Ohlins
In order to fit Ohlins suspension kit to cars with PASM (Porsche Active Suspension Management) you will need to disable it with this PASM cancellation kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
35020-09
The product you are viewing cross references to these numbers
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
In order to fit Ohlins suspension kit to cars with PASM (Porsche Active Suspension Management) you will need to disable it with this PASM cancellation kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
35020-10
The product you are viewing cross references to these numbers
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Springs to be ordered separately. 48010-19 & 48010-23
The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.
These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.
This kit is especially developed for high end racing and also TÜV approved.
Technical Info:
DFV (Dual Flow Valve)
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year Limited Warranty
Height adjustable
Springs ordered separately
Front Shocks:
McPherson Strut
Single bleed adjuster
Spring preload adjuster
Dustcovers
Use with original top mounts
Rear Shocks:
Conventional Shock Absorber
Single bleed adjuster
Spring preload adjuster
Dustcovers
Use with original top mounts
Fits the following vehicles:
Porsche Boxster 718 (Type 982) / Cayman 718 (Type 982) year 2016>>
Porsche Cayman 981C / Cayman S (981C), year 2012-2016
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
Fits the following vehicles:
Porsche 911 (991) Carrera 2S /Carrera 2
The coil over set will be delivered without springs.
Coil springs need to be ordered separately.
The Öhlins Road & Track range for Porsche covers a major part of 991 Carrera / Carrera S models with kits for all needs. It's a kit designed for track day use and club racing but with the DFV technology it also offers superb handling and comfort on the way to and from the tracks.
The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.
These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.
This kit is especially developed for high end racing and also TÜV approved.
Technical Info:
DFV (Dual Flow Valve)
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year Limited Warranty
Height adjustable
prings ordered seperately
Front Shocks:
McPherson Strut
Single bleed adjuster
Spring preload adjuster (approx. 8 mm lower than standard)
Coil Springs
Dustcovers
Use with original top mounts
Rear Shocks:
Conventional Shock Absorber
Single bleed adjuster
Spring preload adjuster (approx. 10 mm lower than standard)
Coil Springs
Dustcovers
Use with original top mounts
Notes:
The recommended springs for this set are:
- front: spring rate 70 N/mm, article no. 48010-19
- rear: spring rate 120 N/mm, article no. 48010-39
For the POS MP70 a PASM cancellation kit with the article no. 35020-07 is available. The cancellation kit is just plugged into the original suspension controls and deactivates control lamps and error reports when electronically adjustable EOM suspension is replaced by a mechanical system. No further programming is needed.
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
Complete With Adjustable Aluminium Top Mounts
The Öhlins Road & Track range for Porsche covers a major part of all 964 models with kits for all needs. It's a kit designed for track day use and club racing but with the DFV technology it also offers superb handling and comfort on the way to and from the tracks.
The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.
These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.
Technical Info:
• DFV (Dual Flow Valve)
• Rebuildable
• Corrosion salt spray tested (ISO 9227)
• 2 year Limited Warranty
• Height adjustable
Front Shocks:
• McPherson shock absorber
• Adjustable length +/- 15mm
• Single adjustable
• Spring preload adjuster
• Coil Springs (50 N/mm)
• with Aluminium Top Mounts
• Camber adjustable
• Dustcovers
Rear Shocks:
• Conventional shock absorber
• Adjustable length +/- 15mm
• Single adjustable
• Spring preload adjuster
• Coil Springs (90 N/mm)
• with Aluminium Top Mounts
• Dustcovers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.
These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.
This kit is especially developed for high end racing and also TÜV approved.
Technical Info:
DFV (Dual Flow Valve)
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year Limited Warranty
Height adjustable
20 mm lower than standard
Front Shocks:
McPherson Strut
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Rear Shocks:
Conventional Shock Absorber
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Fits:
Porsche 997 GT3*
Porsche 997 GT2*
*Cars WITH PASM Porsche Active Suspension Management system this kit can be fitted kit but you will require a PASM cancellation kit to delete the light on the dash board
For Mounting Instructions CLICK HERE
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII GT2 RS 2011>>
The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.
These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.
This kit is especially developed for high end racing and also TÜV approved.
Technical Info:
DFV (Dual Flow Valve)
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year Limited Warranty
Height adjustable
20 mm lower than standard
Front Shocks:
McPherson Strut
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Rear Shocks:
Conventional Shock Absorber
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Fits:
Porsche 997 C4*
Porsche 997 Turbo*
*Cars WITH PASM Porsche Active Suspension Management system this kit can be fitted kit but you will require a PASM cancellation kit to delete the light on the dash board
For Mounting Instructions CLICK HERE
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII Turbo 2009>>
The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.
These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.
This kit is especially developed for high end racing and also TÜV approved.
Technical Info:
DFV (Dual Flow Valve)
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year Limited Warranty
Height adjustable
20 mm lower than standard
Front Shocks:
McPherson Strut
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Rear Shocks:
Conventional Shock Absorber
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Fits:
Porsche 997 C2*
*Cars WITH PASM Porsche Active Suspension Management system this kit can be fitted kit but you will require a PASM cancellation kit to delete the light on the dash board
For Mounting Instructions CLICK HERE
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.
These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.
This kit is especially developed for high end racing and also TÜV approved.
Technical Info:
DFV (Dual Flow Valve)
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year Limited Warranty
Height adjustable
20 mm lower than standard
Front Shocks:
McPherson Strut
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Rear Shocks:
Conventional Shock Absorber
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Fits:
Porsche 996 GT3
Porsche 996 GT3S
Porsche 996 GT2
For Mounting Instructions CLICK HERE
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.
These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.
This kit is especially developed for high end racing and also TÜV approved.
Technical Info:
DFV (Dual Flow Valve)
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year Limited Warranty
Height adjustable
20 mm lower than standard
Front Shocks:
McPherson Strut
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Rear Shocks:
Conventional Shock Absorber
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Fits:
Porsche 996 C4
Porsche 996 Turbo
For Mounting Instructions CLICK HERE
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.
These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.
This kit is especially developed for high end racing and also TÜV approved.
Technical Info:
DFV (Dual Flow Valve)
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year Limited Warranty
Height adjustable
20 mm lower than standard
Front Shocks:
McPherson Strut
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Rear Shocks:
Conventional Shock Absorber
Single bleed adjuster
Spring preload adjuster
Coil Springs
Dustcovers
Use with original top mounts
Fits:
Porsche 996 C2
For Mounting Instructions CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POZMI00S1
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005