Brey-Krause

Brey Krause B-Pillar Brace without Truss.



Fits:
Porsche 964 1989-94 Coupe
Porsche 993 1995-98 Coupe

Brey-Krause's B-Pillar Brace System adds support to the structural integrity of Porsche 911 Coupes ('89 - '98). Through innovative engineering, this unit adds structural support and body rigidity to counteract stresses incurred on the track. The discreet design allows drivers to leave the unit in the car when driving on the street.

The B-Pillar Brace System without Truss is composed of the following components:

B-Pillar Brackets - Part R-1960
Rear Body Braces - Part R-1950 (for 911 Coupes '89 – '98) and Part R-1955 (for 911 Coupes '74 – '88)
B-Pillar Vertical Supports - Part R-1990
Upper Cross Brace - Part R-1940


Material: 6061 aluminum vertical supports - Stainless steel brackets and cross support
Finish: Clear anodized aluminum, black powder-coated mounting brackets
Weight: See individual component pages (links above)
Models: 911 Coupes '74 – '88 and 911 Coupes '89 – '98, differentiated by the Rear Body Brace
Installation: Attaches to b-pillar and outboard rear seat belt factory mounting points

Brey Krause B-Pillar and Truss Support System.

 

Fits:
Porsche 911 1974-88 COUPE

Brey-Krause's B-Pillar Brace System adds support to the structural integrity of '74-'88 Porsche 911 Coupes. Through innovative engineering, this unit adds structural support and body rigidity to counteract stresses incurred on the track. The discreet design allows drivers to leave the unit in the car when driving on the street.

The product was designed to work in conjunction with another piece of track-ready equipment offered by Brey-Krause, the Harness Mount Truss. This item allows drivers to mount their harnesses directly to the bar. The B-Pillar Brace must be installed with the Harness Mount Truss in order to maximize its strengthening capabilities. The B-Pillar Brace will work with Harness Mount Trusses already installed in the field.

The B-Pillar Brace System is composed of the following components:

B-Pillar Brackets - Part R-1960
Rear Body Braces - Part R-1955 (for 911 Coupes '74 – '88)
B-Pillar Vertical Supports - Part R-1990
Upper Cross Brace - Part R-1940
Harness Mount Truss - Part R-1025

Material: 6061 aluminum vertical supports - Stainless steel brackets and cross support
Finish: Clear anodized aluminum, black powder-coated mounting brackets
Weight: See individual component pages (links above)
Models: 911 Coupes '74 – '88 and 911 Coupes '89 – '98, differentiated by the Rear Body Brace
Installation: Attaches to b-pillar and outboard rear seat belt factory mounting points
Miscellaneous: Must first install R-1025 Harness Mount Truss

Brey Krause B-Pillar Brace System.

Fits:
Porsche 911 1974-88 Coupe
Porsche 911 (964 / 993) 1989-98 Coupe

Brey-Krause's B-Pillar Brace System adds support to the structural integrity of Porsche 911 Coupes ('74 - '89). Through innovative engineering, this unit adds structural support and body rigidity to counteract stresses incurred on the track. The discreet design allows drivers to leave the unit in the car when driving on the street.

The B-Pillar Brace System without Truss is composed of the following components:

B-Pillar Brackets - Part R-1960
Rear Body Braces - Part R-1950 (for 911 Coupes '89 – '98) and Part R-1955 (for 911 Coupes '74 – '88)
B-Pillar Vertical Supports - Part R-1990
Upper Cross Brace - Part R-1940

Material: 6061 aluminum vertical supports - Stainless steel brackets and cross support
Finish: Clear anodized aluminum, black powder-coated mounting brackets
Weight: See individual component pages (links above)
Models: 911 Coupes '74 – '88 and 911 Coupes '89 – '98, differentiated by the Rear Body Brace
Installation: Attaches to b-pillar and outboard rear seat belt factory mounting points

Brey Krause Harness Guide Bar.



Fits:
Porsche 944 / 924 / 968

Material: Type 304, stainless steel.
Finish: Satin finish stainless.
Weight: 9 lbs. 7 oz.
Models: 944, 924 & 968
Installation: Bar attaches to factory mounting points in "B" pillars and shoulder straps.
Miscellaneous: Bar is designed to allow enough seat travel for tall drivers.

For Installation instructions please CLICK HERE

Brey Krause Shoulder harness mount. 



