Retro Trim

Door bins SET OF 2 with carpet.
Black Carpet with edge.

Careful measurement and lining up with the door handle and door pull is essential, before creating mounting holes as they may not mount in exactly the same holes as the original pockets.



Fits:
Porsche 911 1974-89
Porsche 964 1989-94

Bag for Cabriolet Hood Tonneau Cover.


Delivery Time is Normally 14 - 21 working days on this product

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911561100BAG

The product you are viewing cross references to these numbers

Complete rear restoration kit for the 2 rear seats of Porsche 911 and 964 models 1974-1993, available for Coupe, Targa and Cabriolet models, in leather or leatherette.

Our rear seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your rear seats back to factory new condition; 2 back rest covers, 2 seat base covers, 2 bolster cover pairs and correction foam for seat base.

We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new horsehair. New horsehair or rear bolster cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Because of fading of the original material and colour differences between dye lots, we offer the rear seat restoration kit in Black and selected colors only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Delivery Time is Normally 3-4 weeks on this product as this is made to order

Door Bins SET of 2 Without Carpet Porsche 911 / 964
these can be given to your interior trimmer to cover in leather or carpet.



Fits:
Porsche 911 1974-89
Porsche 964 1989-94

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155503000

The product you are viewing cross references to these numbers

Rear Back wall Panel (Parcel shelf).

Fits:
Porsche 911 1972-76 Targa / Coupe

Complete ready-to-install back wall panel (parcel shelf / rear bulkhead lining) for Porsche 911 models 1972–1976. Available for Coupe and Targa models in Black Porsche Nappa leather or Porsche Vinyl with profile bar as original.

Our rear bulkhead panel is among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; preformed water-resistant backing boards, profile bars, installation clips, vibration deadening foam. The panels are trimmed with top quality Scottish hides or original specification leatherette as required. All panels are precision cut, riveted, stapled, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear bulkhead panel in Black only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155507500

The product you are viewing cross references to these numbers

Rear Backwall Panel (Parcelshelf).

Fits:
Porsche 911 1967-71 Targa

Complete ready-to-install rear backwall panel (parcelshelf / rear bulkhead lining) for Porsche 911 Targa models 1967–1971. Available for "soft window" and "glass window" models in Black Porsche Nappa leather or Porsche classic vinyl.

Our rear bulkhead panel is among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; preformed water-resistant backing boards, profile strips, installation clips, vibration deadening foam. We use top quality Scottish hides or original specification leatherette as required. All panels are precision cut, riveted, stapled, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear bulkhead panel in Black only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155507541

The product you are viewing cross references to these numbers

Rear Backwall Panel (Parcelshelf).

Fits:
Porsche 911 1965-71 Coupe

Complete ready-to-install rear backwall panel (parcelshelf / rear bulkhead lining) for Porsche 911 Coupe models 1965–1971 with metal profile bar as original.Available in Black Porsche Napp a leather or Porsche classic vinyl.

Our rear bulkhead panel is among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; water-resistant backing boards, metal profile bar, installation clips, vibration deadening foam. We use top quality Scottish hides or original specification leatherette as required. All panels are precision cut, riveted, stapled, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear bulkhead panel in Black only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155507522

The product you are viewing cross references to these numbers

Rear 1/4 Inner door top strip Vinyl.
Sold as each side



Fits:
Porsche 911 1972-89 COUPE Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155509

The product you are viewing cross references to these numbers

Complete, new and original cabriolet boot cover for your Porsche 993/ 911 cabriolet from 1994 through 1998. This is a gorgeous, OEM specification Porsche part available in dark blue and black, complete with the original bag.

Our cabriolet boot cover is probably the best you can buy for completeness, originality and fit. We use the original German materials; top grade "Sonnenland Classic" canvas and colour coded edge-binding canvas both from the original supplier, high resistance yarns and all original "Dot" and "Tenax" fasteners and fittings. Even the heavy gauge vinyl and "Velcro" used for the manufacturing the bag exactly match Stüttgart factory specifications. All materials are precision cut, pressure glued, form-stitched and edge bound to guarantee a factory authentic fit.

If you currently drive your Porsche without a boot cover, be aware that you may be damaging your convertible top. These cars were factory delivered with the boot cover to ensure the webbing structure inside the convertible top is protected under high speed, top-down driving. Furthermore, nothing beats the boot cover to accentuate the sex appeal of your curvaceous cabriolet.

