Retro Performance

This is a brand Hasting 96mm Type 4/914 2.0L Piston Ring Set.



Fits:Porsche 914 1.7 / 1.8L Big Bore
Ring size:1/16 x 1/16 x 3/16
Number of CYL's: 4

This is a replacement ring Set for Retro Performance (VW9600T4S71) and (VW9600T4S71P) Kits.

This is a brand new set of 4 Grant rings.



Fits: Porsche 914 2.0L
Ring size: 1/16 x 1/16 x 3/16
Number of CYL's: 4

This is a replacement ring Set for the 103x71mm Retro Performance pistons.

This is a brand new set of 4 Grant 96mm rings.



Fits:Porsche 914 1.7 / 1.8L Big Bore
Ring size: 1/16 x 1/16 x 3/16
Number of CYL's: 4

This is a replacement ring Set for Retro Performance (VW9600T4S66) and (VW9600T4S66P) Kits.

This is a brand new set of 4 Grant rings.



Fits:Porsche 914 2.0L
Number of CYL's: 4

This is a brand new set of 4 Grant 93mm rings.



Fits:Porsche 914 1.8L
Ring size: 2.0 x 2.0 x 5.0
Number of CYL's: 4

This is a brand new set of 4 Grant 90mm rings.



Fits:Porsche 914 1.7L
Ring size: 2.0 x 2.0 x 5.0.
Number of CYL's: 4

This is a new set of 6 JE Pistons.



JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets.

Fits: Porsche 911S 2.2L / 2.4L

Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Pistons: JE 2618 Forged

Kit includes: 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.

OPTIONS:
1. 84mm - High compression
The Compression ratios are 10.1:1 with the 66mm crank and 10.6:1 with the 70.4mm.
2. 86mm - Low compression
The Compression ratios are 9.2:1 with the 66mm crank and 9.5:1 with the 70.4mm.
3. 86mm - High compression
The Compression ratios are 10.5:1 with the 66mm crank and 11.2:1 with the 70.4mm.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0089118

The product you are viewing cross references to these numbers

This is a new set of 6 cast pistons. Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin.



Fits: Porsche 911S 2.2L / 2.4L

Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Pistons: Hypereutectic

Kit includes: 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.

OPTIONS:
1. 84mm - Low compression
The Compression ratios are 8.5:1 with the 66mm crank and 9.1:1 with the 70.4mm.
2. 84mm - High compression
The Compression ratios are 9.1:1 with the 66mm crank and 9.7:1 with the 70.4mm.
3. 86mm - High compression
The Compression ratios are 9.5:1 with the 66mm crank and 10.7:1 with the 70.4mm.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0089118

The product you are viewing cross references to these numbers

This is a new set 86mm Porsche 356/912 JE pistons.



Fits: Porsche 356C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case.

JE Forged pistons with 30° Angle. JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket

Engine size: 1600cc
Stroke: 74mm
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°

Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0081186JEP

The product you are viewing cross references to these numbers

This is a new set 86mm Porsche 356/912 JE Pistons.

Fits: Porsche 356A and 356B, Super 90, 1955-63 with the 3 piece Case.

JE Forged Pistons with 22° Angle. JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket.

Engine size: 1600cc
Stroke: 74mm
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 22°

Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0081186JEAP

The product you are viewing cross references to these numbers

This is a new set of Big Bore 86mm Porsche 356/912 pistons.



Fits: Porsche 356C / SC 1963-66 & Porsche 912 1965 and Up with the 3 piece Case.

Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin.

Engine size: 1600cc
Stroke: 74mm
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°

Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0081186SP

The product you are viewing cross references to these numbers

This is a new set of Big Bore 86mm Porsche 356 pistons.


Fits: Porsche 356 A and B, Super 90, 1955-63 with the 3 piece Case.

Graphite Coated Hypereutectic pistons with the 22° Angle, valve pockets, and the 22mm Pin.

Engine size: 1600cc
Stroke: 74mm
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 22°

Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0081186EP

The product you are viewing cross references to these numbers

This is a new set Porsche 356/912 JE High Compression pistons.



Fits: Porsche 356 C / SC 1963-66 & Porsche 912 1965 and Up with the 3 piece case.

JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket and the 30° Angle. This is a High Compression Piston kit 11.5:1 more commonly used in race-cars .

Engine size: 1600cc
Stroke: 74mm
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°

Kit includes: 4 Pistons, A set Piston Rings, and 4 wrist pins and clips.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

008118

The product you are viewing cross references to these numbers

This is a new set of 80mm Porsche 356 pistons. It fits Pre "A" Porsche 1948-55 with the early 2 piece Case. Pistons are Graphite Coated Hypereutectic with valve pockets, and the 22mm Pin.


