Elephant Racing
About Elephant Racing
Elephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.
Silicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology.
Racing bump steer kit. Porsche 911 / 930 / 914 / 912
Code: 211090
Spring plate bush kit
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 914 - 1970 to 1976
Porsche 912 - 1976 to 1976
Precision Steering Under Pressure
Our top-performing bump steer solution is super strong and provides the sharpest, most predictable steering response. It eliminates steering knuckle twist induced toe steer and can be used on raised spindles of any height.
Double steering knuckle – Holds tie rod end between two steering knuckles to eliminate knuckle flex regardless of bump steer spacer length.
Long bump steer spacers (required with raised spindles) place bending loads that twist stock steering knuckles. Twist causes undesired toe steer.
Second steering knuckle is welded to the strut body
Bump steer adjustable – allows massive bump steer adjustment range in .125 inch increments. Double shear mounting provides solid support for even the longest bump steer spacing.
Rod End – Weather sealed precision rods ends included work with regular turbo tie rods. Included boots to seal out dirt and and water for extended life.
Our purpose-made rod ends are extra long to ensure proper threaded engagement with standard turbo tie rods
Spindle height – Kits available for 19mm, 30mm, 40mm spindle height.
Kits are easily modified for use with essentially any spindle height.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
211090
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 914 - 1970 to 1976
Porsche 912 - 1976 to 1976
Precision Steering Under Pressure
Our top-performing bump steer solution is super strong and provides the sharpest, most predictable steering response. It eliminates steering knuckle twist induced toe steer and can be used on raised spindles of any height.
Double steering knuckle – Holds tie rod end between two steering knuckles to eliminate knuckle flex regardless of bump steer spacer length.
Long bump steer spacers (required with raised spindles) place bending loads that twist stock steering knuckles. Twist causes undesired toe steer.
Second steering knuckle is welded to the strut body
Bump steer adjustable – allows massive bump steer adjustment range in .125 inch increments. Double shear mounting provides solid support for even the longest bump steer spacing.
Rod End – Weather sealed precision rods ends included work with regular turbo tie rods. Included boots to seal out dirt and and water for extended life.
Our purpose-made rod ends are extra long to ensure proper threaded engagement with standard turbo tie rods
Spindle height – Kits available for 19mm, 30mm, 40mm spindle height.
Kits are easily modified for use with essentially any spindle height.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
211090
2110902
2110903
2110904
91134703100
91134703100
91134732204
93034732200
93034703101
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £392.98
Lower wishbone ball joint rebuild kit. Porsche 944 / 968
Code: 1-RB944
Lower wishbone ball joint rebuild kit.
Kit for both arms - 1 kit required per car
Fits
Porsche 944 - 1985/2 to 1991 - Aluminium lower arms
Porsche 968 - 1992 to 1995
Rebuild Your Worn Ball Joints
This kit allows replacement of the ball joints on Porsche 944 cars with aluminium lower control arms.
You can easily replace the aluminium control arm ball joints with units that are better than those that the car was delivered with.
No special tools required and no machine work is necessary.
Kit includes solid aluminium bronze internal bushings, forged chromolly ball pins and lower plates with grease fittings.
One kit will replace the ball joints on both control arms.
Feb 1985 to 1995 944 cars with aluminium lower arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1-RB944
The product you are viewing cross references to these numbers
Kit for both arms - 1 kit required per car
Fits
Porsche 944 - 1985/2 to 1991 - Aluminium lower arms
Porsche 968 - 1992 to 1995
Rebuild Your Worn Ball Joints
This kit allows replacement of the ball joints on Porsche 944 cars with aluminium lower control arms.
You can easily replace the aluminium control arm ball joints with units that are better than those that the car was delivered with.
No special tools required and no machine work is necessary.
Kit includes solid aluminium bronze internal bushings, forged chromolly ball pins and lower plates with grease fittings.
One kit will replace the ball joints on both control arms.
Feb 1985 to 1995 944 cars with aluminium lower arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1-RB944
1-RB944
94434102702
94434192731
94434102802
94434192831
95134102700
95134102800
5134100000
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£264.00
Now £258.72
In stock
Control arm mount HD (Rear position). Porsche 944 / 968
Code: 2290012
Sport rubber lower wishbone caster block
Sold individually - 2 required per car
Fits
Porsche 944 - 1985/2 to 1991 - Aluminium lower arms
Porsche 968 - 1992 to 1995
Restore Ride and Performance
A true rubber replacement bushing for the factory caster block.
"Sport" hardness rubber compound improves performance by reducing deflection under load, while maintaining the ride characteristics of rubber.
Rubber is the choice if you want to restore factory ride and performance
Feb 1985 to 1995 944 cars with aluminium lower arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2290012
The product you are viewing cross references to these numbers
Sold individually - 2 required per car
Fits
Porsche 944 - 1985/2 to 1991 - Aluminium lower arms
Porsche 968 - 1992 to 1995
Restore Ride and Performance
A true rubber replacement bushing for the factory caster block.
"Sport" hardness rubber compound improves performance by reducing deflection under load, while maintaining the ride characteristics of rubber.
Rubber is the choice if you want to restore factory ride and performance
Feb 1985 to 1995 944 cars with aluminium lower arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2290012
2290012
95134102300
95134102301
2211700
95134102300
95134102301
95134102330
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£98.00
Now £96.04
Orderable
QuickChange spring plate kit for Porsche 356
Code: 2080908
QuickChange spring plate kit
1 kit required per car
Fits
Porsche 356A
Porsche 356B - T5 Models
Change Torsion Bars and Adjust Ride Height
QuickChange spring plates make fast-work of torsion bar re-indexing and replacement.
Screw-type adjuster makes corner balancing and ride height adjustment a breeze. Pairs the high quality of the factory design with ease of servicing.
Setup is fast and easy
If you've ever re-indexed torsion bars to correct ride height, you can really appreciate the benefits of QuickChange.
Used in combination with our QuickChange Torsion Bars and Polybronze bearings, this spring plate allows rapid replacement or re-indexing of torsion bars.
• 5 minute torsion bar changes
• Fast and easy ride-height adjustment
• Accepts standard bushings
QuickChange Torsion Bar Changeout
QuickChange Torsion Bars can be extracted through the QuickChange Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
Unlike other aftermarket spring plates, QuickChange Spring Plates bolt the plates together. This prevents the plates "halves" from sliding against each other and eliminates failures and metallic clicking noises common with competing products.
Can be used with any torsion bar and bushing that fits factory spring plates – not included – however QuickChange Torsion bars and PolyBronze Bearings are required to use torsion bar extraction features.
356 used two different systems of of spring plates, cover plate, bushings, and torsion bars
Pre-A, C and CS chassis:
Came equipped with 553mm long torsion bars. Cover plates have no center hole and a 4-nub style bushing. Spring plates have a short "tube" section that is not visible when installed because it does not pass through the cover plate. Outer bushings are larger 48mm Id and inner bushings have a smaller 45mm ID.
Polybronze may be used on these spring plates by fashioning a sleeve for the spring plate to increase its diameter to 48mm, and converting to a round bushing type coverplate.
Alternativley Elephant Racing Polybronze, QuickChange spring plates, and Torsion bars can be used on these cars provided all 4 components (torsion bars, cover plate, spring plate, bushings) are converted together.
A and B chassis:
Came quipped with 627mm long torsion bars. Cover plates have a hole in the center. Spring plates have a visible "tube" section that passes through the cover plate. Both inner and out bushings are larger ID about 48mm.
Elephant Racing Polybronze, QuickChange spring plates, and Torsion bars are all designed for direct fit with this combination.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2080908
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 356A
Porsche 356B - T5 Models
Change Torsion Bars and Adjust Ride Height
QuickChange spring plates make fast-work of torsion bar re-indexing and replacement.
Screw-type adjuster makes corner balancing and ride height adjustment a breeze. Pairs the high quality of the factory design with ease of servicing.
Setup is fast and easy
If you've ever re-indexed torsion bars to correct ride height, you can really appreciate the benefits of QuickChange.
Used in combination with our QuickChange Torsion Bars and Polybronze bearings, this spring plate allows rapid replacement or re-indexing of torsion bars.
