Elephant Racing
About Elephant Racing
Elephant Racing is the established global leader in design and manufacture of performance suspension products for Porsche cars.
Silicon Valley is the new center of automotive technology, electric, and autonomous cars. Elephant Racing is the Silicon Valley approach applied to automotive suspension products. Our business model is built around web enablement, sophisticated engineering tools, and the development of advanced automotive suspension technology.
Rubber trailing arm bushings. Porsche 914 70-76
Code: 2290002
DIY Trailing arm bushings kit. 1 kit required per car.
Kit includes: 4 rubber bushings, 2 pivot shafts, and install tools.
Fits:
Porsche 914 1970-76
Rubber trailing arm bushings are now available in DIY kit form. In addition to a complete set of 4 OEM spec rubber bushings and two new pivot shafts, the kit includes our proprietary installation tools (patent pending) and instructions which are essential for successful installation. Use a pipe clamp or shop press to complete the install.
Restore Ride and Performance
Rubber is the choice if you want to restore factory ride and performance in a zero-maintenance solution. Check our PolyBronze Bearings for a high-performance solution.
Download the detailed installation instructions
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2290002
The product you are viewing cross references to these numbers
Kit includes: 4 rubber bushings, 2 pivot shafts, and install tools.
Fits:
Porsche 914 1970-76
Rubber trailing arm bushings are now available in DIY kit form. In addition to a complete set of 4 OEM spec rubber bushings and two new pivot shafts, the kit includes our proprietary installation tools (patent pending) and instructions which are essential for successful installation. Use a pipe clamp or shop press to complete the install.
Restore Ride and Performance
Rubber is the choice if you want to restore factory ride and performance in a zero-maintenance solution. Check our PolyBronze Bearings for a high-performance solution.
Download the detailed installation instructions
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2290002
2290002
91433105703
91433105803
The product you are viewing cross references to these numbers
Product Vehicle Group
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
£450.00
Now £441.00
Orderable 
Lower Control Arm Reinforcement Kit. Porsche 911
Code: 2051002
Lower Control Arm Reinforcement Kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2051002
The product you are viewing cross references to these numbers
1 kit required per car
Fits:
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1976
Porsche 914 - 1970 to 1976
Avoid Control Arm Failure
For Safari type cars we recommend reinforcing the control arms to help cope with the additional forces that off-road vehicles must deal with.
These precision cut steel plates and gussets are to be welded at strategic locations to strengthen the factory control arms.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2051002
91134190100
91134190200
91134190101
91134190201
93034190101
93034190201
91434190100
91434190200
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£325.00
Now £318.50
Orderable
Street and fast road spec coilover main spring Rear. Porsche 911
Code: 1-
Race Spec Coilover Main Spring Rear.
Sold each - 2 required per car
Fits:
Porsche 911 - 1965 to 1989
Sold each - 2 required per car
Fits:
Porsche 911 - 1965 to 1989
Hypercoil Main Springs
Main Spring – The finest springs available, Hypercoil.
Choose from a broad selection of rates, here are a few popular front/rear choices:
Spring Type
- 200/300lb – Street performance, canyon carver
- 300/400lb – Autocross, Driver Education
- 400/600lb – Race
Will require a set of helper springs to be added
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £0.00
Race spec coilover main spring Rear. Porsche 911
Code: 1-9A0
Race Spec Coilover Main Spring Rear.
Sold each - 2 required per car
Fits:
Porsche 911 - 1965 to 1989
Sold each - 2 required per car
Fits:
Porsche 911 - 1965 to 1989
Hypercoil Main Springs
Main Spring – The finest springs available, Hypercoil.
Choose from a broad selection of rates, here are a few popular front/rear choices:
Spring Type
- 200/300lb – Street performance, canyon carver
- 300/400lb – Autocross, Driver Education
- 400/600lb – Race
Will require a set of helper springs to be added
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £112.70
Coilover brake line support bracket kit. Porsche 911 / 914
Code: 2280911
Coilover brake line support bracket kit.
Fits:
Porsche 911 - 1965 to 1989
Standard front struts have welded-on brackets to support the brake hard line. Threaded body coilover struts and coilover sleeve conversion require the removal of these brackets, leaving the brake lines unsupported and prone to failure – always at the worst possible time.
- Our support bracket kit is an easy bolt-on support for the brake lines and bolts to existing threaded holes on the strut.
- Easy bolt-on – Attaches to the brake dust shield mounting holes using provided hardware. dust shields can be retained or removed.
- Prevents brake hard line flex / fatigue – Supports the brake hard line. Unsupported, the hard line will constantly flex and eventually leak.
- Quality throughout – Purpose made brackets are laser – cut from stainless steel and pre-formed. Top quality hardware is provided to complete the kit.
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£120.00
Now £117.60
Orderable
Front and Rear Coilover Helper Springs. Porsche 911
Code: 1-CS
Front and Rear Coilover Helper Springs.
