM suspension is replaced by a mechanical system. No further programming is needed.

Adjustable suspension kit. Advanced Trackday. Porsche 991 GT3 (2013-) 120/200 N/mm



Fits:
Porsche 911 (991) GT3 RS, year 2015>>

General Features:
• TTX technology
• 2-way adjustable
• Height adjustable
• Rebuildable
• Corrosion salt spray tested (ISO 9227)
• 2 year limited warranty

Front:
• McPherson strut, upside down
• Twin tube technology
• Separate compression and rebound adjusters
• Spring preload adjuster
• Approx. 20 mm lower than standard with recommended setup
• Spring rate main spring 120 N/mm
• Spring rate helper spring 20 N/mm
• Dustcovers
• Use with original top mounts

Rear:
• Conventional Shock Absorber
• Twin Tube technology
• Separate compression and rebound adjusters
• Spring preload adjuster
• Approx. 20 mm lower than standard with recommended setup
• Spring rate main spring 200 N/mm
• Spring rate helper spring 20 N/mm
• Dustcovers
• Use with original top mounts

Notes: The set consists of 2 dampers POF 5R00 for the front and 2 dampers POF 6R00 for the rear. 

Adjustable Suspension kits.



Fits the following vehicles:
Porsche 911 (991) Carrera/Carrera S, year 2011 –

The Öhlins Road & Track range for Porsche covers a major part of 991 Carrera / Carrera S models with kits for all needs. It's a kit designed for track day use and club racing but with the DFV technology it also offers superb handling and comfort on the way to and from the tracks.

The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.

These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.

This kit is especially developed for high end racing and also TÜV approved.

General Features:
● DFV technology (Dual Flow Valve)
● Height adjustable
● Rebuildable
● Corrosion salt spray tested (ISO 9227)
● 2 year limited warranty

Front:
● McPherson strut, upside down
● Compression and rebound damping with one adjuster
● Spring preload adjuster
● Approx. 10 mm lower than standard with recommended setup
● Height adjustment range -15/+15 mm
● Spring rate 70 N/mm
● Dustcovers
● Use with original top mounts

Rear:
● Conventional Shock Absorber
● Compression and rebound damping with one adjuster
● Spring preload adjuster
● Approx. 10 mm lower than standard with recommended setup
● Height adjustment range -15/+15 mm
● Spring rate 120 N/mm
● Dustcovers
● Use with original top mounts

Adjustable suspension set. Porsche 911 GT3 RS (991) incl. 120/200 N/mm springs (motorsport kit)



Fits:
Porsche 911 (991) GT3 / 911 (991) GT3 RS 2013>>

General Features:
TTX technology
2-way adjustable
Height adjustable
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year limited warranty

Front:
McPherson strut, upside down
Twin tube technology
Separate compression and rebound adjusters
Spring preload adjuster
Approx. 20 mm lower than standard with recommended setup
Spring rate main spring 120 N/mm
Spring rate helper spring 20 N/mm
Dustcovers
Use with original top mounts

Rear:
Conventional Shock Absorber
Twin Tube technology
Separate compression and rebound adjusters
Spring preload adjuster
Approx. 20 mm lower than standard with recommended setup
Spring rate main spring 200 N/mm
Spring rate helper spring 20 N/mm
Dustcovers
Use with original top mounts

CARGRAPHIC AirLift Evolution Upgrade Kit



The CARGRAPHIC AirLift Evolution is available as an upgrade kit to be mounted on an existing factory front coilover suspension.  Fits cars with PASM or without 

It is important to note that the CARGRAPHIC AirLift Evolution can only be fitted to coilovers with cylindrical suspension springs. Alternatively, the kit can be fitted to Bilstein, Ohlins and KW coilover suspension kits, which are available to purchase from Design911

Please note when ordering we will need your full vehicle details, together with which type of coilover kit is being used with the kit 

Consisting of:
• 2x CARGRAPHIC AirLift Air spring / Air bellows
• 1x CARGRAPHIC AirLift Control unit V9
• 1x Wiring loom
• 1x Air duct set with connections
• 1x Remote control
• Fitting material
• Installation manual
• TÜV-Certificate*
• For vehicles with coilover suspension with cylindrical suspension springs

Features:

• Raising of the body by 55mm, measured at the fender
• Fast response time: maximum increase within 15 seconds
• No change or impairment of driving behaviour
• Safe control with automatic lowering from 50km/h
• Pneumatic operation, thus no liquid in the vehicle
• No reduction of the luggage compartment volume
• Low weight of approx. 3Kg
• Short installation time of approx. 3 hours.
• Operation via radio or permanently installed switch
• German TUEV certificate*
• Tested by world champion Walter Röhrl
• Fitting:  A qualified, experienced technician will need to fit this kit needs with due skill, care and diligence.