Fits:
Porsche 981 Cayman / Cayman GT4 2012-16
Porsche 718 (982) Cayman / Cayman GT4 2017>>

Material: Type 304 stainless steel.
Finish: Wrinkle finish black power coat.
Weight: 5 lbs.
Models: Cayman 981 ('12-'16) and GT4
Installation: Bar attaches to factory cross-member
Miscellaneous: One R-1046 harness mount is required per seat. The R-1046 is designed for use with bolt in harnesses. The shoulder bolts are 12mm, which allows them to work well with 13mm or .5" bolt in brackets. If you wish to convert and existing wrap around harness for use with the R-1046, we recommend the Schroth B24 bolt in bracket (sr B24.15.13 NC, 2 required per seat).

For Installation instructions please CLICK HERE

Brey-Krause's new Cayman Harness Truss is a unique mounting system that helps to position the driver using fixed attachment locations for harness straps. The unit is made of aluminum and stainless steel for superior strength and support, yet it is lighter than tubular or steel bars. It has been tested and certified to meet NHTSA load requirements. The R-1045 is easy to install and remove, utilizing existing factory mounting points.

The lattice is precision water-jet machined. It has been tested and certified to handle the types of forces required by the National Highway Traffic Safety Administration DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.

Note: Powder-coated R-1045 shown is custom

Brey Krause Harness Mount Truss.



Fits:
Porsche 987 Cayman 2005-12

Material: 6061-T6 aluminium skeleton and reinforcing bar. Type 304 stainless steel brackets.
Finish: Clear anodized aluminium with satin stainless mounting brackets.
Weight: 9.9 lbs.
Models: Cayman (including S, R, Club Sport and Black Edition) Coupes '06 - '12
Installation: Bar attaches to factory mounting points in "B" pillars.
Miscellaneous: Harness Truss is designed to allow enough seat travel for tall drivers. The stainless steel mounting brackets can be left installed in the "B" pillars to easily remove and remount the bar in minutes. This Harness Truss allows factory seat belts to be used in conjunction with harnesses.

For Installation instructions please CLICK HERE

Brey-Krause's new Cayman Harness Truss is a unique mounting system that helps to position the driver using fixed attachment locations for harness straps. The unit is made of aluminium and stainless steel for superior strength and support, yet it is lighter than tubular or steel bars. It has been tested and certified to meet NHTSA load requirements. The R-1045 is easy to install and remove, utilizing existing factory mounting points.

The lattice is precision water-jet machined. It has been tested and certified to handle the types of forces required by the National Highway Traffic Safety Administration DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.

Note: Powder-coated R-1045 shown is custom

Brey Krause Sub Strap Mount Passenger Side.



Fits:
Porsche 997 / 987 Sport Bucket Seats - Passenger Side

Material: Stainless steel tubing
Finish: Powder-coated in durable black wrinkle-finish
Weight: 3 lbs.
Models: Fits 997 Optional Sport Bucket Seats, GT2/GT3 Seats (passenger side)
Installation: Attaches to passenger seat assembly
Miscellaneous: Attaches to passenger seat assembly using factory mounting points

For Installation instructions please CLICK HERE

Brey Krause Sub Strap Mount Drivers Side.



Fits:
Porsche 997 / 987 Sport Bucket Seats - Driver Side

Material: Stainless Steel Tubing
Finish: Powder-coated in durable black wrinkle-finish.
Weight: 3 lbs.
Models: Fits 997 Optional Sport Bucket Seats, GT2/GT3 Seats (driver side).
Installation: Attaches to driver side seat assembly.
Miscellaneous: Attaches to driver side seat assembly using factory mounting points. This mount bar is used with Brey-Krause's R-2032 fire extinguisher mount.

For Installation instructions please CLICK HERE

Related Parts:
R-2032 Fire Extinguisher Mount

Brey Krause Sub Strap Mount for BK Side Mount Systems. For Mounting a Sub Strap to R-925X Series & R-9052 Side Mounts.
for seats up to 426mm wide at the front mount points.



Fits:
Porsche 991 / 981 / 997 and 987 models with R-9052 Side Mounts

Material: 304 series stainless steel steel tubing
Finish: brushed stainless finish
Weight: 2 lbs.
Models: R-9052 Side Mounts
Installation: R-9052 Porsche 991, 981, 997, 987 Side Mounts integrated mounting points.
Miscellaneous: For seats up to 426mm wide at the front mount points. For seats over 425mm use the R-9258 sub strap mount.

For Installation instructions please CLICK HERE

Related Parts:
Porsche
R-9052 Side Mounts For OEM 991,981,997,987 Sliders
R-9006 Clip-In Inside Lap Belt Mounts
R-9003 Clip-In Outside Lap Belt Mounts

Brey Krause Clip-In Lap Belt Mounting Kit for OEM Sliders.