• 5 minute torsion bar changes
• Fast and easy ride-height adjustment
• Accepts standard bushings
QuickChange Torsion Bar Changeout
QuickChange Torsion Bars can be extracted through the QuickChange Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
Unlike other aftermarket spring plates, QuickChange Spring Plates bolt the plates together. This prevents the plates "halves" from sliding against each other and eliminates failures and metallic clicking noises common with competing products.
Can be used with any torsion bar and bushing that fits factory spring plates – not included – however QuickChange Torsion bars and PolyBronze Bearings are required to use torsion bar extraction features.
356 used two different systems of of spring plates, cover plate, bushings, and torsion bars
Pre-A, C and CS chassis:
Came equipped with 553mm long torsion bars. Cover plates have no center hole and a 4-nub style bushing. Spring plates have a short "tube" section that is not visible when installed because it does not pass through the cover plate. Outer bushings are larger 48mm Id and inner bushings have a smaller 45mm ID.
Polybronze may be used on these spring plates by fashioning a sleeve for the spring plate to increase its diameter to 48mm, and converting to a round bushing type coverplate.
Alternativley Elephant Racing Polybronze, QuickChange spring plates, and Torsion bars can be used on these cars provided all 4 components (torsion bars, cover plate, spring plate, bushings) are converted together.
A and B chassis:
Came quipped with 627mm long torsion bars. Cover plates have a hole in the center. Spring plates have a visible "tube" section that passes through the cover plate. Both inner and out bushings are larger ID about 48mm.
Elephant Racing Polybronze, QuickChange spring plates, and Torsion bars are all designed for direct fit with this combination.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2080908
2080908
69533301300
64434105
644 34104
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
£520.00
Now £509.60
Orderable
Spring plate bearing kit with cover plates for Porsche 356
Code: 2061601
Spring plate bearing kit with cover plates.
1 kit, req'd per car
Fits
Porsche 356 1948 - 1965
Spring plate bearing kit
Want to experience precision driving, faster lap times, improved road feel and feedback?
Our patented PolyBronze suspension bearings set a new standard for performance, ride quality and ease-of-installation. Regular polyurethane/plastic suspension bushings are obsolete!
PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.
✔ No Squeaks
✔ Smooth ride quality
✔ Easy installation
✔ Integral Grease fittings and grooves
Why PolyBronze Bearings Are Superior To Plastic Bushings
Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is “grippy” with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tire adhesion.
PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.
The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality.
356 used two different systems of of spring plates, cover plate, bushings, and torsion bars
Pre-A, C and CS chassis:
Came equipped with 553mm long torsion bars. Cover plates have no centre hole and a 4-nub style bushing. Spring plates have a short “tube” section that is not visible when installed because it does not pass through the cover plate. Outer bushings are larger 48mm Id and inner bushings have a smaller 45mm ID.
Polybronze may be used on these spring plates by fashioning a sleeve for the spring plate to increase its diameter to 48mm.
Alternatively Elephant Racing Polybronze, QuickChange spring plates, and Torsion bars can be used on these cars provided all 4 components (torsion bars, cover plate, spring plate, bushings) are converted together.
A and B chassis:
Came equipped with 627mm long torsion bars. Cover plates have a hole in the centre. Spring plates have a visible “tube” section that passes through the cover plate. Both inner and out bushings are larger ID about 48mm.
Elephant Racing Polybronze bearings are designed for direct fit with this combination.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2061601
The product you are viewing cross references to these numbers
1 kit, req'd per car
Fits
Porsche 356 1948 - 1965
with Long tube spring plates or QuickChange spring plates
Spring plate bearing kit
Want to experience precision driving, faster lap times, improved road feel and feedback?
Our patented PolyBronze suspension bearings set a new standard for performance, ride quality and ease-of-installation. Regular polyurethane/plastic suspension bushings are obsolete!
PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.
✔ No Squeaks
✔ Smooth ride quality
✔ Easy installation
✔ Integral Grease fittings and grooves
Why PolyBronze Bearings Are Superior To Plastic Bushings
Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is “grippy” with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tire adhesion.
PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.
The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality.
356 used two different systems of of spring plates, cover plate, bushings, and torsion bars
Pre-A, C and CS chassis:
Came equipped with 553mm long torsion bars. Cover plates have no centre hole and a 4-nub style bushing. Spring plates have a short “tube” section that is not visible when installed because it does not pass through the cover plate. Outer bushings are larger 48mm Id and inner bushings have a smaller 45mm ID.
Polybronze may be used on these spring plates by fashioning a sleeve for the spring plate to increase its diameter to 48mm.
Alternatively Elephant Racing Polybronze, QuickChange spring plates, and Torsion bars can be used on these cars provided all 4 components (torsion bars, cover plate, spring plate, bushings) are converted together.
A and B chassis:
Came equipped with 627mm long torsion bars. Cover plates have a hole in the centre. Spring plates have a visible “tube” section that passes through the cover plate. Both inner and out bushings are larger ID about 48mm.
Elephant Racing Polybronze bearings are designed for direct fit with this combination.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2061601
2061600
64433313100
64433313101
2061601
64433315100
64433315101
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
£890.00
Now £872.20
Orderable
Spring plate PolyBronze bearings for Porsche 924 / 944 / 968
Code: 2231800
Spring plate PolyBronze bearings
Fits
Porsche 924 - 1976 to 1988
Porsche 944 - 1982 to 1991
Porsche 968 - 1992 to 1995
High Performance Bushing Replacement - No Squeaks
Protected by US Patent 7,325,796
Want to experience precision driving, faster lap times, improved road feel and feedback?
Our patented PolyBronze suspension bearings set a new standard for performance, ride quality and ease-of-installation.
Regular polyurethane/plastic suspension bushings are obsolete!
PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.
• No Squeaks
• Smooth ride quality
• Easy installation
• Integral Grease fittings and grooves
• Extremely low friction
PolyBronze bearings are superior to plastic bushing alternatives, here's why:
Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is "grippy" with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tyre adhesion.
PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.
The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality. PolyBronze bearings replace compressible factory rubber bushings.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2231800
The product you are viewing cross references to these numbers
Fits
Porsche 924 - 1976 to 1988
Porsche 944 - 1982 to 1991
Porsche 968 - 1992 to 1995
High Performance Bushing Replacement - No Squeaks
Protected by US Patent 7,325,796
Want to experience precision driving, faster lap times, improved road feel and feedback?
Our patented PolyBronze suspension bearings set a new standard for performance, ride quality and ease-of-installation.
Regular polyurethane/plastic suspension bushings are obsolete!
PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.
• No Squeaks
• Smooth ride quality
• Easy installation
• Integral Grease fittings and grooves
• Extremely low friction
PolyBronze bearings are superior to plastic bushing alternatives, here's why:
Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is "grippy" with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tyre adhesion.
PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.
The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality. PolyBronze bearings replace compressible factory rubber bushings.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2231800
2231800
95133302100
477511201
477511202
111511245E
113511205B
113511206B
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£345.00
Now £338.10
Orderable
Adjustable rear drop link kit. Porsche 911 / 930 / 912
Code: 2271002
Adjustable rear drop link kit.
1 kit required per car
Fits
Porsche 911 - 1978 to 1989
Porsche 911 turbo - 1978 to 1989
Upgrade your factory rear swaybar (anti roll bar) with our adjustable drop links.
These attach to the camber adjustment holes on the spring plates.
Teflon-lined precision rod ends for added durability and increased articulation.
Fully weather-sealed to extend bearing life
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271002
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 911 - 1978 to 1989
Porsche 911 turbo - 1978 to 1989
Upgrade your factory rear swaybar (anti roll bar) with our adjustable drop links.
These attach to the camber adjustment holes on the spring plates.
Teflon-lined precision rod ends for added durability and increased articulation.
Fully weather-sealed to extend bearing life
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271002
2271002
93033307100
93033307101
93033307200
93033307201
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
£257.00
Now £251.86
Orderable
Adjustable front drop link kit. Porsche 911 / 912
Code: 2271001
Adjustable front drop link kit.
Fits
Porsche 911 - 1966 to 1973
Porsche 912 - 1966 to 1969
1 kit required per car
Upgrade your factory front through body type swaybar (anti roll bar) with our adjustable drop links.
Left / Right threaded ends make for easy length adjustment to eliminate pre-load.
Oversized teflon-lined precision rod ends for added durability and increased articulation.
Fully weather-sealed to extend bearing life
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271001
The product you are viewing cross references to these numbers
Fits
Porsche 911 - 1966 to 1973
Porsche 912 - 1966 to 1969
1 kit required per car
Upgrade your factory front through body type swaybar (anti roll bar) with our adjustable drop links.