Sold each - 2 required per axle
Fits:
Sold each - 2 required per axle
Fits:
Porsche 911 - 1965 to 1989
Helper springs have a very low rate and collapse under the car’s weight and their purpose is to keep the main spring tensioned when the wheel goes to full droop under hard cornering (lifted wheel), over bumps, and on the jack.
Helper springs are required in any coilover setup in which the mainspring looses tension at full droop – that is most coilover setups. If the following formula is true, you need helper springs:
Corner weight / Wheel rate < rebound travel
Without helpers, the main spring may not re-seat properly and will cause a sudden change to that corner weight/height.
Correct spring divider hardware is required between the main and helper springs.
Helper springs are available in a variety of diameters and lengths.
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £44.10
Coilover main spring front. Porsche 911
Code: 1-
Coilover main spring front.
Sold each - 2 required per car
Fits:
Porsche 911 - 1965 to 1989
Sold each - 2 required per car
Fits:
Porsche 911 - 1965 to 1989
Hypercoil Main Springs
Main Spring – The finest springs available, Hypercoil.
Choose from a broad selection of rates, here are a few popular front/rear choices:
Spring Type
- 200/300lb – Street performance, canyon carver
- 300/400lb – Autocross, Driver Education
- 400/600lb – Race
Will require a set of helper springs to be added
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £112.70
Rear shock tower reinforcement. Porsche 911 1965-71
Code: 2280923
Rear shock tower reinforcement.
Sold per kit, 1 kit required per car.
Fits:
Porsche 911 - 1965 to 1972
✓ Laser Cut – Fits the profile of the shock tower perfectly.
✓ Strong – Solidly ties the towers and cross-member into unibody box sections and inner wheel well. Distributes the shock loads properly and reinforces the entire section.
✓ Holes – Great appearance and convenient routing of hoses and wires.
✓ Weld from one side – Fully seam weld without removing rear firewall.
✓ Light Weight – Properly engineered to distribute loads, not 'over engineered' with excess material and weight.
When converting the 911 torsion bar rear suspension to coilover, the rear shock towers should be reinforced. Coilover springs introduce loads the towers were not designed to handle. Without reinforcement, cracks can develop over time – most frequently between the crossmember and unibody box sections.
Our reinforcement kit strengthens this vulnerable area and properly distributes coilover spring loads.
Rear Shock Tower Reinforcement
Our brackets make it easy to get a professional result, saving you the time and guesswork cutting your own.
This kit requires welding for installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2280923
The product you are viewing cross references to these numbers
Sold per kit, 1 kit required per car.
Fits:
Porsche 911 - 1965 to 1972
✓ Laser Cut – Fits the profile of the shock tower perfectly.
✓ Strong – Solidly ties the towers and cross-member into unibody box sections and inner wheel well. Distributes the shock loads properly and reinforces the entire section.
✓ Holes – Great appearance and convenient routing of hoses and wires.
✓ Weld from one side – Fully seam weld without removing rear firewall.
✓ Light Weight – Properly engineered to distribute loads, not 'over engineered' with excess material and weight.
When converting the 911 torsion bar rear suspension to coilover, the rear shock towers should be reinforced. Coilover springs introduce loads the towers were not designed to handle. Without reinforcement, cracks can develop over time – most frequently between the crossmember and unibody box sections.
Our reinforcement kit strengthens this vulnerable area and properly distributes coilover spring loads.
Rear Shock Tower Reinforcement
Our brackets make it easy to get a professional result, saving you the time and guesswork cutting your own.
This kit requires welding for installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2280923
2280923
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£190.00
Now £186.20
Orderable
Rear coilover sleeve conversion kit. Porsche 911
Code: 232100
Rear coilover sleeve conversion kit.
Easy way to convert your existing non-threaded Bilstein (with 50mm body and 14mm rod)rear struts
Fits:
Porsche 911 - 1965 to 1989
Does not come with rear shock absorber as shown in picture
Easy way to convert your existing non-threaded Bilstein (with 50mm body and 14mm rod) to full adjustable height coilover setup. No welding required. Can also be used with our Von Shock non-threaded shocks.
Front Sleeve Conversion kit contains all these items:
- Upper Perch – Extended to move spring below chassis. Super extended upper perches are provided for ’65-’71 cars as they need more clearance.
- Lower Perch – Easy height adjustment and corner balancing. Clamp-type is secure and kind to threads.
- Threaded Sleeve – Provides height adjustability. Compact design fits 2.25 inch springs for superior clearance.
- Snap Ring – Snap ring supports the threaded sleeve. Regular Bilstein shocks require a snap ring groove to be machined into the body.
- Instructions – kit includes full installation instructions.
Please Note - Kit Requires
2.25 inch ID springs
Machined snap ring groove into 50mm shock body
Springs and dividers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £0.00
Front coilover sleeve conversion kit. Porsche 911
Code: 232000
Front coilover sleeve conversion kit.