Fits:
Porsche 991 / 981 / 997 and 987 models with OEM manual sliders

Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 5oz.
Models: All 991, 981, 997, and 987 models with OEM manual sliders.
Installation: Secures clip-in lap belts to factory tunnel side (inside) seat belt mounting point on Porsche OEM 991, 981, 997, 987 manual sliders.

For Installation instructions please CLICK HERE

Brey Krause Seat Floor Mount Adapter with Integrated Sub Strap Mount - R-907X Series Seat Mounting Brackets.



Fits:
Porsche 996 / 997
Porsche Cayman / Boxster

Material: Type 304 stainless steel
Finish: Satin finish
Weight: 4 lbs.
Models: Fits 996/997/986/987
Installation: Attaches to driver or passenger side. All necessary hardware included (grade 10.9 M8 bolts as recommended by F.I.A.)
Miscellaneous: Seat brackets must be purchased separately - see BK R-907X series side mount brackets.

For Installation instructions please CLICK HERE


Capitalize on Brey-Krause's innovative engineering with this race seat mounting option for 996/997/986/987/Cayman Porsches.

The R-9044 offers a simple installation process combined with significant adjustment flexibility. The assembly mounts to the floor and places the seat in the lowest possible position. The integrated sub-bar is adjustable for proper 5 or 6-point sub-strap routings. This design also incorporates three front-to-rear fixed mounting points for the seat brackets (brackets not included - see BK R-907X series brackets).

The entire assembly (including race seat) can be easily installed and removed as a single unit for race events.

Related Items:
R-2044 - Extinguisher Mount

Side Mount Brackets for Sparco Seats
R-9071 - Sparco Evo, Pro 2000
R-9072 - Sparco Evo, Pro 2000
R-9073 - Sparco Evo 2
R-9074 - Sparco Evo 2
R-9761 - Sparco Evo 2 Plus
R-9762 - Sparco Evo 2 Plus
R-9075 - Sparco Evo 2 US
R-9076 - Sparco Evo 2 US

Side Mount Bracket for Recaro Seats
R-9075 - Recaro Pole Position, SPG XL
R-9076 - Recaro Pole Position, SPG XL
R-9755 - Recaro SPA, SPG, Pro HANS
R-9756 - Recaro SPA, SPG, Pro HANS

Side Mounts for OMP Seats
R-9751 - OMP HTE
R-9752 - OMP HTE

Brey Krause Sub Strap Mount.



Fits:
Porsche 996 / 997
Porsche Cayman / Boxster

Material: 1.5" X 1" X .125" wall carbon steel tubing
Finish: Powder-coated in durable black wrinkle-finish
Weight: 3 lbs.
Models: Fits 996/997, Cayman, and Boxster
Installation: Attaches to R-9060, R-9063, R-9067 side mounts
Miscellaneous: This mount works with the R-9060, R-9063, R-9067 side mount brackets in conjunction with aftermarket sliders and with the optional R-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.

For Installation instructions please CLICK HERE

Related Part:
R-9060 Side Mount Brackets for MOMO Super Cup (for Sparco sliders)
R-9063 Side Mount Brackets for Recaro Profi SPG, Recaro Profi SPA, Recaro Pro Racer HANS, Recaro Pro Racer HANS SPA - (fits Recaro Slider Part 0.70.9NT)
R-9067 Side Mount Brackets for Recaro SPA, SPG, and Pro Racer HANS Seats
R-2030 Fire Extinguisher Mount - Boxster & 996/997

Brey Krause Sub Strap Mount.

  

Fits:
Porsche 996 1999-04 Manual Sliders
Porsche 986 Boxster 1997-04 Manual Sliders

Material: 1.5" X 1" X .125" wall carbon steel tubing
Finish: Powder-coated in durable black wrinkle-finish
Weight: 3 lbs.
Models: Fits 996/997 and Boxster
Installation: Attaches to R-907X series side mounts.
Miscellaneous: This mount works with the R-907X series side mount brackets in conjunction with factory non-power 996/997/Boxster sliders and with the optional R-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.

For Installation instructions please CLICK HERE

Related Part:
R-907X Side Mount Brackets
R-2030 Fire Extinguisher Mount

Brey Krause Harness Mount Truss.