Left / Right threaded ends make for easy length adjustment to eliminate pre-load.
Oversized teflon-lined precision rod ends for added durability and increased articulation.
Fully weather-sealed to extend bearing life
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271001
2271001
90134307603
90134378300
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£250.00
Now £245.00
Orderable
Lightweight strut brace. Porsche 911 / 930 / 912
Code: 2030900
Lightweight strut brace
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Lightweight, Triangulated Option
Our lightweight strut braces are available in a choice of single bar and triangulated styles. These strut braces are an excellent and economic solution for reducing strut tower flex.
Our more sophisticated QuickChange Strut Brace System may be of interest if you seeking additional features.
Triangulation bests the single bar braces by increasing rigidity. Traditional braces tie strut towers together force them to move in parallel, sharing the cornering force of the loaded tire over both towers to reduce flex. Triangulation locks the towers rigidly in place to maintain camber settings – even through high G corners.
• Strengthens strut towers to minimize chassis flex
• Easy bolt-on installation
• 1978 to 1989 cars require one hole to be drilled for the triangulated brace
• Cars prior to 1978 already have the hole in place
Made from sturdy aluminum tubing our braces are tapered and terminated with quality rod-end fittings for precise alignment, adjustability and rigidity. Adjustable pre-load allows you to dial in a bit of extra camber if desired. All required mounting hardware is included.
Fit and finish make these braces as attractive as they are functional.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2030900
The product you are viewing cross references to these numbers
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Lightweight, Triangulated Option
Our lightweight strut braces are available in a choice of single bar and triangulated styles. These strut braces are an excellent and economic solution for reducing strut tower flex.
Our more sophisticated QuickChange Strut Brace System may be of interest if you seeking additional features.
Triangulation bests the single bar braces by increasing rigidity. Traditional braces tie strut towers together force them to move in parallel, sharing the cornering force of the loaded tire over both towers to reduce flex. Triangulation locks the towers rigidly in place to maintain camber settings – even through high G corners.
• Strengthens strut towers to minimize chassis flex
• Easy bolt-on installation
• 1978 to 1989 cars require one hole to be drilled for the triangulated brace
• Cars prior to 1978 already have the hole in place
Made from sturdy aluminum tubing our braces are tapered and terminated with quality rod-end fittings for precise alignment, adjustability and rigidity. Adjustable pre-load allows you to dial in a bit of extra camber if desired. All required mounting hardware is included.
Fit and finish make these braces as attractive as they are functional.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2030900
2030900
2040900
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £240.10
QuickChange strut brace system. Porsche 911 / 930 / 912
Code: 216220
QuickChange strut brace system.
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Expandable, quick removal and installation.
Our unique QuickChange™ strut-brace system is available in two configurations and is expandable to grow with your needs. Quick release pins let you remove or reconfigure in minutes.
Expandable – Start with a single-bar strut tower brace and later scale up with triangulation or even a full-blown 935 X brace, the system is completely upgradable. Grow or reconfigure your brace to match your changing needs for chassis rigidity, storage capacity, and budget.
Quick Release – Tubes are secured with quick release pins, each held in place by a detent ball. Quick Release pins allow fast, tool-less removal for service access or expanded stowage capacity.
Build Quality – Truly awesome appearance matches the functionality. Oversized aluminum tubing has a beefy, stout appearance yet remains lightweight and has a purposeful frosted anodize finish. CNC machined billet aluminum clevis ends are anodized a tasteful burgundy color.
Easy Bolt-in Installation – All configurations are completely bolt-in, no welding required. 1978-1989 cars drill one hole for triangulation option. 1966-1977 already have the hole.
QuickChange Strut Brace Video
Four Configurations
Start with any configuration, all can be fully upgraded by simply adding components. No throwaways! And all are quickly and easily removed when necessary with the quick-release pins.
Single Bar – The foundation of the system, the single bar connects the strut towers together for reduced flex.
Triangulated– Triangulation locks the towers even more rigidly in place to maintain camber settings – even through high G corners.
935 X Brace – Inspired by the chassis braces used on 935 race cars, the X brace increases chassis torsional rigidity. Completely bolt on, it attaches to the camber plates and the front corners of the trunk.
935 X Triangulated – The most rigid brace available, this configuration adds the triangulated member to the 935 X brace and is the complete QuickChange X Brace solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
216220
The product you are viewing cross references to these numbers
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Expandable, quick removal and installation.
Our unique QuickChange™ strut-brace system is available in two configurations and is expandable to grow with your needs. Quick release pins let you remove or reconfigure in minutes.
Expandable – Start with a single-bar strut tower brace and later scale up with triangulation or even a full-blown 935 X brace, the system is completely upgradable. Grow or reconfigure your brace to match your changing needs for chassis rigidity, storage capacity, and budget.
Quick Release – Tubes are secured with quick release pins, each held in place by a detent ball. Quick Release pins allow fast, tool-less removal for service access or expanded stowage capacity.
Build Quality – Truly awesome appearance matches the functionality. Oversized aluminum tubing has a beefy, stout appearance yet remains lightweight and has a purposeful frosted anodize finish. CNC machined billet aluminum clevis ends are anodized a tasteful burgundy color.
Easy Bolt-in Installation – All configurations are completely bolt-in, no welding required. 1978-1989 cars drill one hole for triangulation option. 1966-1977 already have the hole.
QuickChange Strut Brace Video
Four Configurations
Start with any configuration, all can be fully upgraded by simply adding components. No throwaways! And all are quickly and easily removed when necessary with the quick-release pins.
Single Bar – The foundation of the system, the single bar connects the strut towers together for reduced flex.
Triangulated– Triangulation locks the towers even more rigidly in place to maintain camber settings – even through high G corners.
935 X Brace – Inspired by the chassis braces used on 935 race cars, the X brace increases chassis torsional rigidity. Completely bolt on, it attaches to the camber plates and the front corners of the trunk.
935 X Triangulated – The most rigid brace available, this configuration adds the triangulated member to the 935 X brace and is the complete QuickChange X Brace solution.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
216220
2162200
2162202
2162203
2162204
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £269.50
Retrofit brake cooling kit. Porsche 911 / 912 / 914
Code: 2190001
Retrofit brake cooling kit.
1 kit required per car
Fits:
Porsche 911 SWB - 1965 to 1968
Porsche 911 - 1969 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 912 - 1965 to 1976
Porsche 914 - 1970 to 1976
This brake cooling kit uses the forward motion of the car to direct a stream of cooling air onto the front rotors. This helps prevent brake fade when the car is driven hard.
Porsche began including front brake cooling air diverters on all the 911 series cars beginning 1990 and continuing through the current models. The reason is simple; they are simple and effective.
Our kit is a simple bolt-on solution that attaches to 911, 912, 930, and 914 front control arms. It holds 993 type diverters in the air stream beneath the car.
The kit includes Elephant Racing brake duct brackets, hardware, and genuine Porsche 993 brake ducts
Includes two air ducts, four brackets, and all hardware.
This is a complete bolt-on kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2190001
The product you are viewing cross references to these numbers
1 kit required per car
Fits:
Porsche 911 SWB - 1965 to 1968
Porsche 911 - 1969 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 912 - 1965 to 1976
Porsche 914 - 1970 to 1976
This brake cooling kit uses the forward motion of the car to direct a stream of cooling air onto the front rotors. This helps prevent brake fade when the car is driven hard.
Porsche began including front brake cooling air diverters on all the 911 series cars beginning 1990 and continuing through the current models. The reason is simple; they are simple and effective.
Our kit is a simple bolt-on solution that attaches to 911, 912, 930, and 914 front control arms. It holds 993 type diverters in the air stream beneath the car.
The kit includes Elephant Racing brake duct brackets, hardware, and genuine Porsche 993 brake ducts
Includes two air ducts, four brackets, and all hardware.
This is a complete bolt-on kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2190001
2190001
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£335.00
Now £328.30
Orderable
Adjustable front camber plate kit. Porsche 924 / 944 / 968
Code: 1-944strtmnt
Adjustable front camber plate kit.
1 kit required per car
Fits:
Porsche 924 and 924S - 1976 to 1988
Porsche 944, 944S, 944S2 and turbo - 1985 to 1991
Porsche 968 - 1992 to 1995
Precision suspension control
Extend the range of camber adjustment and dial in your desired settings with ease.