To ensure that our boot cover will fit perfectly on both original and replaced soft tops, TENAX fasteners are delivered with the cover but not pre-installed.

Delivery Time is Normally 14 - 21 working days on this product

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

993561100

The product you are viewing cross references to these numbers

Passenger (wood material) floorboard for Porsche 911 Targa models from 1969–1983 with LHD. This a beautiful OEM specification board in laminated birchwood. Identical to Porsche part nr. 90155106442.

This pedal floor board is made from laminated birchwood just like the original. All openings and edges are CNC finished to guarantee a factory authentic fit and finish.

Available for LHD cars only.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155106442

The product you are viewing cross references to these numbers

RS or RS replica models Manufactured specifically 20-piece carpet set in OEM Sliverknit.

Upon request this carpet set can be finished in contrasting edge binding.

The set contains 19 pieces for Coupe models
This is a wonderful OEM specification Porsche part in original Sliverknit, available in most original colours: Black, Gray, Dark Blue, Dark Brown, Burgundy (Dark Red), Cork (Orange Tan) and Caramel (Light Tan). We guarantee a factory authentic fit.

To view pictures for the colour options please CLICK HERE

Please note: We offer samples of all carpets we have listed. Please ask our office to post it to you before you place the order if you are not 100% sure which colour to get. No returns will be accepted for the colour miss match.

Our hand crafted carpet sets are probably the best you can buy for completeness, originality and fit. We match Stüttgart factory specifications step by step: orginal Porsche Sliverknit velour, reinforced and rubber coated jute backing material for all floor pieces, right down to edge binding, buttons, heel padding and integrated reinforcement in all the original places.

The set comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the DIY home mechanic.

For Installation Instructions CLICK HERE

Delivery Time is Normally 3-4 weeks on this product as this is made to order

Interior Restoration Kit for Porsche 911 Coupe 1974–1989.

Our Standard Interior Restoration Kit for the Porsche 911 Coupe (3.0 SC '77-'83 and Carrera 3.2 '84-'89
models) includes everything you typically need to bring your interior back to factory new condition:

• Complete Carpet Set, OEM sliverknit, (19/21 pieces, Diagram ref 1)
• Door Panels, Ready-To-Install, pair (Diagram ref. 2)
• Leather Front Seat Restoration Kit, pair (standard/sports, Diagram ref. 4)
• Leather Rear Seat Restoration Kit, pair (Diagram ref. 5)
• Trunk Carpet set in OEM Perlon felt or Sliverknit (Not indicated)
• Rear Bulkhead Retrim Kit (Diagram ref. 6)
• Rear quarter Panel Retrim Kit, pair (Diagram ref. 7)
• Leather gearstick Gaiter/ shift boot (Carrera 3.2 only, Diagram ref. 8)
• B-pillar Retrim Kit, pair (Diagram ref. 9)
• Headlining Kit (Not indicated)
• Additional Leather, 1m²
• Complete step-by-step installation instructions and pictures

Following parts are not included in the standard kit, but can be ordered additionally (for beltline retrimming and full leather interiors):

• Leather Dashboard Retrim Kit

• Leather Door Cap Retrims (pair) front (Diagram ref. 3)

• Leather Rear quarter upper Retrims (pair) rear (Diagram ref. 3)

• Leather Knee Protector Retrim Kit (3 pieces)

• Leather Armrest and Door Pocket Cover Retrim kit with ‘signature’ topstitching

Following parts are not included in the standard kit (can be ordered separately):

• Complete New Door Pockets, pair (OEM specification)

• Complete New Dashboard (OEM specification)

• Complete New Knee Protectors (3 pieces)

• Complete New Door Caps (pair)

• Complete New Rear Backwall / Parcelshelf

• Complete New Rear Quarter Panels

• Replacement Seat Base Foams (pair)

• A-pillar Retrim Kit

• Roll Bar Retrim kit incl. vents (Targa)

For more information: CLICK HERE

For Installation Instructions. Interior carpet set Porsche 1969-89 CLICK HERE

For Installation Instructions. Targa Top Restoration Kit Porsche 911 1965-1993 CLICK HERE

For Installation Instructions. Seat Kit Porsche 911 1974-93 CLICK HERE

For Installation Instructions. B-Post retrim Porsche 911 – all models CLICK HERE

Pedal floor board.

Pedal section backing board for all Porsche 911 models from 1974–1989 with manual transmission. This a beautiful OEM specification board in laminated birchwood.