Convert to a full coilover setup while retaining your existing non-threaded Bilstein or Boge front struts
Convert to a full coilover setup while retaining your existing non-threaded Bilstein or Boge front struts
Fits:
Porsche 911 - 1965 to 1989
This conversion kit provides a cost-effect way to convert to a full coilover setup while retaining your existing non-threaded Bilstein or Boge struts.
Our no-weld kit converts regular Bilstein or Boge struts to full adjustable height coilover setup.
Front Sleeve Conversion kit contains all these items:
- Upper Perch – Extended to move spring below chassis on Bistein strut kits, thus allowing max camber adjustment range. Choose perch for regular camber plates or QuickChange Camber Plate fitment.
- Seat Bearing Kit – Prevents spring wind-up allowing ease-of-steering.
- Strut inserts – Are not included. You may wish to purchase Von Shocks valved to match your chosen springs.
- Strut Wiper – Shortens strut 3/4 inch for added travel, much needed on lowered cars.
- Lower Perch – Easy height adjustment and corner balancing. Clamp-type is secure and kind to threads.
- Threaded Sleeve – Provides height adjustability. Compact design fits 2.25 inch springs for superior tyre clearance. Boge Struts require a 2.5″ spring. The Boge kit comes with 2.25″ to 2.5″ spring adapter.
- Sleeve Base – Slips on and positions threaded sleeve, no welding required.
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £0.00
Cancellation Kit for PASM Porsche 997 / 991 / 992 / 987 / 981 / 718
Code: 2350001
Cancellation Kit for PASM
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2350001
The product you are viewing cross references to these numbers
Fits:
Porsche 997 - 2005 to 2012
Porsche 991 - 2012 to 2019
Porsche 992 - 2019 Onwards
Porsche 987 Boxster / Cayman - 2005 to 2012
Porsche 981 Boxster / Cayman - 2012 to 2016
Porsche 718 Boxster / Cayman - 2017 Onwards
This kit prevents dash fault codes from appearing when replacing original electronically controlled PASM type shocks/dampers with conventional shocks or coilovers on Porsche cars.
These modules plug into the control harness in place of the original PASM shocks, emulating their behavior. This satisfies the vehicle ECU tests and prevents the fault messages.
- Eliminates PASM fault messages
- Works with all Porsche cars originally PASM equipped
- May work on other vehicles
- Easy installation, no programming
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2350001
992959411F
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp)
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp)
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche 992 Speedster 4.0L
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
- Porsche 992 GT3 4.0L
- Porsche 992 GT3 RS 4.0L
- Porsche 992 (911) Sport Classic 3.8L
- Porsche 992 (911) Dakar 3.0L
£731.88
Now £717.24
Orderable
Finned brass solid oil lines feed and return. Porsche 911 1969 to 1989
Code: 93020704646
Finned brass solid oil lines feed and return.
Fits:
Porsche 911 - 1972
Porsche 911 - 1969 to 1989
Please note
For cars (1969 to 1973) the 1974-1989 style factory external oil thermostat must be used
Our proprietary design finned oil lines directly replace the factory lines that connect the external thermostat to the front fender mounted oil cooler.
Elephant Racing Purge Valve
No more partial oil changes. Built-in valve lets you evacuate the oil cooler and lines using compressed air. A quick blast forces dirty oil from the lines and cooler into the oil tank. Removes 1-2 quarts the engine and tank drain plugs leave behind.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93020704646
The product you are viewing cross references to these numbers
Fits:
Porsche 911 - 1972
Porsche 911 - 1969 to 1989
Please note
For cars (1969 to 1973) the 1974-1989 style factory external oil thermostat must be used
Our proprietary design finned oil lines directly replace the factory lines that connect the external thermostat to the front fender mounted oil cooler.
Elephant Racing Purge Valve
No more partial oil changes. Built-in valve lets you evacuate the oil cooler and lines using compressed air. A quick blast forces dirty oil from the lines and cooler into the oil tank. Removes 1-2 quarts the engine and tank drain plugs leave behind.
Brass construction for corrosion resistance and full-flow high-quality fittings make Elephant Racing oil lines the choice solution. The lines are formed perfectly – just like OEM.
- Substantial temperature reduction
- Purge valve clears dirty oil from system
- Easy bolt-on installation
- No duct work, sits in air stream under car
- OEM Fit
- Light weight
As shown in the cutaway, cooling fins are formed directly on the oil lines. The fins yield a four-fold increase in heat-dissipating surface area. The combined length of two lines is about 17 feet and with fins they become a giant oil cooler.
Our proprietary finned oil lines dissipate more heat.
A true bolt-in replacement that connects directly to the factory fittings, they can be used in combination with factory or aftermarket fender and valance mounted coolers.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93020704646
93020704603
93020704503
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £1,251.26
+ £35.00 packing surcharge
Plated & plugged hollow torsion bars 26mm. Porsche 911/912/930/356
Code: 1-PP911R26
Plated & Plugged Hollow Torsion Bars.