These billet aluminum plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates.
The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication.
This kit is suited to work perfectly with Von Coilover systems or other similar solutions as well as factory type springs.
All necessary installation hardware is included
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1-944strtmnt
The product you are viewing cross references to these numbers
1 kit required per car
Fits:
Porsche 924 and 924S - 1976 to 1988
Porsche 944, 944S, 944S2 and turbo - 1985 to 1991
Porsche 968 - 1992 to 1995
Precision suspension control
Extend the range of camber adjustment and dial in your desired settings with ease.
These billet aluminum plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates.
The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication.
This kit is suited to work perfectly with Von Coilover systems or other similar solutions as well as factory type springs.
All necessary installation hardware is included
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1-944strtmnt
94434307100
94434307101
95134301804
95134301830
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£610.00
Now £597.80
Orderable
Rear trailing arm bushing kit. Porsche 924 / 944 / 968
Code: 22900
Rear trailing arm bush kit.
4 bushes in kit - 1 kit required per car
Fits:
Porsche 924 and 924S - 1976 to 1988
Porsche 944, 944S, 944S2 and turbo - 1985 to 1991
Porsche 968 - 1992 to 1995
Precision suspension control
Trailing arm bushings are available in Sport or Standard hardness.
Sport bushings have a harder rubber compound for less deflection and more precise handling.
The Sport option provides a nice performance enhancement over the Standard rubber trailing arm bushings.
For a top performing solution see our weather-sealed monoball bearings
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
22900
The product you are viewing cross references to these numbers
4 bushes in kit - 1 kit required per car
Fits:
Porsche 924 and 924S - 1976 to 1988
Porsche 944, 944S, 944S2 and turbo - 1985 to 1991
Porsche 968 - 1992 to 1995
Precision suspension control
Trailing arm bushings are available in Sport or Standard hardness.
Sport bushings have a harder rubber compound for less deflection and more precise handling.
The Sport option provides a nice performance enhancement over the Standard rubber trailing arm bushings.
For a top performing solution see our weather-sealed monoball bearings
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
22900
2290024
PCG501541
477501541
95133102101
95133102131
95133102132
95133102201
95133102231
95133102232
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Prices from: £245.00
CONTROL ARM MOUNT HD MONOBALL (FRONT POSITION). PORSCHE 944 / 968
Code: 2201700
Front control arm front monoball cartridge kit.
1 kit required per car
Fits:
Porsche 944, 944S, 944S2 and turbo - 1985 to 1991
Porsche 968 - 1992 to 1995
Precision suspension control
Control Arm Front Monoball cartridges replace the stock rubber bushings.
Monoballs provide a higher performance than stock bushings as they eliminate rubber mount compression and significantly reduce friction.
They'll also hold alignment settings true.
Weather sealed to keep road dirt out and designed for long life. If you're looking to restore your original suspension, you may also be interested in stock rubber bushings.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2201700
The product you are viewing cross references to these numbers
1 kit required per car
Fits:
Porsche 944, 944S, 944S2 and turbo - 1985 to 1991
Porsche 968 - 1992 to 1995
Precision suspension control
Control Arm Front Monoball cartridges replace the stock rubber bushings.
Monoballs provide a higher performance than stock bushings as they eliminate rubber mount compression and significantly reduce friction.
They'll also hold alignment settings true.
Weather sealed to keep road dirt out and designed for long life. If you're looking to restore your original suspension, you may also be interested in stock rubber bushings.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2201700
2201700
95134102700
94434102702
94434192731
95134102800
94434102802
94434192831
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£275.00
Now £269.50
Orderable
CONTROL ARM MOUNT HD Monoball (REAR POSITION). PORSCHE 944 / 968
Code: 2211700
Front control arm rear monoball cartridge kit.
1 kit required per car
Fits:
Porsche 944, 944S, 944S2 and turbo - 1985 to 1991
Porsche 968 - 1992 to 1995
Precision suspension control
Our control arm rear monoball cartridge replaces the stock caster block.
Increase performance by eliminating rubber compression.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2211700
The product you are viewing cross references to these numbers
1 kit required per car
Fits:
Porsche 944, 944S, 944S2 and turbo - 1985 to 1991
Porsche 968 - 1992 to 1995
Precision suspension control
Our control arm rear monoball cartridge replaces the stock caster block.
Increase performance by eliminating rubber compression.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2211700
2211700
95134102300
95134102301
95134102330
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£345.00
Now £338.10
Orderable
Rear trailing arm monoball cartridge kit. Porsche 924 / 944 / 968
Code: 2221800
Rear trailing arm monoball cartridge kit.
Porsche 924 / 944 / 968
1 kit required per car
Fits:
Porsche 924 and 924S - 1978 to 1988
Porsche 944, 944S, 944S2 and turbo - 1982 to 1991
Porsche 968 - 1992 to 1995
Precision suspension control
These Monoball cartridges replace the original rubber bushings and metal cups of the trailing arm inner mount.
The spherical bearing is maintenance free and requires no lubrication or servicing.
The integrated weather seal keeps contaminates out and extends bearing life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2221800
The product you are viewing cross references to these numbers
Porsche 924 / 944 / 968
1 kit required per car
Fits:
Porsche 924 and 924S - 1978 to 1988
Porsche 944, 944S, 944S2 and turbo - 1982 to 1991
Porsche 968 - 1992 to 1995
Precision suspension control
These Monoball cartridges replace the original rubber bushings and metal cups of the trailing arm inner mount.
The spherical bearing is maintenance free and requires no lubrication or servicing.
The integrated weather seal keeps contaminates out and extends bearing life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2221800
2221800
95133102132
94433102101
95133102232
94433102201
95133102101
95133102131
95133102201
95133102231
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Spring plate cover mounts kit. Porsche 924 / 944 / 968
Code: 2241800
Spring plate cover mounts kit.
1 kit required per car
Fits:
Porsche 924 and 924S - 1978 to 1988
Porsche 944, 944S, 944S2 and turbo - 1982 to 1991
Porsche 968 - 1992 to 1995
Precision suspension control
Replace the compliant rubber upper spring plate mount with these 6061 T6 aluminum solid mounts.
These help to maintain rear alignment by avoiding deflection under load and providing precise handling.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2241800
The product you are viewing cross references to these numbers
1 kit required per car
Fits:
Porsche 924 and 924S - 1978 to 1988
Porsche 944, 944S, 944S2 and turbo - 1982 to 1991
Porsche 968 - 1992 to 1995
Precision suspension control
Replace the compliant rubber upper spring plate mount with these 6061 T6 aluminum solid mounts.
These help to maintain rear alignment by avoiding deflection under load and providing precise handling.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2241800
2241800
94433107500
94433107501
94433107600
94433107601
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£260.00
Now £254.80
Orderable
QuickChange™ spring plate splined hub kit. Porsche 924 / 944 / 968
Code: 2080909
QuickChange™ spring plate splined hub kit.
1 kit required per car
Fits:
Porsche 924 and 924S - 1976 to 1988
Porsche 944, 944S, 944S2 and turbo - 1982 to 1991
Porsche 968 - 1992 to 1995
Change Torsion Bars and Adjust Ride Height
QuickChange spring plates hubs work with your existing spring plates. Make fast-work of torsion bar re-indexing and replacement. Screw-type adjuster makes corner balancing and ride height adjustment a breeze. Pairs the high quality of the factory design with ease of servicing.
• 5 minute torsion bar changes
• Fast and easy ride-height adjustment
• Accepts standard bushings
Setup is fast and easy
If you've ever re-indexed torsion bars to correct ride height, you can really appreciate the benefits of QuickChange.
Used in combination with our QuickChange Torsion Bars and Polybronze bearings, this spring plate allows rapid replacement or re-indexing of torsion bars.
QuickChange Torsion Bar Changeout
QuickChange Torsion Bars can be extracted through the QuickChange Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation.
Can be used with any 944 torsion bar and bushing that fits factory spring plates (not included)
However 944 QuickChange Torsion bars and 944 PolyBronze Bearings are required to use torsion bar extraction features.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2080909
The product you are viewing cross references to these numbers
1 kit required per car
Fits:
Porsche 924 and 924S - 1976 to 1988
Porsche 944, 944S, 944S2 and turbo - 1982 to 1991
Porsche 968 - 1992 to 1995
Change Torsion Bars and Adjust Ride Height
QuickChange spring plates hubs work with your existing spring plates. Make fast-work of torsion bar re-indexing and replacement. Screw-type adjuster makes corner balancing and ride height adjustment a breeze. Pairs the high quality of the factory design with ease of servicing.