Available for Targa, Cabrio and Coupe models. Identical to Porsche part nr. 911.551.063.44 (Targa / Cabrio) and 911.551.063.03 / 911.551.063.04 (Coupe).

Available for LHD cars with manual transmission only.

This pedal floor board is made from form-pressed laminated birchwood just like the original. The boards are glued in multiple layers after which they are pressure molded and bent into the exact angle. All openings and edges are CNC finished to guarantee a factory authentic fit and finish.

To install, simply transfer the accelerator and clutch stop from your old board.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911551063

The product you are viewing cross references to these numbers

Pedal floor board.

Pedal section backing board for all Porsche 911 models from 1965–1973 with manual transmission. This a beautiful OEM specification board in laminated birchwood.

Available for Targa and Coupe models. Identical to Porsche part nr. 901.551.063.41 / 901.551.063.42 (Targa) and 901.551.063.21 / 901.551.063.23 (Coupe).

Available for LHD cars with manual transmission only.

This pedal floor board is made from form-pressed laminated birchwood just like the original. The boards are glued in multiple layers after which they are pressure molded and bent into the exact angle. All openings and edges are CNC finished to guarantee a factory authentic fit and finish.

To install, simply transfer the accelerator and clutch stop from your old board.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

901551063

The product you are viewing cross references to these numbers

RS Door panel. Sold as a pair.
Made in black Vinyl / Leatherette material.



Fits:
Porsche 911 1974-89
Porsche 930 1975-89
Porsche 964 1989-94
Porsche 993 1994-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96455503X00

The product you are viewing cross references to these numbers

Dashboard cover set wood for LHD Cars.



Fits:
Porsche 911 1965-68 LHD Cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155204130

The product you are viewing cross references to these numbers

Wood Steering Wheel 42cm / 16.5"



Fits:
Porsche 911 1965-73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134708211

The product you are viewing cross references to these numbers

Fits Right Hand Drive cars - RHD

Retrim kit for the facings (midde section) of your dashboard in the original material for all Porsche 911 models 1969 - 1973. Available in black basketweave vinyl ('69-'71) and black plain vinyl ('72-'73) for both LHD and RHD cars.

The dashboard facings come with easy to follow installation instructions and pictures. Installation requires no specific tools and is simple to perform.

Suitable for dashboards with and without radio.

RS or RS replica models Manufactured specifically 20-piece carpet set in OEM Sliverknit.

Upon request this carpet set can be finished in contrasting edge binding.

Complete carpet set for Porsche 911/964 3.6 Targa, Coupe and Cabriolet, 1989 - 1993 (3.6 and 3.6 Turbo). The set contains 19 pieces for Targa/Coupe models and 24 pieces for the Cabriolet.
This is a wonderful OEM specification Porsche part in original Sliverknit, available in most original colours: Black, Gray, Dark Blue, Dark Brown, Burgundy (Dark Red), Cork (Orange Tan) and Caramel (Light Tan). We guarantee a factory authentic fit.

To view pictures for the colour options please CLICK HERE

Please note: We offer samples of all carpets we have listed. Please ask our office to post it to you before you place the order if you are not 100% sure which colour to get. No returns will be accepted for the colour miss match.

Our hand crafted carpet sets are probably the best you can buy for completeness, originality and fit. We match Stüttgart factory specifications step by step: orginal Porsche Sliverknit velour, reinforced and rubber coated jute backing material for all floor pieces, right down to edge binding, buttons, heel padding and integrated reinforcement in all the original places.

The set comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the DIY home mechanic.

For Installation Instructions CLICK HERE

Delivery Time is Normally 3-4 weeks on this product as this is made to order

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964556RS

The product you are viewing cross references to these numbers

Complete rear restoration kit for the 2 rear seats of Porsche 911 and 964 models 1974-1989, available for Coupe, Targa and Cabriolet models, in leather or leatherette.

Our rear seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your rear seats back to factory new condition; 2 back rest covers, 2 seat base covers, 2 bolster cover pairs and correction foam for seat base.

We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new horsehair. New horsehair or rear bolster cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Because of fading of the original material and colour differences between dye lots, we offer the rear seat restoration kit in Black and selected colors only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Complete leather restoration kit for the 2 rear seats of all Porsche 911 and 912 Coupe/Targa models 1966-1973. Available in Porsche Nappa leather or classic vinyl.

Our rear leather seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your rear seats back to factory new condition; 2 back rest covers, 2 seat base covers, 2 bolster cover pairs and correction foam for seat base.