Plated/Plugged 26mm, PAIR
Fits:
Porsche 911/912/930 1965-86
Porsche 356 A / 356 B / 356 Pre-A, C And CS Read Notes* (1948-65)
Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.
Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.
• Hollow, light weight
• Plated & Plugged
• Consistent spring rate
• Great spline fit
Upgrade Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.
* The size given is a solid-bar-equivalent. Actual hollow bar measures about. 5mm larger.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1-PP911R26
The product you are viewing cross references to these numbers
Plated/Plugged 26mm, PAIR
Fits:
Porsche 911/912/930 1965-86
Porsche 356 A / 356 B / 356 Pre-A, C And CS Read Notes* (1948-65)
Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.
Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.
• Hollow, light weight
• Plated & Plugged
• Consistent spring rate
• Great spline fit
Upgrade Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.
* The size given is a solid-bar-equivalent. Actual hollow bar measures about. 5mm larger.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1-PP911R26
1-PP911R26
90133310105
90133310115
90111110106
90133310205
90133310210
90133310206
91133310109
91133310116
91133310209
91133310216
91133310103
91133310113
91133310203
91133310213
91133310111
91133310114
91133310211
91133310214
91133310112
91133310115
91133310212
91133310215
311511115D
311511116D
94433311500
94433311600
94433310300
94433310400
95133310330
95133310430
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
£548.05
Now £537.09
In stock
GT3 ERX Inner lower control arm (LCA), Rubber Bushing Module. Porsche 986/987/996/997/981/718/991/992
Code: 2180039
GT3 ERX Inner lower control arm (LCA), Rubber Bushing Module.
Fits:
Porsche 996, 997, 991, 992 W/ GT3 Style Control Arms (Front/Rear),
Porsche Boxster, Cayman 1999>> W/ GT3 Style Control Arms (Front Only)
Elephant Racing has developed GT3 type inner lower control arms.
These are readily available and dimensionally identical to the factory parts. They can be mix-matched with the factory type inner/outer lower control arm and shims.
The Elephant Racing inner arm is offered in two flavors, GT3 Street Inner Lower Control Arm and GT3 Cup Inner Lower Control Arm. GT3 street is equipped with a rubber bushed central bushing and the GT3 Cup is equipped with a solid caster adjustable central bushing.
Our GT3 Street Inner Lower Control Arm has sport-hardness rubber bushings to provide upgraded control and driver feedback while still offering good road noise isolation.
Our GT3 Cup Inner Lower Control Arms uses weather sealed spherical bearings. These deliver superior precision, control, and performance. They will transmit a bit more road noise than rubber bushings.
These can be paired with a choice of GT3 outer control lower arms:
– Elephant Racing GT3 Street Outer Lower Control Arms
– Elephant Racing GT3 Cup Outer Lower Control Arms
– Factory GT3 Street Outer Lower Control Arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180039
The product you are viewing cross references to these numbers
Fits:
Porsche 996, 997, 991, 992 W/ GT3 Style Control Arms (Front/Rear),
Porsche Boxster, Cayman 1999>> W/ GT3 Style Control Arms (Front Only)
Elephant Racing has developed GT3 type inner lower control arms.
These are readily available and dimensionally identical to the factory parts. They can be mix-matched with the factory type inner/outer lower control arm and shims.
The Elephant Racing inner arm is offered in two flavors, GT3 Street Inner Lower Control Arm and GT3 Cup Inner Lower Control Arm. GT3 street is equipped with a rubber bushed central bushing and the GT3 Cup is equipped with a solid caster adjustable central bushing.
Our GT3 Street Inner Lower Control Arm has sport-hardness rubber bushings to provide upgraded control and driver feedback while still offering good road noise isolation.
Our GT3 Cup Inner Lower Control Arms uses weather sealed spherical bearings. These deliver superior precision, control, and performance. They will transmit a bit more road noise than rubber bushings.
These can be paired with a choice of GT3 outer control lower arms:
– Elephant Racing GT3 Street Outer Lower Control Arms
– Elephant Racing GT3 Cup Outer Lower Control Arms
– Factory GT3 Street Outer Lower Control Arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180039
99634144190
2180039
99134105321
99134105301
99134105303
99134105302
99134105304
992407151D
992407151B
992407151E
992407151G
99634105306
99634105307
99634105316
99634105314
99634105317
99634105318
99634105319
99734105300
99734105303
99134105306
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp)
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp)
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche 992 Speedster 4.0L
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
£397.00
Now £389.06
Orderable
GT3 Adjustable outer lower control arms – 2 Piece. Porsche 992
Code: 2180042
GT3 Adjustable outer lower control arms – 2 Piece,
With rubber bushing.
Fits:
Porsche 992 Front Only
Does Not Fit 992 GT3
GT3 Lower Control Arms (LCA)
992 GT3 cars are equipped with a special front GT3 control arm that is two-piece and length-adjustable by fitting shims between the halves. The changeable length allows for aggressive camber settings and track width adjustment, increasing cornering grip and performance.