Fits: Porsche 356 Pre A 1500cc

It is also commonly used as a big bore supplement for the early 36 Horse VW Engine, but requires a lot of machine work.

Engine size: 1500cc
Stroke: 74mm
Pistons: Hypereutectic

Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0081180P

The product you are viewing cross references to these numbers

This is a new set of Type 4 flat top JE Pistons.



JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. This set comes with a 34.6mm Compression Height and the 24mm Pin. The slightly smaller compression height allows you to easily build small stroked engines 71 to 78mm with the Standard length rods that have the 24mm pins giving you the option to Build 2.3L and bigger Engines.

Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.

Stroke: 71 to 78mm
Pistons: Forged JE
Compression Height: 34.60mm
Pin: 24mm

Set includes: 4 pistons, 4 pins, 4 clips and a set of rings

This is a new set of Type 4 flat top JE Pistons.



JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. This set comes with a 34.6mm Compression Height and the 24mm Pin. The slightly smaller compression height allows you to easily build small stroked engines 71 to 78mm with the Standard length rods that have the 24mm pins giving you the option to Build 2.3L and bigger Engines.

Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.

Stroke: 71 to 78mm
Pistons: Forged JE
Compression Height: 34.60mm
Pin: 24mm

Set includes: 4 pistons, 4 pins, 4 clips and a set of rings

This is a new set of Type 4 2.0 liter flat top JE Pistons.



JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. This set comes with a 30.08mm Compression Height with a 22mm Pin. The smaller compression height allows you to build large stroked engines 78 to 86mm using longer rods that have the 22mm pins.

Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.
Engine size: 2000cc

Stroke: 78 to 86mm
Pistons: Forged JE
Compression Height: 30.08mm
Pin: 22mm

Set includes: 4 pistons, 4 cylinders, 4 pins and a set of rings

This is a new set of Type 4 2.0 liter 96mm flat top JE Pistons.



Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.
Engine size: 2000cc

JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. This set comes with a 34.6mm Compression Height and the 24mm Pin. The slightly smaller compression height allows you to easily build small stroked engines 71 to 78mm with the Standard length rods that have the 24mm pins.

Stroke: 71 to 78mm
Pistons: Forged JE
Compression Height: 34.60mm
Pin: 24mm

Set includes: 4 cylinders, 4 pins and a set of rings

Dished Piston Set, 94x71mm.



Fits: Porsche 914, Type 4
Engine size: 2000cc

Stroke: For 71mm stroke crankshafts
Pistons: Hypereutectic aluminium alloy
Compression Height: 35.5mm
Dish cc: 10cc

Set includes: 4 pistons, 4 cylinders, 4 pins and a set of rings

Dished Piston Set, 93x66mm.



Fits: Porsche 914, Type 4
Engine size: 1800cc

Stroke: For 66mm stroke crankshafts
Pistons: Hypereutectic aluminium alloy
Compression Height: 42mm
Dish cc: 10cc

Set includes: 4 pistons, 4 cylinders, 4 pins and a set of rings

Flat top Piston Set.



Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.

Stroke: 71 to 78mm
Pistons: Hypereutectic aluminium alloy
Compression Height: 35.50mm
Pin: 24mm

Set includes: 4 pistons, 4 pins and a set of rings.

96x71mm Flat top Piston Set



Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.
Engine size: 2000cc

Stroke: For use with 71mm to 78mm Crankshafts
Pistons: Hypereutectic aluminium alloy
Compression Height: 35.50mm
Pin: 24mm

Set includes: 4 pistons, 4 pins and a set of rings

Piston set, Flat top 96x66mm



Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.

Stroke: For 66mm Crankshaft
Pistons: Hypereutectic aluminum alloy
Compression Height: 41.3mm

Set includes: 4 pistons,4 pins and a set of rings.

This is a new set of Type 4 2.0 liter 94mm flat top slipper skirt performance pistons. These are high compression European style pistons. Perfect for adding some compression to your performance rebuild, or for those in the European market.



Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.

Engine size: 2000cc
Stroke: 71 to 78
Pistons: Hypereutectic aluminum alloy
Compression Height: 35.2mm

Set includes: 4 pistons, 4 cylinders, 4 pins and a set of rings

Piston set, Flat top 90x66mm.



Fits: Porsche 914, Type 4

Engine size: 1700cc
Stroke: For 66mm stroke crankshafts
Pistons: Hypereutectic aluminium alloy
Compression Height: 42mm

Set includes: 4 pistons, 4 pins and a set of rings.