• 5 minute torsion bar changes
• Fast and easy ride-height adjustment
• Accepts standard bushings
Setup is fast and easy
If you've ever re-indexed torsion bars to correct ride height, you can really appreciate the benefits of QuickChange.
Used in combination with our QuickChange Torsion Bars and Polybronze bearings, this spring plate allows rapid replacement or re-indexing of torsion bars.
QuickChange Torsion Bar Changeout
QuickChange Torsion Bars can be extracted through the QuickChange Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation.
Can be used with any 944 torsion bar and bushing that fits factory spring plates (not included)
However 944 QuickChange Torsion bars and 944 PolyBronze Bearings are required to use torsion bar extraction features.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2080909
2080909
95133302100
477511202
477511201
113511205B
113511206B
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£425.00
Now £416.50
Orderable
Strut top camber plate bushings. Porsche 911 1965 to 1989
Code: 22900
Strut top camber plate bushings.
1 kit required per car
Fits:
Porsche 911 1965 - 1970
Porsche 911 1971 - 1989
Porsche 912
Porsche 914
Factory Ride & Performance
Available for early style camber plates 1965-1970 and late style 1971-1989.
Easily Installed – Install with the camber plates still in the car using ordinary hand tools.
Restore Ride and Performance – Rubber is the choice if you want to restore factory ride and performance.
Rubber Re-bush
A true rubber replacement bushing for the factory strut top camber plates.
"Sport" hardness rubber compound improves performance by reducing deflection under load, while maintaining the ride characteristics of rubber.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
22900
The product you are viewing cross references to these numbers
1 kit required per car
Fits:
Porsche 911 1965 - 1970
Porsche 911 1971 - 1989
Porsche 912
Porsche 914
Factory Ride & Performance
Available for early style camber plates 1965-1970 and late style 1971-1989.
Easily Installed – Install with the camber plates still in the car using ordinary hand tools.
Restore Ride and Performance – Rubber is the choice if you want to restore factory ride and performance.
Rubber Re-bush
A true rubber replacement bushing for the factory strut top camber plates.
"Sport" hardness rubber compound improves performance by reducing deflection under load, while maintaining the ride characteristics of rubber.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
22900
2290001
2290034
91134101800
90134169503
90134101801
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £117.60
Rear adjustable RS style sway bar drop links. Porsche 993 RS
Code: 2271009
Rear adjustable RS style sway bar (anti roll bar) drop link.
Sold as a pair - 1 pair req'd per car
✓ Maintenance-free precision rod ends
✓ Weather-sealed
✓ Direct Bolt-on replacement
Fits:
Porsche 993 RS
The ideal swaybar (anti roll bar) is completely unloaded at static ride height. Stock drops links almost always preload the swaybar since the car doesn't sit perfectly level due to asymmetries such as driver weight. Our front and rear adjustable-length drop links allow you to eliminate preload of the swaybar for maximum performance.
A preloaded swaybar shifts the weight carried by each of the tires, increasing grip on weighted tires at the expense of decreasing grip on un-weighted tyres. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tire locks up first. Preload can be completely eliminated by adjusting drop link length and swaybar performance optimized.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271009
The product you are viewing cross references to these numbers
Sold as a pair - 1 pair req'd per car
✓ Maintenance-free precision rod ends
✓ Weather-sealed
✓ Direct Bolt-on replacement
Fits:
Porsche 993 RS
The ideal swaybar (anti roll bar) is completely unloaded at static ride height. Stock drops links almost always preload the swaybar since the car doesn't sit perfectly level due to asymmetries such as driver weight. Our front and rear adjustable-length drop links allow you to eliminate preload of the swaybar for maximum performance.
A preloaded swaybar shifts the weight carried by each of the tires, increasing grip on weighted tires at the expense of decreasing grip on un-weighted tyres. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tire locks up first. Preload can be completely eliminated by adjusting drop link length and swaybar performance optimized.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271009
2271009
99333307380
99333307383
99333307382
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) RS 1994-97
£395.00
Now £387.10
Orderable
Rear adjustable drop links standard and sports suspension. Porsche 993
Code: 2271006
Rear adjustable drop links standard and M030 sports suspension.
Sold as a pair - 1 pair req'd per car
✓ Maintenance-free precision rod ends
✓ Weather-sealed
✓ Direct Bolt-on replacement
Fits:
Porsche 993 Carrera 2
Porsche 993 Carrera 4
Porsche 993 Carrera 2S
Porsche 993 Carrera 4S
Porsches 993 turbo
Standard or Sports Suspension (M030)
The ideal swaybar (anti roll bar) is completely unloaded at static ride height. Stock drops links almost always preload the swaybar since the car doesn't sit perfectly level due to asymmetries such as driver weight.Our front and rear adjustable-length drop links for C4/C2 allow you to eliminate preload of the swaybar for maximum performance.
A preloaded swaybar shifts the weight carried by each of the tires, increasing grip on weighted tires at the expense of decreasing grip on un-weighted tyres. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tire locks up first. Preload can be completely eliminated by adjusting drop link length and swaybar performance optimized.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271006
The product you are viewing cross references to these numbers
Sold as a pair - 1 pair req'd per car
✓ Maintenance-free precision rod ends
✓ Weather-sealed
✓ Direct Bolt-on replacement
Fits:
Porsche 993 Carrera 2
Porsche 993 Carrera 4
Porsche 993 Carrera 2S
Porsche 993 Carrera 4S
Porsches 993 turbo
Standard or Sports Suspension (M030)
The ideal swaybar (anti roll bar) is completely unloaded at static ride height. Stock drops links almost always preload the swaybar since the car doesn't sit perfectly level due to asymmetries such as driver weight.Our front and rear adjustable-length drop links for C4/C2 allow you to eliminate preload of the swaybar for maximum performance.
A preloaded swaybar shifts the weight carried by each of the tires, increasing grip on weighted tires at the expense of decreasing grip on un-weighted tyres. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tire locks up first. Preload can be completely eliminated by adjusting drop link length and swaybar performance optimized.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271006
2271006
99333307301
99333307303
99333307302
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) TURBO S 1994-97
£276.00
Now £270.48
In stock
Adjustable upper control arm kit. Porsche 993 1994 to 1998
Code: 2180035
Adjustable upper control arm kit.
4 pcs in kit - 1 kit required per car
Fits
Porsche 993 - All 1994 - 1998
Adjustable Upper Control Arm set replaces the stock upper wishbone (KT) and camber arms.
Adjustable length makes it easy to achieve aggressive camber settings.
These have spherical bearings in place of the compliant factory rubber bushings for increased precision and control. The bearings are fully weather sealed to keep out dirt, water and contaminants that wear out unprotected bearings.
Machined from aluminum billet, the are arms are attractive and sturdy.
Sold as a set of 4 and includes 2 each KT and camber arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180035
The product you are viewing cross references to these numbers
4 pcs in kit - 1 kit required per car
Fits
Porsche 993 - All 1994 - 1998
Adjustable Upper Control Arm set replaces the stock upper wishbone (KT) and camber arms.
Adjustable length makes it easy to achieve aggressive camber settings.
These have spherical bearings in place of the compliant factory rubber bushings for increased precision and control. The bearings are fully weather sealed to keep out dirt, water and contaminants that wear out unprotected bearings.
Machined from aluminum billet, the are arms are attractive and sturdy.
Sold as a set of 4 and includes 2 each KT and camber arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180035
2180035
99333104502
99333104503
99333104570
99333104580
99333104703
99333104700
99333104702
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£1,650.00
Now £1,617.00
Orderable
Rear suspension side section bushing kit. Porsche 993 1994 to 1998
Code: 229001
Rear suspension side section bushing kit.
4 pcs in kit - 2 kits required per car
Fits
Porsche 993 - All 1994 - 1998
Replaces the rubber bushings on the rear 993 side panels.
Stock hardness – Restores performance and ride quality to original.
Sport-hardness – Firmer rubber more precisely locates suspension members under load, without the noise and vibration associated with solid metal alternatives.
Each side panel has 4 rubber bushings, for a total of 8 bushings per car.