Unfortunately the stock 992 GT3 control arm cannot be fit to a non-GT3 992 because the ball joint end is completely different.
That’s why we created these GT3 type front lower control arms to fit the 992 C2, C4 and Turbo cars.
Our GT3 ERX LCAs for the 922 provides the same type front camber and track width adjustment for non-GT3 992 cars.
The GT3 ERX lower control arm is a system built up of three component parts, each ordered separately:
– GT3 ERX adjustable outer lower control arm
– GT3 adjustable inner lower control arm
– GT3 lower control arms shims (various thicknesses, stackable)
GT3 ERX Front Outer Lower Control Arms
Elephant Racing has developed an upgraded GT3 type front lower control arm for the non-GT3 992 cars. Our GT3 type arms have the correct ball joint style for fitment to 992 C2, C4 and Turbo cars. They do not fit 992 GT3 cars.
Like the factory lower control arms, the Elephant Racing outer arm has an integrated ball joint that is weather sealed. Unlike the factory lower control arms, the ball joint in the Elephant Racing arms is rebuildable and we offer the rebuild kit allowing you to renew the arm when needed.
The GT3 ERX LCAs have features to accept the factory height sensor and air deflectors.
The outer arms are sold as a left and right side pair, to be combined with our GT3 inner lower control arms – orderable separately.
These can be paired with a choice of GT3 lower control arms inner:
– Elephant Racing GT3 lower control arm inner rubber bushing
– Elephant Racing GT3 lower control arm inner spherical bearing
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180042
The product you are viewing cross references to these numbers
With rubber bushing.
Fits:
Porsche 992 Front Only
Does Not Fit 992 GT3
GT3 Lower Control Arms (LCA)
992 GT3 cars are equipped with a special front GT3 control arm that is two-piece and length-adjustable by fitting shims between the halves. The changeable length allows for aggressive camber settings and track width adjustment, increasing cornering grip and performance.
Unfortunately the stock 992 GT3 control arm cannot be fit to a non-GT3 992 because the ball joint end is completely different.
That’s why we created these GT3 type front lower control arms to fit the 992 C2, C4 and Turbo cars.
Our GT3 ERX LCAs for the 922 provides the same type front camber and track width adjustment for non-GT3 992 cars.
The GT3 ERX lower control arm is a system built up of three component parts, each ordered separately:
– GT3 ERX adjustable outer lower control arm
– GT3 adjustable inner lower control arm
– GT3 lower control arms shims (various thicknesses, stackable)
GT3 ERX Front Outer Lower Control Arms
Elephant Racing has developed an upgraded GT3 type front lower control arm for the non-GT3 992 cars. Our GT3 type arms have the correct ball joint style for fitment to 992 C2, C4 and Turbo cars. They do not fit 992 GT3 cars.
Like the factory lower control arms, the Elephant Racing outer arm has an integrated ball joint that is weather sealed. Unlike the factory lower control arms, the ball joint in the Elephant Racing arms is rebuildable and we offer the rebuild kit allowing you to renew the arm when needed.
The GT3 ERX LCAs have features to accept the factory height sensor and air deflectors.
The outer arms are sold as a left and right side pair, to be combined with our GT3 inner lower control arms – orderable separately.
These can be paired with a choice of GT3 lower control arms inner:
– Elephant Racing GT3 lower control arm inner rubber bushing
– Elephant Racing GT3 lower control arm inner spherical bearing
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180042
2180042
992407151G
992407151D
992407151B
992407151E
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche 992 Speedster 4.0L
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
£1,592.00
Now £1,560.16
Orderable
GT3 Adjustable outer lower control arms – 2 Piece. Porsche 991 / 992 / 981
Code: 2180044
GT3 Adjustable outer lower control arms – 2 Piece,
with adjustable caster puck.
Fits:
Porsche 991 Front Only (Does Not Fit 991 GT3)
Porsche 992 Front Only (Does Not Fit 992 GT3)
Porsche 981 Front And Rear
GT3 Lower Control Arms (LCA)
992 GT3 cars are equipped with a special front GT3 control arm that is two-piece and length-adjustable by fitting shims between the halves. The changeable length allows for aggressive camber settings and track width adjustment, increasing cornering grip and performance.
Unfortunately the stock 992 GT3 control arm cannot be fit to a non-GT3 992 because the ball joint end is completely different.
That’s why we created these GT3 type front lower control arms to fit the 992 C2, C4 and Turbo cars.
Our GT3 ERX LCAs for the 922 provides the same type front camber and track width adjustment for non-GT3 992 cars.
The GT3 ERX lower control arm is a system built up of three component parts, each ordered separately:
– GT3 ERX adjustable outer lower control arm
– GT3 adjustable inner lower control arm
– GT3 lower control arms shims (various thicknesses, stackable)
GT3 ERX Front Outer Lower Control Arms
Elephant Racing has developed an upgraded GT3 type front lower control arm for the non-GT3 992 cars. Our GT3 type arms have the correct ball joint style for fitment to 992 C2, C4 and Turbo cars. They do not fit 992 GT3 cars.