We match Stuttgart factory specifications step by step; from the finest Porsche Nappa leather, colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new horsehair. New horsehair or rear bolster cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Because of fading of the original material and colour differences between dye lots, we offer the rear seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Delivery Time is Normally 3-4 weeks on this product as this is made to order

Soft window restoration kit for Porsche 911 Targa models 1967-1968. This is a gorgeous, OEM specification rear window section suitable for cars originally equipped with the soft window or conversions.

Our soft window restoration kit is among the best available for originality and fit. We use the original German materials that exactly match Stüttgart factory specifications; "Deep grain" vinyl, scratch resistant DOT approved window plastic, YKK heavy duty zippers and high resistance yarns. All materials are precision cut, pressure glued, form-stitched and edge bound to guarantee a factory authentic fit.

A lot of '67-'68 Targa models were converted to glass rear window in later years. Our kit can be used to convert cars back to soft window specification. Hardware needed for such conversion including handles, handle receivers, tensioning bows, seals and tenax buttons are not included in this kit.

The kit comes with step-by-step installation instructions and pictures. Installation requires no specific tools and is within the ability of a moderately experienced home mechanic.

Fits:
Porsche 911 1967-68

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90156500002

The product you are viewing cross references to these numbers

Dashboard Speaker Section LHD
(Strictly speaking these are for the 1968 models, but can be used 1964-68)




Fits:
Porsche 911 1964-68 LHD CARS ONLY
Porsche 912 1964-68 LHD CARS ONLY

Dashboard speaker section for Porsche 911, 1964 -1968 models with 2-piece dashboards. This is NOT a dashpad or dashcover but a new replacement speaker section for the dashboard, manufactured to exact OEM specifications. Matches Porsche part number 901.552.021.20 (or 901.552.021.21 for models after February '68).

Due to sun exposure '64-'68 dashboard speaker sections are typically faded, torn, warped or cracked. Dashboards in this state are beyond restoration. In this case we recommend to install our new OEM specification dashboard speaker section to finish your 100-point restoration.

Installation requires no specific tools and is within the ability of a moderately experienced home mechanic. Please note that installation of the dashboard requires removal of the windshield.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155203102

The product you are viewing cross references to these numbers

Dashboard Main Section LHD Porsche 911 1964-68 / 912 (Strictly speaking these are for the 1968 models, but can be used 1964-68)



Fits:

Porsche 911 1964-68 LHD CARS ONLY
Porsche 912 1964-68 LHD CARS ONLY

Complete dashboard main section for Porsche 911, 1964 -1968 models with 2-piece dashboards. This is NOT a dashpad or dashcover but a new replacement dashboard, manufactured to exact OEM specifications. Matches Porsche part number 901.552.031.23.

Please note that the forward speaker section of the dashboard, Porsche part number 901.552.021.20 (or 901.552.021.21 for models after February '68) is not included but available separately.

Due to sun exposure '64-'68 dashboards typically have large cracks in the middle. The underlying dashboard cellfoam has often disintegrated, the metal frame has deformed and dashboard mounting screws are rusted out. Dashboards in this state are beyond restoration. In this case we recommend to install our new OEM specification dashboard to finish your 100-point restoration.

Our complete OEM specification dashboards are probably the best you can buy for originality and fit. The tool to mould and cast the dashboards was developed using 3-D scanning on a NOS dashboard. Grain and gloss of the vynil surface coat have been optimised to match the typical patina found on the door caps and knee pads of '65-'68 models. All dashboards are quality assured on a jig to correct/control mounting points. We guarantee a factory authentic appearance and fit.

Installation requires no specific tools and is within the ability of a moderately experienced home mechanic. Please note that installation of the dashboard requires removal of the windshield.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155203101

The product you are viewing cross references to these numbers

Floor mats, Set of 2.
Black with white text on drivers side



Fits:
for RHD cars (right hand drive)
Porsche Boxster 987.1 2005-08
Porsche Boxster 987.2 2009-12

Complete leather restoration kit for the 2 front seats of all Porsche 911 models from 1985-1989 and all 964 models 1989-1993, available for Standard and Sport seats.

Our leather seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; from the finest Scottish hides with Porsche PoN perforation for the center sections, colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base bolsters. This allows you to correct the worn sides typically found on the driver's side seat bolster. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new cell foam. New seat base cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Upon completion of the auction, please state whether you have Standard or Sport seats. Sport seat have higher bolsters. The best way to distinguish is measure the side of the back rest. At the widest point, the Regular seat measures 12.5cm (5") whereas the Sport seat measures 17.5 cm (7").