Each kit includes 4 bushings, order 2 kits per car
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
229001
The product you are viewing cross references to these numbers
4 pcs in kit - 2 kits required per car
Fits
Porsche 993 - All 1994 - 1998
Replaces the rubber bushings on the rear 993 side panels.
Stock hardness – Restores performance and ride quality to original.
Sport-hardness – Firmer rubber more precisely locates suspension members under load, without the noise and vibration associated with solid metal alternatives.
Each side panel has 4 rubber bushings, for a total of 8 bushings per car.
Each kit includes 4 bushings, order 2 kits per car
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
229001
2290016
2290017
99333105100
99333105200
99333105180
99333105280
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Prices from: £441.00
Rear track control arm eccentric bushings. Porsche 993/986/987/996/997
Code: 2290032
Rear track control arm eccentric bushings.
1 kit required per car
Fits
Porsche 993 - All 1995 to 1998
Porsche 986 and 987 - 1999 to 2012
Porsche 996 and 997 - 1999 to 2012
Running out of rear toe adjustment range is a common problem on lowered cars. The bore on these bushings is offset by 6mm effectively shortening or lengthening the length of the toe link and bringing the toe adjustment back into range.
Decrease toe in
Position the eccentric to decrease toe arm length by 6mm. This solves a common problem with lowered cars that have too much toe in but not enough toe adjustment range to correct the issue.
Increase toe in
Position the eccentric to increase toe arm length by 6mm. Cars with a lot of negative camber can have too much toe out but not enough range of toe adjustment to bring it back to range.
Sport hardness rubber improves performance by reducing compression under heavy loads while providing the same noise damping quality of the stock rubber.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2290032
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 993 - All 1995 to 1998
Porsche 986 and 987 - 1999 to 2012
Porsche 996 and 997 - 1999 to 2012
Running out of rear toe adjustment range is a common problem on lowered cars. The bore on these bushings is offset by 6mm effectively shortening or lengthening the length of the toe link and bringing the toe adjustment back into range.
Decrease toe in
Position the eccentric to decrease toe arm length by 6mm. This solves a common problem with lowered cars that have too much toe in but not enough toe adjustment range to correct the issue.
Increase toe in
Position the eccentric to increase toe arm length by 6mm. Cars with a lot of negative camber can have too much toe out but not enough range of toe adjustment to bring it back to range.
Sport hardness rubber improves performance by reducing compression under heavy loads while providing the same noise damping quality of the stock rubber.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2290032
2290032
99333104300
99333104301
99633104506
99733104505
99633104507
99633104508
99633104512
99733104504
99733104505
99631124508
99633124510
99633104505
99633104507
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
£220.00
Now £215.60
Orderable
Eccentric bolt adjuster locking kit. Porsche 993
Code: 2180019
Eccentric adjuster locking kit.
6pcs in kit - 1 kit required per car
Fits
Porsche 993 - All
Prevent Alignment Settings From Slipping
Losing on the track is bad enough, but losing the alignment on the track is even worse. Prevent your eccentric adjuster bolts from slipping under heavy cornering loads with our Eccentric Adjuster Locking Kit.
Complete kit includes four lockout plates. Two plates are used to lock the rear toe adjusters and two plates to lock the camber settings.
Retain convenience and functionality of the eccentric adjuster. The original functionality of the adjuster is completely preserved. The plate can be set in any position.
Retain full range of the adjuster. These lockout plates do not limit adjustment range in any way, maximum toe and negative camber can be achieved with these plates in place.
Works with OEM fixed length arms and our adjustable length control arms as well.The unique design features a slotted hole that counters the slot provided for the adjuster. The plate can be moved up and down to reach any camber or toe setting desirable.
The Locking plates function by increasing the friction that holds the factory eccentric adjusters in place. These plates are guaranteed to prevent any adjuster slip even under aggressive driving conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180019
The product you are viewing cross references to these numbers
6pcs in kit - 1 kit required per car
Fits
Porsche 993 - All
Prevent Alignment Settings From Slipping
Losing on the track is bad enough, but losing the alignment on the track is even worse. Prevent your eccentric adjuster bolts from slipping under heavy cornering loads with our Eccentric Adjuster Locking Kit.
Complete kit includes four lockout plates. Two plates are used to lock the rear toe adjusters and two plates to lock the camber settings.
Retain convenience and functionality of the eccentric adjuster. The original functionality of the adjuster is completely preserved. The plate can be set in any position.
Retain full range of the adjuster. These lockout plates do not limit adjustment range in any way, maximum toe and negative camber can be achieved with these plates in place.
Works with OEM fixed length arms and our adjustable length control arms as well.The unique design features a slotted hole that counters the slot provided for the adjuster. The plate can be moved up and down to reach any camber or toe setting desirable.
The Locking plates function by increasing the friction that holds the factory eccentric adjusters in place. These plates are guaranteed to prevent any adjuster slip even under aggressive driving conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180019
2180019
99333121700
99733121702
PAF007648
99633121900
99333121980
99333121981
99333121701
99333121901
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£150.00
Now £147.00
Orderable
Rear upright wheel carrier bushing tool. Porsche 991 and 991 Turbo
Code: 226001
Rear upright wheel carrier bushing tool.
1 x tool required per application
Fits
Porsche 991 - Rear
Porsche 991 Turbo - Rear
Simplify the installation process of Monoball products and replacement bushings.
Our two piece cup and piston tools allow for simple bushing extraction and insertion without removal of the wheel carriers or control arms. No need to use a shop press. The tools are designed to precisely fit the bushing circumference, preventing accidental damage to the bushing and ensuring proper installation.
We have tools for the LCA central bushings, the rear upright LCA bushings, and the rear upright shock mount bushings.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
226001
The product you are viewing cross references to these numbers
1 x tool required per application
Fits
Porsche 991 - Rear
Porsche 991 Turbo - Rear
Simplify the installation process of Monoball products and replacement bushings.
Our two piece cup and piston tools allow for simple bushing extraction and insertion without removal of the wheel carriers or control arms. No need to use a shop press. The tools are designed to precisely fit the bushing circumference, preventing accidental damage to the bushing and ensuring proper installation.
We have tools for the LCA central bushings, the rear upright LCA bushings, and the rear upright shock mount bushings.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
226001
2180017
2180018
99133111103
99133111104
99133111203
99133111204
99133104303
9P1505223B
99133104420
99133104403
9P1505224B
99133104320
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
Prices from: £83.30
Rear wheel carrier concentric monoball kit. Porsche 991 and 991 Turbo 2012 onwards
Code: 2260011
Rear wheel carrier concentric monoball kit.
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Monoball Cartridges replace factory rear wheel carrier bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.
High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Weather Sealed
Monoball housing and spacers are hard anodized for protection. Our proprietary rubber seals keep the precision bearing from road contaminates for extended life of the product.
The kit includes two monoball bearings… one for each rear wheel carrier
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260011
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Monoball Cartridges replace factory rear wheel carrier bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.
High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Weather Sealed
Monoball housing and spacers are hard anodized for protection. Our proprietary rubber seals keep the precision bearing from road contaminates for extended life of the product.
The kit includes two monoball bearings… one for each rear wheel carrier
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260011
2260011
99133105302
9P1505311
99133105310
99133105321
99133111112
99133111113
99133111212
99133161112
99133111103
99133111104
99133111203
99133111204
99133111205
9913311105
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£350.00
Now £343.00
In stock
Rear lower wishbone eccentric monoball kit. Porsche 991 and 991 Turbo 2012 onwards
Code: 2260008
Rear lower wishbone eccentric monoball kit.
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Our Eccentric Lower Wishbone Monoball Cartridges replace inner rubber bushings with spherical bearings, providing low friction and precisely holding camber settings.
The eccentric design allows increasing or decreasing rear camber, as needed.
Increasing Camber – Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.
Decreasing Camber – Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive.
Made from hardened steel, plated and weather-sealed, these bearings are made to last. Fits the front or rear stock and GT3 type control arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260008
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Our Eccentric Lower Wishbone Monoball Cartridges replace inner rubber bushings with spherical bearings, providing low friction and precisely holding camber settings.
The eccentric design allows increasing or decreasing rear camber, as needed.
Increasing Camber – Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.
Decreasing Camber – Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive.