Fits:
Porsche 996 / 997 Coupe

Material: 6061 T-6 aluminium skeleton, type 304 stainless steel strut mount.
Finish: Anodized aluminium skeleton. Strut mount powdercoated in black wrinkle finish.
Weight: 15.5 lbs.
Models: 996/997 Coupe - NOTE: Please use part R-1029 for 997 Cabriolet.
Installation: Bar attaches to rear strut tops & seat belt mounting points and is easy to remove/reinstall. For the 996/997 GT2 & GT3, the R-1031 adaptor kit must be used. For models with Bose rear deck mounted sound system, use model R-1029 instead of model R-1035.

For Installation instructions please CLICK HERE

This harness mount was developed in response to customer requests for a truss-style harness mount for the Porsche 996/997 coupe. The new R-1035 features water-jet machined aluminium construction much like our R-1025 harness truss. Like all Brey-Krause harness mounts, the R-1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats.

The R-1035 been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. This harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking.

Brey Krause Harness Mount Bar.



Fits:
Porsche 996 / 997 Coupe

Material: Type 304, stainless steel
Finish: Powder coated in durable black wrinkle-finish
Weight: 16lbs. 7oz.
Models: 996/997 Coupe NOTE: For GT-3 and GT-2 applications use R-1031 Adapter
Installation: Bar attaches to rear strut tops & seat belt mounting points and is easy to remove/reinstall. For models with Bose rear deck mounted sound system, use model R-1029 instead of model R-1030.
Miscellaneous: Bar is designed to allow enough seat travel for tall drivers. Includes proper provisions for Seat Back Brace.

For Installation instructions please CLICK HERE

The 996/997 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The 996/997 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.

Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied on unless it has been tested to support the loads required by the National Highway Traffic Safety Administration.

Accessories:
Replacement Hardware: R-1030-HW
Seat Back Brace: R-9019 & R-9020

Brey Krause Harness Mount Truss.



Fits:
Porsche 996 / 997 Cabriolet
Porsche 996 / 997 Coupe with BOSE Speaker Box

Material: Type 304, stainless steel
Finish: Powder coated in durable black wrinkle-finish
Weight: 16 lbs
Models: 996/997 Cabriolet or 997 coupes with the Bose speaker box
Installation: Bar attaches to seat belt mounts & seat track hardware.
Miscellaneous: Bar is designed to allow enough seat travel for tall drivers. Include provisions for Seat Back Brace.

For Installation instructions please CLICK HERE

The 996/997 Cabriolet harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The 996/997 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.

Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied on unless it has been tested to support the loads required by the National Highway Traffic Safety Administration.

Certain power seats may interfere with installation of floor brackets. Please contact Brey-Krause for alternate part if necessary.

The Brey-Krause Harness Mount supported the loads specified by the National Highway Traffic Safety Admin. DOT for upper torso restraints in all automobiles. Tensile tests performed by an independent lab.

Accessories:
Replacement Hardware: R-1029-HW
Seat Back Brace: R-9019 & R-9020

Brey Krause Passenger Harness Mount Bar.



Fits:
Porsche 996 GT3 Cup Cars 2004-12

The R-1040 been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.

This harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking.

Material: 6061 T6 Aluminum
Finish: Clear anodized
Weight: appox. 1.75lbs
Models: (04-12) GT3 Cup Cars
Installation: Bolts to Factory Cage
Miscellaneous: No permanent modification to the car. Allows for proper installation of passenger shoulder harness. Kit includes shaft collar to prevent harness slippage.

For Installation instructions please CLICK HERE

Brey Krause Tunnel Side Seat Belt Anchor.



Fits:
Porsche 911 / 964 / 993 1984-98

Material: Carbon steel tubing
Finish: Powder-coated in durable black wrinkle-finish
Weight: 3 lbs.
Models: Fits 964 and 993 Porsche 911 ('84-'98)
Installation: Attaches to floor pan
Miscellaneous: Attaches to floor pan using factory mounting points

For Installation instructions please CLICK HERE

Brey Krause Tunnel Side Seat Belt Anchor.



Fits:
Porsche 911 1965-89
Porsche 968 1992-95
Porsche 944 1982-91

R-9005 attaches inside 3-point seat belt and lap belt mount (R-9001 or R-9004) to aftermarket sliders.

Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 9.04oz
Models: 911 & 944
Installation: For use with aftermarket sliders. Provides mounting point for lap belts on tunnel side.

For Installation instructions please CLICK HERE

Brey Krause PAIR of Short Inside Lap Belt Mounts.



Fits:
Porsche 911 All models
Porsche 986/987/981 Boxster all models
Porsche 987/981 Cayman all models

These brackets were intended for seat applications where the standard Brey-Krause tunnel-side lap belt mount (R-9001) is too long.

Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 5oz.
Models: All 911, Boxster and Cayman models
Installation: Secures snap-in lap belts to factory tunnel side (inside) seat belt mounting point.
Miscellaneous: Recommended for extra-low seating applications where the R-9001 sits excessively high. One pair will work for both seats.
Note: Part# R-9002 hardware kit is required for installation in (1985-1989) model Porsches. Use part R-9003 for outside belt mount.

For Installation instructions please CLICK HERE

Brey Krause PAIR of Outside Lap Belt Mounts.

Fits:
Porsche 911 All models
Porsche 986/987/981 Boxster all models
Porsche 987/981 Cayman all models

Material: Tig welded, type 304, stainless steel.
Finish: Satin finish stainless.
Weight: 6oz.
Models: All Porsche sports cars.
Installation: Secures snap-in lap belts to outside seat belt mounting point.
Miscellaneous: Allows user to remove and install belts in seconds. Will not interfere with factory seat belt. One pair will work for both seats. Use part R-9001 for inside belt mount.

For Installation instructions please CLICK HERE

Brey Krause PAIR of Long Inside Lap Belt Mounts.



Fits:
Porsche 911 All models
Porsche 986/987/981 Boxster all models
Porsche 987/981 Cayman all models

Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 6oz.
Models: All 911, Boxster and Cayman models
Installation: Secures snap-in lap belts to factory tunnel side (inside) seat belt mounting point.
Miscellaneous: Allows user to remove and install belts in seconds. Will not interfere with factory seat belt.

For Installation instructions please CLICK HERE

Brey Krause Harness Mount Truss.



Fits:
Porsche 911 1974-98 COUPE

Material: 6061-T6 aluminum skeleton and reinforcing bar. Type 304 stainless steel brackets.
Finish: Anodized aluminum with satin stainless mounting brackets.
Weight: 9.44 lbs.
Models: 911 Coupes '74 - '98
Installation: Bar attaches to factory mounting points in "B" pillars.
Miscellaneous: Harness Truss is designed to allow enough seat travel for tall drivers. The stainless steel mounting brackets can be left installed in the "B" pillars to easily remove and remount the bar in minutes.

For Installation instructions please CLICK HERE

In response to the many requests from Porsche drivers looking for a harness guide bar that would not only guide their driving harnesses but also allow them to mount their harnesses directly to the bar, we developed the "Harness Truss".

The Harness Truss has been tested and certified to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. It's strong, yet it weighs only a fraction of what a support of the same strength made from tubular or bar steel would weigh.

The Harness Truss is precision water-jet machined for a perfect fit into Porsche factory mounting points. This type of machining is accurate and does not create heat affected areas in the metal which can alter tensile strength. Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied upon unless it has been tested to support the loads required by the National Highway Traffic Safety Administration.

Accessories:
Seat Back Brace Adapter Bracket: R-9018
Seat Back Braces: R-9019 & R-9020 .

Brey Krause Harness guide bar.



Fits:
Porsche 911 1974-93 TARGA

Material: Type 304, stainless steel.
Finish: Satin finish stainless.
Weight: 12 lbs. 14oz.
Models: All 911 Targas '74 - '93.
Installation: Bar attaches to factory mounting points in "B" pillars. Support rods attach to lap belt mounting points.
Miscellaneous: Bar is designed to allow enough seat travel for tall drivers.

Download the detailed installation instructions

Brey-Krause harness products provide a variety of solutions for Porsche drivers utilizing driving harnesses. Where harnesses are mounted to factory mounts, the Brey-Krause Harness Guide Bars ensures that the harnesses stay positioned properly. The Brey-Krause Harness Mount Bars additionally allow the harnesses to be mounted directly to the bar for proper positioning. The Brey-Krause harness products are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.

Brey Krause Harness Guide Bar.



Fits:
Porsche 911 1974-98 COUPE

Material: Type 304, stainless steel.
Finish: Satin finish stainless.
Weight: 9 lbs. 15 oz.
Models: All 911 Coupes '74 - '98.
Installation: Bar attaches to factory mounting points in "B" pillars.
Miscellaneous: Bar is designed to allow enough seat travel for tall drivers.

For Installation instructions please CLICK HERE

Brey-Krause harness products provide a variety of solutions for Porsche drivers utilizing driving harnesses. Where harnesses are mounted to factory mounts, the Brey-Krause Harness Guide Bars ensures that the harnesses stay positioned properly. The Brey-Krause Harness Mount Bars additionally allow the harnesses to be mounted directly to the bar for proper positioning. The Brey-Krause harness products are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.