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Sun Visors Kit Left and Right.
Set of 2 sun visors for Targa / Cabrio Models





Fits:
Porsche 911 1969-89 Targa / Cabrio
Porsche 964 Targa / Cabrio
*Please note these are aftermarket sets with the vanity on the right hand side, mainly used for LHD cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91173133001

The product you are viewing cross references to these numbers

Sun Visors Kit Left & Right.
Set of 2 sun visors for cars with Black Head lining





Fits:
Porsche 911 1969-89 COUPE
Porsche 964/ 993 COUPE
*Please note these are aftermarket sets with the vanity on the right hand side, mainly used for LHD cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91173133002

The product you are viewing cross references to these numbers

Sun Visors Kit Left & Right.
Set of 2 sun visors for cars with Cream Head lining





Fits:
Porsche 911 1969-89 COUPE
Porsche 964 / 993 COUPE
*Please note these are aftermarket sets with the vanity on the right hand side, mainly used for LHD cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91173133000

The product you are viewing cross references to these numbers

Complete front seat restoration kit for the 2 front seats of Porsche 911 1974-1976 (early G models) with standard seats.

Our front seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; original Porsch Nappa leather or classic Porsche Skai with period correct embossed center sections (dimple stripes), top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base bolsters. This allows you to correct the worn sides typically found on the driver's side seat bolster. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new cell foam. New seat base cell foams are not included as part of this kit.

Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Complete leather restoration kit for the 2 front seats of Porsche 911 models 1974-1984 with original Recaro sport seats (pre-SC models, Carrera 3.0, SC and early Turbo models).

The easiest way to distinguish a sport seat from a standard (comfort) seat is to measure the side of the back rest. At the widest point, the comfort seat measures 12.5cm (5") whereas the sport seat measures 17.5 cm (7").

Our leather seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; from the finest Scottish hides with Porsche PoN perforation for the center sections, top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base bolsters. This allows you to correct the worn sides typically found on the driver's side seat bolster. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new cell foam. New seat base cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is within the ability of the moderately experienced home mechanic.

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Complete leather restoration kit for the 2 front seats of Porsche 911 models 1977-1984 (late pre-SC models, Carrera 3.0, SC and early Carrera 3.2 models), available for Standard and Sport seats.

Our leather seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; from the finest Scottish hides with Porsche PoN perforation for the center sections, colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base bolsters. This allows you to correct the worn sides typically found on the driver's side seat bolster. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new cell foam. New seat base cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Please state whether you have Standard or Sport seats. Sport seat have higher bolsters. The best way to distinguish is to measure the side of the back rest. At the widest point, the Regular seat measures 12.5cm (5") whereas the Sport seat measures 17.5 cm (7").

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911521

The product you are viewing cross references to these numbers

Fits Left Hand Drive cars - LHD

Retrim kit for the facings (midde section) of your dashboard in the original material for all Porsche 911 models 1969 - 1973. Available in black basketweave vinyl ('69-'71) and black plain vinyl ('72-'73) for both LHD and RHD cars.

Installation requires no specific tools and is simple to perform.

Suitable for dashboards with and without radio.

Complete SET OF 4 door pockets for Porsche 911 '69-'73, re manufactured to exact OEM specifications. The kit includes 2 map pockets (front) and 2 tilting pockets (rear), all beautifully engineered and finished to a very high quality. A must to finish your 100-point restoration.



Our ready-to-install door pockets are probably the best you can buy for originality and fit. The tool to mould and cast the door pockets was developed using 3-D scanning on NOS door pockets. The door pockets have a fiberglass rather than cardboard substructure, which guarantees durable structural integrity and water resistance. Grain and gloss of the vinyl surface coat have been optimised to match the typical patina found on the arm rest and door caps of '69-'74 models. The edges are finished with the original polished and anodised aluminum strips with the correct diamond shaped insert. The inside of the door pockets are lined with velvet flocking just like the original. The front pockets have the original rubber molded strip on top.

All reinforcements, slide bolts, fasteners and fittings are like the original. We guarantee a factory authentic appearance and fit.

The door pockets come with step-by-step installation instructions and pictures. Installation requires no specific tools and is within the ability of a moderately experienced home mechanic.

Please NOTE:
It includes 2 elastic bands, 2 allen bolts (M6), 8 small conic bolts (M4), 2 nuts (M6), 8 rivets and 8 plastic hinges.