Made from hardened steel, plated and weather-sealed, these bearings are made to last. Fits the front or rear stock and GT3 type control arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260008
2260008
99133105302
9P1505311
99133105310
99133105321
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£510.00
Now £499.80
Orderable
Rear lower control arm concentric monoball kit. Porsche 991 and 991 Turbo 2012 onwards
Code: 2260009
Rear lower control arm concentric monoball kit.
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Monoball Cartridges replace factory rubber bushings with hardened-steel spherical bearings.
Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.
High tolerance machined housing allow for simple press fit installation.
Correct spacers ensure proper fitment.
Weather Sealed
Monoball housing and spacers are hard anodized for protection. Our proprietary rubber seals keep the precision bearing from road contaminates for extended life of the product.
The kit includes 4 monoball bearings. two for each lower control arm. Order one kit per car
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260009
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Monoball Cartridges replace factory rubber bushings with hardened-steel spherical bearings.
Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.
High tolerance machined housing allow for simple press fit installation.
Correct spacers ensure proper fitment.
Weather Sealed
Monoball housing and spacers are hard anodized for protection. Our proprietary rubber seals keep the precision bearing from road contaminates for extended life of the product.
The kit includes 4 monoball bearings. two for each lower control arm. Order one kit per car
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260009
2260009
99133104303
9P1505223B
99133104420
99133104403
9P1505224B
99133104320
9P1505223
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£715.00
Now £700.70
Orderable
Upper control arms concentric monoball kit. Porsche 991 2012 onwards
Code: 2260007
Rear track rod concentric monoballl kit.
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
These monoball cartridges replace factory rear upper control arm bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Weather Sealed
Monoball housing and spacers are hard anodized for protection. Our proprietary rubber seals keep the precision bearing from road contaminates for extended life of the product.
The kit includes 8 monoball bearings. 2 per arm, for 4 arms total.
Order one kit per car.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260007
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
These monoball cartridges replace factory rear upper control arm bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Weather Sealed
Monoball housing and spacers are hard anodized for protection. Our proprietary rubber seals keep the precision bearing from road contaminates for extended life of the product.
The kit includes 8 monoball bearings. 2 per arm, for 4 arms total.
Order one kit per car.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260007
2260007
99133104503
9P1501529
99133104520
99133104703
9P1505397A
9P1505397
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
£1,400.00
Now £1,372.00
Orderable
Rear track rod concentric monoballl kit. Porsche 991 and 991 Turbo 2012 onwards
Code: 2260015
Rear track rod concentric monoballl kit.
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Monoball Cartridges replace factory rear track rod bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.
High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out.
These bearings are made to last.
The kit includes 4 monoball bearings. 2 bearings per arm, for both track rods.
Order one kit per car
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260015
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Monoball Cartridges replace factory rear track rod bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.
High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out.
These bearings are made to last.
The kit includes 4 monoball bearings. 2 bearings per arm, for both track rods.
Order one kit per car
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260015
2260015
99133106104
9P1505237B
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£747.00
Now £732.06
Orderable
Rear track rod eccentric monoballl kit. Porsche 991 and 991 Turbo 2012 onwards
Code: 2260013
Rear track rod eccentric monoballl kit.
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
This monoball cartridge kit replace the inner and outer track rod bushings.
The inner Eccentric bearings provide increased range of toe adjustment. This is to compensate for increased camber or lowered car that cannot be brought into toe range. The outer concentric bearing replaces the rubber bushing and eliminates deflection due to rubber compression.
Increasing Camber – Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.
Decreasing Camber – Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive.
Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out. These bearings are made to last.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260013
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
This monoball cartridge kit replace the inner and outer track rod bushings.
The inner Eccentric bearings provide increased range of toe adjustment. This is to compensate for increased camber or lowered car that cannot be brought into toe range. The outer concentric bearing replaces the rubber bushing and eliminates deflection due to rubber compression.
Increasing Camber – Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.
Decreasing Camber – Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive.
Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out. These bearings are made to last.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260013
2260013
99133106104
9P1505237B
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£690.00
Now £676.20
Orderable
Rear shock absorber lower mount monoball kit. Porsche 991 2012 onwards
Code: 2260016
Rear shock absorber lower mount monoball kit.
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
These monoball cartridges replace factory rear shock lower mount bushings with hardened-steel spherical bearings.
The factory rubber acts as a spring in series with the shock. This rubber spring-action is completely un-damped and reduces the shock ability to control the tire contact patch. The spherical bearing allows the damper to do its job and control the contact patch.
High tolerance machined housing allow for simple press fit installation.
The kit includes 2 monoball bearings. 1 per side and inserts into the rear upright.
Order one kit per car
Weather Sealed
Monoball housing and spacers are hard anodized to protect from corrosion. Rubber seals keep the precision bearing from road contaminates for extended life of the product.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260016
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
These monoball cartridges replace factory rear shock lower mount bushings with hardened-steel spherical bearings.
The factory rubber acts as a spring in series with the shock. This rubber spring-action is completely un-damped and reduces the shock ability to control the tire contact patch. The spherical bearing allows the damper to do its job and control the contact patch.
High tolerance machined housing allow for simple press fit installation.
The kit includes 2 monoball bearings. 1 per side and inserts into the rear upright.
Order one kit per car
Weather Sealed
Monoball housing and spacers are hard anodized to protect from corrosion. Rubber seals keep the precision bearing from road contaminates for extended life of the product.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260016
2260016
99133111103
99133111104
99133111203
99133111204
99133111205
99133111105
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£330.00
Now £323.40
Orderable
Adjustable rear lower wishbone. Porsche 991 2012 onwards
Code: 2180012
Pair of adjustable rear lower wishbones.
1 pair required per car
Fits
Porsche 991 2012 Onward - Rear Only
We've developed 991 Rear Adjustable Wishbone to provide the camber and precision you need. Machined from billet aluminum, hard anodized and fully weather sealed, this arms are strong enough for track and durable enough for extended street use.
Easy Camber Adjustment – The double adjuster makes fast and precise camber changes in minutes. Dialing in your race car, or adding camber for the occasional track day is now a simple operation.
Camber Range – Extended range of adjustment lets you get aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.
Porsche 991 adjustable rear lower wishbone detail
Heim Joint – Eliminate suspension deflection associated with rubber compression. For superior driving precision, spherical bearing type heim joints are used instead of the rubber bushings that are found in OEM control arms. The arms are fully rebuildable with replaceable heim joints.
Fully Weather Sealed – Rubber boot protects the heim joint to keep water and contaminant out for extended life.
The kit includes both rear lower wishbones. Order one kit per car
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180012
The product you are viewing cross references to these numbers
1 pair required per car
Fits
Porsche 991 2012 Onward - Rear Only
We've developed 991 Rear Adjustable Wishbone to provide the camber and precision you need. Machined from billet aluminum, hard anodized and fully weather sealed, this arms are strong enough for track and durable enough for extended street use.
Easy Camber Adjustment – The double adjuster makes fast and precise camber changes in minutes. Dialing in your race car, or adding camber for the occasional track day is now a simple operation.
Camber Range – Extended range of adjustment lets you get aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.
Porsche 991 adjustable rear lower wishbone detail
Heim Joint – Eliminate suspension deflection associated with rubber compression. For superior driving precision, spherical bearing type heim joints are used instead of the rubber bushings that are found in OEM control arms. The arms are fully rebuildable with replaceable heim joints.
Fully Weather Sealed – Rubber boot protects the heim joint to keep water and contaminant out for extended life.
The kit includes both rear lower wishbones. Order one kit per car
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180012
2180012
99133105302
9P1505311
99133105310
99133105321
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£1,200.00
Now £1,176.00
Orderable
Adjustable front caster arms with anti-dive / anti-squat. Porsche 981 / 991
Code: 2180032
Adjustable front caster arms with anti-dive / anti-squat.
1 kit required per car
Fits:
Porsche 981 Boxster - Front Only
Porsche 981 Cayman - Front Only
Porsche 991 - Front Only
You have to exchange the control arm central bush to accommodate the fork arm. (bought separately)
Elephant Racing caster arms provide adjustable caster and anti-dive ability when used on the front
Front Suspension
Threaded double-adjuster makes it easy to extend or shorten the arm.
This makes for easy caster adjustment – an important adjustment the factory left out. A must-have for cars with GT3 style extendable style lower control arms to correct for un-intended caster increase that is caused by the extended LCAs.
Anti-dive behavior can also be adjusted. Lowering the front of the arm using the provided spacers reduces front dive under braking. Adjustable in 2mm increments.