Like the factory lower control arms, the Elephant Racing outer arm has an integrated ball joint that is weather sealed. Unlike the factory lower control arms, the ball joint in the Elephant Racing arms is rebuildable and we offer the rebuild kit allowing you to renew the arm when needed.
The GT3 ERX LCAs have features to accept the factory height sensor and air deflectors.
The outer arms are sold as a left and right side pair, to be combined with our GT3 inner lower control arms – orderable separately.
These can be paired with a choice of GT3 lower control arms inner:
– Elephant Racing GT3 lower control arm inner rubber bushing
– Elephant Racing GT3 lower control arm inner spherical bearing
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180044
The product you are viewing cross references to these numbers
with adjustable caster puck.
Fits:
Porsche 991 Front Only (Does Not Fit 991 GT3)
Porsche 992 Front Only (Does Not Fit 992 GT3)
Porsche 981 Front And Rear
GT3 Lower Control Arms (LCA)
992 GT3 cars are equipped with a special front GT3 control arm that is two-piece and length-adjustable by fitting shims between the halves. The changeable length allows for aggressive camber settings and track width adjustment, increasing cornering grip and performance.
Unfortunately the stock 992 GT3 control arm cannot be fit to a non-GT3 992 because the ball joint end is completely different.
That’s why we created these GT3 type front lower control arms to fit the 992 C2, C4 and Turbo cars.
Our GT3 ERX LCAs for the 922 provides the same type front camber and track width adjustment for non-GT3 992 cars.
The GT3 ERX lower control arm is a system built up of three component parts, each ordered separately:
– GT3 ERX adjustable outer lower control arm
– GT3 adjustable inner lower control arm
– GT3 lower control arms shims (various thicknesses, stackable)
GT3 ERX Front Outer Lower Control Arms
Elephant Racing has developed an upgraded GT3 type front lower control arm for the non-GT3 992 cars. Our GT3 type arms have the correct ball joint style for fitment to 992 C2, C4 and Turbo cars. They do not fit 992 GT3 cars.
Like the factory lower control arms, the Elephant Racing outer arm has an integrated ball joint that is weather sealed. Unlike the factory lower control arms, the ball joint in the Elephant Racing arms is rebuildable and we offer the rebuild kit allowing you to renew the arm when needed.
The GT3 ERX LCAs have features to accept the factory height sensor and air deflectors.
The outer arms are sold as a left and right side pair, to be combined with our GT3 inner lower control arms – orderable separately.
These can be paired with a choice of GT3 lower control arms inner:
– Elephant Racing GT3 lower control arm inner rubber bushing
– Elephant Racing GT3 lower control arm inner spherical bearing
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180044
2180044
992407151G
99134105321
99134105301
99134105303
99134105302
99134105304
992407151D
992407151B
992407151E
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche 992 Speedster 4.0L
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
£1,592.00
Now £1,560.16
Orderable
Shock absorber mounting kit rear. Porsche 964
Code: 21522
Shock absorber mounting kit rear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21522
The product you are viewing cross references to these numbers
sold as a pair
Fits:
Porsche 964 - 1989 to 1994
Upper Rear Shock Mounts
These shock absorber mounts use high strength hardened steel spherical bearings and are direct replacements for the factory mounts. The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication and the included seals prevent contamination from water or grime, thus extending bearing life.
This kit is intended to work with coilover setups, however it can be adapted to work with factory or lowering springs. Please give us a call for more detail. It is also suited to work perfectly with Von Coilover systems or other similar solutions.
Fully Weather Sealed
We’ve designed in weather seals on the top and bottom to keep dirt out and extend product life. This is the only shock mount suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.
Improved Shock / Coilover Performance
The spherical bearing in these Elephant Racing shock mounts pivot freely and eliminate deflection that is inherent with factory-style rubber shock mounts. This is important for the following reason:
A factory rubber mount acts as a spring in series with the shock. The factory mount’s rubber spring-action is completely un-damped and reduces a shock’s ability to control tyre contact patch. Our spherical bearing shock mounts allow the shock damper to do its job and effectively control the tire’s contact patch for predictable driving in all road/weather conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
21522
96433306404
96433305900
96433305982
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Prices from: £536.26
Central Rubber bush for lower control arm / wishbone. EACH
Code: 22900
Central Rubber bush for lower control arm / wishbone. Sold as EACH
Fits:
Stock hardness
Porsche 986 Boxster (front and rear)
Porsche 987 Boxster / Cayman (rear)
Porsche 981 Boxster / Cayman (front and rear)
Porsche 997 (rear)
Sport hardness
Porsche 986 Boxster - 1999 to 2005 (front and rear)
Porsche 987 Boxster / Cayman - (rear)
Porsche 996 - 1999 to 2005 (front and rear)
Porsche 996 GT3 / GT2 - (front and rear)
Porsche 997 (rear)
Porsche 997 GT3 / GT2 (front and rear)
Central Rubber bushings for lower wishbones are available in a choice of “stock” and “sport”. The sport bushings are a harder rubber compound that deforms less under load, providing improved precision and feedback. Stock is stock-spec rubber and delivers factory original ride and performance
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
22900
2290014
2290022
99634105306
99634105307
99634105316
99634105314
99634105317
99634105318
99634105319
99734105300
99734105303
99134105302
99134105304
99134105306
99134105321
99134105301
99134105303
992407151D
992407151B
992407151E
992407151G
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
Prices from: £98.00
Rear shock mount kit. Porsche 991 2012>>
Code: 2152208
Rear shock mount kit.