For Fitting Instructions CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155500011

The product you are viewing cross references to these numbers

Pair of ready-to-install headrests for all Porsche 911 and 912 models from 1966 - 1973 with standard seats, re manufactured to exact OEM specifications. This is NOT a cover, but a complete and beautifully engineered assembly trimmed in Porsche classic Skai or leather as required.

Our headrests are probably the best you can buy for originality and fit. The headrest tilting mechanism is an exact replica of the original Recaro design. The cell foam around the tilting mechanism is molded to the exact same shape and density of the original. We can cover the headrests with the original Porsche Classic Skai or Porsche Nappa leather. This guarantees a perfect match with our front seat restoration kit.

Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic. Headrests were standard for '72-'73 models but will fit all '66-'73 Recaro comfort seats with headrest guides.

Please make sure your seats are equipped with headrest guides before ordering.

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Springbox reinforcement kit for the 2 front seats of all Porsche 911 and 912 models from 1966 - 1973 with standard seats. Contains 8 high resistance coils, 2 hourse hair panels and correction filling.

The seat base of your Porsche 911 '66-'73 is of the spingbox type. Extensive use and age will cause the coils to loose resistance and break. This reduces the support of the seat and will overstretch your seat covers causing them to tear and crack.

When replacing your front seat covers it is recommended to install our front seat reinforcement kit. It will provide you better ride comfort and increase the life of you new seat covers.

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Complete restoration kit for the 2 front seats of all Porsche 911 and 912 models from 1966-1973 with standard seats (OEM specification). This kit is available with plain, basket weave or 'Pepita' (Houndstooth fabric) center section, in Porsche Nappa leather or classic vinyl. Headrests covers (standard for '72-'73 models) are not included in this kit, but can be ordered separately.

The seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; from the finest Porsche Nappa leather with basketweave embossing for the center sections (if required), colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Complete OEM specification headlining for all Porsche 911 Coupe models 1965 -1989 & Porsche 964, This headliner is available in white and black (RS specification), for sunroof and non-sunroof models.



Our headlining is probably the best you can buy for fitment. we use perforated heavy grain vinyl. All materials are precision cut, blind stitched and pre-formed to a factory fit.

To order, please state your desired colour (black or white) and whether you have a sunroof or non-sunroof coupe.

Fits:
Porsche 911 1965-89
Porsche 964 1989-94

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155505515

The product you are viewing cross references to these numbers

Complete ready-to-install door panels for all Porsche 911 models from 1974-1989 and all 964 models 1989-1993 in VINYL (SET OF 2)



Our door panels are among the best you can buy for originality and fit. Matched to Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board, top quality calico backing material, exact specification pleat filling, right down to the high resistance yarns we use. All panels are precision cut, stitched and pressure glued to guarantee a factory authentic fit.

To install, simply make openings for the speakers/ accessories and install. Please note that door pockets, arm rest, door panel clips or other panel hardware are not included.

Because of fading of the original material and colour differences between dye lots, we offer the door panels in Black only.

Sold as a Pair Left & Right side

Fits:
Porsche 911 1974-89
Porsche 964

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155503BLKVN

The product you are viewing cross references to these numbers

Complete, new and original cabriolet boot cover for your Porsche 911 cabriolet from 1985 through 1993. This is a gorgeous, OEM specification Porsche part avalable in dark blue or black. Bag for the cover is optional.

Our cabriolet boot cover is probably the best you can buy for completeness, originality and fit. It is identical to the Porsche product in every respect. We use the original German materials; top grade "Sonnenland Classic" canvas and colour coded edge-binding canvas both from the original supplier, high resistance yarns and all necessary precision fasteners and fittings. Even the heavy gauge vinyl and "Velcro" used for the manufacturing the bag exactly match Stüttgart factory specifications. All materials are precision cut, pressure glued, form-stitched and edge bound to guarantee a factory authentic fit.

If you currently drive your Porsche without a boot cover, be aware that you may be damaging your convertible top. These cars were factory delivered with the boot cover to ensure the webbing structure inside the convertible top is protected under high speed, top-down driving. Furthermore, nothing beats the boot cover to accentuate the sex appeal of your curvaceous cabriolet.

To ensure that our boot cover will fit perfectly on both original and replaced soft tops, TENAX fasteners are delivered with the cover but not pre-installed.

Delivery Time is Normally 14 - 21 working days on this product

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911561100

The product you are viewing cross references to these numbers