Fully weather sealed – Proper boots at the heim joint keep water and contaminant out for extended life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180032
The product you are viewing cross references to these numbers
1 kit required per car
Fits:
Porsche 981 Boxster - Front Only
Porsche 981 Cayman - Front Only
Porsche 991 - Front Only
You have to exchange the control arm central bush to accommodate the fork arm. (bought separately)
Elephant Racing caster arms provide adjustable caster and anti-dive ability when used on the front
Front Suspension
Threaded double-adjuster makes it easy to extend or shorten the arm.
This makes for easy caster adjustment – an important adjustment the factory left out. A must-have for cars with GT3 style extendable style lower control arms to correct for un-intended caster increase that is caused by the extended LCAs.
Anti-dive behavior can also be adjusted. Lowering the front of the arm using the provided spacers reduces front dive under braking. Adjustable in 2mm increments.
Fully weather sealed – Proper boots at the heim joint keep water and contaminant out for extended life.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180032
2180032
99134104301
99134104305
99134104302
99134104306
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
£715.00
Now £700.70
Orderable
Strut top mount monoball cartridge. Porsche 986/987/996/997
Code: 2011002
Strut top mount monoball cartridge.
1 kit required per axle
Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster - Front and Rear
Porsche 987 Cayman - Front and Rear
Porsche 996 - Front Only
Porsche 997 - Front Only
Cartridges install easily to replace rubber bushings for 996/997/Boxster/Cayman. An excellent alternative to our QuickChange Camber Plates for cars that don't need more camber but still want the handling precision of a spherical bearing monoball. Spherical bearings improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings.
Eliminating Deflection Is Important For Two Reasons
• The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
• The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2011002
The product you are viewing cross references to these numbers
1 kit required per axle
Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster - Front and Rear
Porsche 987 Cayman - Front and Rear
Porsche 996 - Front Only
Porsche 997 - Front Only
Cartridges install easily to replace rubber bushings for 996/997/Boxster/Cayman. An excellent alternative to our QuickChange Camber Plates for cars that don't need more camber but still want the handling precision of a spherical bearing monoball. Spherical bearings improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings.
Eliminating Deflection Is Important For Two Reasons
• The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
• The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2011002
2011002
99634301804
99734301801
99734301800
99734301801
99634398008
99634398037
98633305903
98733305900
98633305904
98733305900
98633305906
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
£390.00
Now £382.20
Orderable
Lower control arm eccentric monoballs. Porsche 986/987/996/997/981/718/991
Code: 2260006
Lower control arm eccentric monoballs.
1 kit required per axle
Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 - Front and Rear
Porsche 718 - Front and Rear
Porsche 991 - Front Only
Our Eccentric Control Arm Monoball Cartridges replace inner rubber bushings with spherical bearings, providing low friction and precisely holding camber settings.
The eccentric design allows increasing or decreasing camber, as needed.
Increasing Camber
Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the 996/997 rear suspension, about .36 degree of negative camber on the Boxster rear suspension, and .39 degrees on the 996/997/Boxster front suspension.
Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.
Decreasing Camber
Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive & front camber about .39 degrees positive for 996/997 while Boxsters will get about .39 degrees positive front and .36 degrees positive rear.
Made from hardened steel, plated and weather-sealed, these bearings are made to last. Fits the front or rear stock and GT3 type control arms.
Sized to fit factory original control arms. Not compatible with some aftermarket replacement control arms that use a larger non-stock size bushing.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260006
The product you are viewing cross references to these numbers
1 kit required per axle
Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 - Front and Rear
Porsche 718 - Front and Rear
Porsche 991 - Front Only
Our Eccentric Control Arm Monoball Cartridges replace inner rubber bushings with spherical bearings, providing low friction and precisely holding camber settings.
The eccentric design allows increasing or decreasing camber, as needed.
Increasing Camber
Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the 996/997 rear suspension, about .36 degree of negative camber on the Boxster rear suspension, and .39 degrees on the 996/997/Boxster front suspension.
Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.
Decreasing Camber
Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive & front camber about .39 degrees positive for 996/997 while Boxsters will get about .39 degrees positive front and .36 degrees positive rear.
Made from hardened steel, plated and weather-sealed, these bearings are made to last. Fits the front or rear stock and GT3 type control arms.
Sized to fit factory original control arms. Not compatible with some aftermarket replacement control arms that use a larger non-stock size bushing.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260006
2260006
99134105301
99134105303
99134105304
99134105302
99134105321
99634105306
99634105319
99634105307
99634105316
99634105317
99734105300
99734105303
99734105304
99734105306
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp)
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp)
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
£390.00
Now £382.20
Orderable
Spherical bearing inner GT3 monoballs. Porsche 986/987/996/997/981/718/991
Code: 2180030
Spherical bearing inner GT3 monoballs for factory GT3 lower arm.
1 kit required per axle
Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 - Front and Rear
Porsche 718 - Front and Rear
Porsche 991 - Front Only
Porsche 992 - Front Only
* Not For '12+ 991, 992 GT3/GT4
GT3 Street Inner Spherical Bearing Module
Unlike the factory rubber bushed GT3 inner control arms, our spherical bearings do not deflect under load.
They are fully weather sealed to keep out water and grit for extended life.
• Use in combination with factory GT3 street type control arm only
• Does not fit 991 GT3 or GT4 arms
• Easy Bolt-On
• Weather-sealed
• Sold as pair
• Front and Rear for 996, 997, 986, 987, 981, 718
• Front only on 991
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180030
The product you are viewing cross references to these numbers
1 kit required per axle
Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 - Front and Rear
Porsche 718 - Front and Rear
Porsche 991 - Front Only
Porsche 992 - Front Only
* Not For '12+ 991, 992 GT3/GT4
GT3 Street Inner Spherical Bearing Module
Unlike the factory rubber bushed GT3 inner control arms, our spherical bearings do not deflect under load.
They are fully weather sealed to keep out water and grit for extended life.
• Use in combination with factory GT3 street type control arm only
• Does not fit 991 GT3 or GT4 arms
• Easy Bolt-On
• Weather-sealed
• Sold as pair
• Front and Rear for 996, 997, 986, 987, 981, 718
• Front only on 991
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180030
2180030
99634144190
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp)
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp)
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
£340.00
Now £333.20
Orderable
Litronic bracket for adjustable control arms. Porsche 996/997/991/986/987/981
Code: 218002
Litronic Bracket for adjustable control arms.
Fits
Porsche 987 - Rear with Litronic headlights
Porsche 981 - Rear with Litronic headlights
Price is for 1 and 2 Required per axle
This bracket is required for cars that are originally equipped with the Litronic headlights. This adapter bracket attaches to the headlight angle sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
218002
The product you are viewing cross references to these numbers
Fits
Porsche 987 - Rear with Litronic headlights
Porsche 981 - Rear with Litronic headlights
Price is for 1 and 2 Required per axle
This bracket is required for cars that are originally equipped with the Litronic headlights. This adapter bracket attaches to the headlight angle sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
218002
2180028
99634151101
99634151102
99634137103
2180029
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Prices from: £58.80
Litronic bracket for adjustable control arms. Porsche 996/997/991/986/987/981
Code: 2180009
Litronic Bracket for adjustable control arms.
Fits
Porsche 996 - Front & Rear with Litronic headlights
Porsche 997 - Front & Rear with Litronic headlights
Porsche 991 - Front & Rear with Litronic headlights
Porsche 986 - Front Only with Litronic headlights
Porsche 987 - Front Only with Litronic headlights
Porsche 981 - Front Only with Litronic headlights,
Price is for 1 and 2 Required per axle
This bracket is required for cars that are originally equipped with the Litronic headlights. This adapter bracket attaches to the headlight angle sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180009
The product you are viewing cross references to these numbers
Fits
Porsche 996 - Front & Rear with Litronic headlights
Porsche 997 - Front & Rear with Litronic headlights
Porsche 991 - Front & Rear with Litronic headlights
Porsche 986 - Front Only with Litronic headlights
Porsche 987 - Front Only with Litronic headlights
Porsche 981 - Front Only with Litronic headlights,
Price is for 1 and 2 Required per axle
This bracket is required for cars that are originally equipped with the Litronic headlights. This adapter bracket attaches to the headlight angle sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180009
2180009
99634137103
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
£50.00
Now £49.00
Orderable