1 kit, req'd per car
Fits:
Porsche 991 12>> w/ coilovers or shocks
These shock mounts use high strength hardened steel spherical bearings and are direct replacements for the factory mounts. The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication. Included seals prevent contamination from water or grime, thus extending bearing life.
Porsche used spherical bearings on the 991 GT3 and Cup Cars. We went one step further and added larger bearings and weather-seals to ensure longevity.
Fully Weather Sealed
We’ve designed in weather seals to keep dirt out and extend product life. This is the only shock mount suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.
Improved shock / coilover performance
The spherical bearings pivot freely and eliminate the deflection that is inherent with the factory rubber bushings.
This is important for two reasons:
– The factory rubber acts as a spring in series with the shock. This rubber spring-action is completely un-damped and reduces the shocks ability to control the tire contact patch. The spherical bearing allows the damper to do its job and control the contact patch.
– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
These will work with stock springs and coilover suspensions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2152208
The product you are viewing cross references to these numbers
1 kit, req'd per car
Fits:
Porsche 991 12>> w/ coilovers or shocks
These shock mounts use high strength hardened steel spherical bearings and are direct replacements for the factory mounts. The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication. Included seals prevent contamination from water or grime, thus extending bearing life.
Porsche used spherical bearings on the 991 GT3 and Cup Cars. We went one step further and added larger bearings and weather-seals to ensure longevity.
Fully Weather Sealed
We’ve designed in weather seals to keep dirt out and extend product life. This is the only shock mount suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.
Improved shock / coilover performance
The spherical bearings pivot freely and eliminate the deflection that is inherent with the factory rubber bushings.
This is important for two reasons:
– The factory rubber acts as a spring in series with the shock. This rubber spring-action is completely un-damped and reduces the shocks ability to control the tire contact patch. The spherical bearing allows the damper to do its job and control the contact patch.
– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
These will work with stock springs and coilover suspensions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2152208
99133316100
99133316101
9P1513353
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
£620.00
Now £607.60
Orderable
Coilover sleeve conversions kit, Rear. Porsche 991 / 981
Code: 232004
Coilover sleeve conversions kit, Rear.
Sold as Pair, 1 pair required per axle.
Fits:
Porsche 911 2012>>
Porsche 981 Boxster / Cayman 2013>>
Adjustable Coilover Conversion
Conversion kits provide a cost-effect way to convert to a full height adjustable coilover setup while retaining your existing non-threaded OEM PASM or Standard struts and shocks. Our no-weld kit converts to a full adjustable height coilover setup.
Seat Bearing Kit – Prevents spring wind-up allowing ease-of-steering.
Main Spring – The finest springs available, Hypercoil. Choose from a broad selection of rates, here are a few popular choices:
• Level 1 – Street performance, canyon carver
• Level 2 – Autocross, Drivers Education
• Level 3 – Track
Coilover Conversion Kit Contents:
Threaded Sleeve – Provides height adjustability. Compact design fits 2.25 inch springs for superior tire clearance.
Lower Perch – Easy height adjustment and corner balancing. Clamp-type is secure and kind to threads.
Sleeve Base – Bolts on and positions threaded sleeve, no welding required.
Helper Spring / Dividers – Prevents Main Spring from coming off perches at full suspension droop. Fully compressed in normal operation. Divider ensures Main Spring and Helper Spring remain properly seated.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
232004
The product you are viewing cross references to these numbers
Sold as Pair, 1 pair required per axle.
Fits:
Porsche 911 2012>>
Porsche 981 Boxster / Cayman 2013>>
Adjustable Coilover Conversion
Conversion kits provide a cost-effect way to convert to a full height adjustable coilover setup while retaining your existing non-threaded OEM PASM or Standard struts and shocks. Our no-weld kit converts to a full adjustable height coilover setup.
Seat Bearing Kit – Prevents spring wind-up allowing ease-of-steering.
Main Spring – The finest springs available, Hypercoil. Choose from a broad selection of rates, here are a few popular choices:
• Level 1 – Street performance, canyon carver
• Level 2 – Autocross, Drivers Education
• Level 3 – Track
Coilover Conversion Kit Contents:
Threaded Sleeve – Provides height adjustability. Compact design fits 2.25 inch springs for superior tire clearance.