This is a set of (6) Cast iron Cylinder for the 2.7 Liter 911 engine. The Cast Iron Liners come without the head gasket grove.



Fits:
Porsche 911 2.7L

Cylinders: Cast Iron

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0089119

The product you are viewing cross references to these numbers

This is a set of (6) Biral Cylinder for the 2.2 & 2.4 Liter 911 engine



Fits:
Porsche 911 2.2L / 2.4L

Cylinders: Biral

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0089118

The product you are viewing cross references to these numbers

This is a set of (6) Big Bore Biral cylinders for the 2.0 Liter 911 engine.



Fits:
Porsche 911 2.0L

Cylinders: Biral.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0089118

The product you are viewing cross references to these numbers

This is a new set of 86mm Big Bore Porsche 356 or 912 Biral Liners. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work.



Fits:
Porsche 356
Porsche 912

Cylinders: Biral.
Kit included: 4 Cylinders

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0081186BL

The product you are viewing cross references to these numbers

This is a new set of 86mm Big Bore Porsche 356 or 912 Cast Iron Liners. This kit requires no machine work.



Fits:
Porsche 356
Porsche 912

Cylinders: Cast Iron.
Kit included: 4 Cylinders

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0081186SL

The product you are viewing cross references to these numbers

This is a new set of 83.5mm Big Bore Porsche 356 or 912 Biral Liners. This kit requires no machine work.



Fits:
Porsche 356
Porsche 912

Cylinders: Biral
Kit included: 4 Cylinders

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0081183BL

The product you are viewing cross references to these numbers

This is a new set of 82.5mm Porsche 356 or 912 Biral Liners. This kit requires no machine work.



Fits:
Porsche 356
Porsche 912

Cylinders: Biral
Kit included: 4 Cylinders

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0081182BL

The product you are viewing cross references to these numbers

This is a new set of 80mm Pre A Porsche 356 Liners for the 2 piece split case. This kit requires no machine work.


Fits:
Porsche 356 Pre-A

This Kit is also commonly used as a Big bore Cylinder set for the early VW 36 HP Machine work is Required when installing them in a 36HP

Cylinders: Cast Iron.
Kit included: 4 Cylinders

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0081180L

The product you are viewing cross references to these numbers

This is a new set of 103mm/104mm/105mm Type 4 or Porsche 912E & 914 cylinders. This kit requires machine work Both the heads and Case will need to be opened for the 103mm/104mm/105mm Bore.



Fits:
Porsche 914
Porsche 912 E

Cylinder is 14.6mm longer, Designed to be "cut to fit" for long stroke or long rod engines.

Cylinders: Cast Iron.
Machine Work Required

Kit included: 4 Cylinders

This is a new set of 103, 104 or 105mm Type 4 or Porsche 914 cylinders. This kit requires machine work you will need to open the heads and case.



Fits:
Porsche 914

Cylinders: Cast Iron.
Kit included: 4 Cylinders

This is a new set of Biral, 96mm Big Bore Type 4 or Porsche 914 cylinders.
Kit requires no crankcase machine work and will slip into any 1.7 /1.8 or 2.0ltr cases.

1.7ltr cylinder heads will need to be opened up to 96mm



Fits:
Porsche 914

Cylinders: Aluminium Biral
Kit included: 4 Cylinders

Piston Set
1.7ltr / 1.8ltr - VW9600T4S66P
2.0ltr - VW9600T4S71P

This is a new set of 96mm Big Bore Type 4 or Porsche 914 cylinders.

Kit requires no crankcase machine work and will slip into any 1.7 /1.8 or 2.0ltr cases.

1.7ltr cylinder heads will need to be opened up to 96mm



Fits:
Porsche 914

Cylinders: Cast Iron.
Kit included: 4 Cylinders

Piston Set
1.7ltr / 1.8ltr - VW9600T4S66P
2.0ltr - VW9600T4S71P

This is a new set of 94mm 2.0 Type 4 or Porsche 914 cylinders. This kit requires no machine work.



Fits:
Porsche 914

Cylinders: Cast Iron.
Kit included: 4 Cylinders

This is a new set of 93mm 1800cc Type 4 or Porsche 914 cylinders. This kit requires no machine work.



Fits:
Porsche 914

Cylinders: Cast Iron.
Kit included: 4 Cylinders

This is a new set of 90mm 1700cc Type 4 or Porsche 914 cylinders. This kit requires no machine work.



Fits:
Porsche 914

Cylinders: Cast Iron.
Kit included: 4 Cylinders