Lower Perch – Easy height adjustment and corner balancing. Clamp-type is secure and kind to threads.
Sleeve Base – Bolts on and positions threaded sleeve, no welding required.
Helper Spring / Dividers – Prevents Main Spring from coming off perches at full suspension droop. Fully compressed in normal operation. Divider ensures Main Spring and Helper Spring remain properly seated.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
232004
2320041
2320042
2320043
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Prices from: £808.50
Coilover sleeve conversions kit, Front. Porsche 991 / 981
Code: 232003
Coilover sleeve conversions kit, Front.
Sold as Pair, 1 pair required per axle.
Fits:
Porsche 911 2012>>
Porsche 981 Boxster / Cayman 2013>>
Adjustable Coilover Conversion
Conversion kits provide a cost-effect way to convert to a full height adjustable coilover setup while retaining your existing non-threaded OEM PASM or Standard struts and shocks. Our no-weld kit converts to a full adjustable height coilover setup.
Seat Bearing Kit – Prevents spring wind-up allowing ease-of-steering.
Main Spring – The finest springs available, Hypercoil. Choose from a broad selection of rates, here are a few popular choices:
• Level 1 – Street performance, canyon carver
• Level 2 – Autocross, Drivers Education
• Level 3 – Track
Coilover Conversion Kit Contents:
Threaded Sleeve – Provides height adjustability. Compact design fits 2.25 inch springs for superior tire clearance.
Lower Perch – Easy height adjustment and corner balancing. Clamp-type is secure and kind to threads.
Sleeve Base – Bolts on and positions threaded sleeve, no welding required.
Helper Spring / Dividers – Prevents Main Spring from coming off perches at full suspension droop. Fully compressed in normal operation. Divider ensures Main Spring and Helper Spring remain properly seated.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
232003
The product you are viewing cross references to these numbers
Sold as Pair, 1 pair required per axle.
Fits:
Porsche 911 2012>>
Porsche 981 Boxster / Cayman 2013>>
Adjustable Coilover Conversion
Conversion kits provide a cost-effect way to convert to a full height adjustable coilover setup while retaining your existing non-threaded OEM PASM or Standard struts and shocks. Our no-weld kit converts to a full adjustable height coilover setup.
Seat Bearing Kit – Prevents spring wind-up allowing ease-of-steering.
Main Spring – The finest springs available, Hypercoil. Choose from a broad selection of rates, here are a few popular choices:
• Level 1 – Street performance, canyon carver
• Level 2 – Autocross, Drivers Education
• Level 3 – Track
Coilover Conversion Kit Contents:
Threaded Sleeve – Provides height adjustability. Compact design fits 2.25 inch springs for superior tire clearance.
Lower Perch – Easy height adjustment and corner balancing. Clamp-type is secure and kind to threads.
Sleeve Base – Bolts on and positions threaded sleeve, no welding required.
Helper Spring / Dividers – Prevents Main Spring from coming off perches at full suspension droop. Fully compressed in normal operation. Divider ensures Main Spring and Helper Spring remain properly seated.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
232003
2320031
2320032
2320033
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Prices from: £808.50
Front control arm bearings PolyBronze. Porsche 911 / 912 / 930 / 914
Code: 2051500
PolyBronze control arm bearings, Front.
Price is per kit. 1 kit req'd per car.
Fits:
Porsche 911 / 912 / 930 1968-89
Porsche 914
PolyBronze bearings are superior to plastic bushing alternatives, here's why:
Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is "grippy" with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tire adhesion.
PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.
The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality.
PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.
✔ No squeaks or binding
✔ Extremely smooth ride quality
✔ Easier to install than rubber bushings
✔ Integrated grease fittings and grooves
FRONT
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2051500
The product you are viewing cross references to these numbers
Price is per kit. 1 kit req'd per car.
Fits:
Porsche 911 / 912 / 930 1968-89
Porsche 914
PolyBronze bearings are superior to plastic bushing alternatives, here's why:
Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is "grippy" with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tire adhesion.
PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.
The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality.
PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.
✔ No squeaks or binding
✔ Extremely smooth ride quality
✔ Easier to install than rubber bushings
✔ Integrated grease fittings and grooves
FRONT
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2051500
2051500
91134190101
91134190201
91434142202
91134190100
91134190200
93034190101
93034190201
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£322.20
Now £315.76
Arriving soon
Suspension system front replacement arms for 2180010 Porsche 911 / 914 GT3 style
Code: 2180016-SA
Adjustable lower control arms (lower wishbone)
This is the replacement Control arms for the 2180010 kit.
GT3 Front Suspension System. The Ultimate Front Suspension System
Our GT3 front suspension delivers superior grip and ride quality.
We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.
Ease of adjustment
Easily adjust camber, caster and even track width.
Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.
Low friction, spherical action
Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.
Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.
Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.
Weathersealed
Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.
Improved Geometry and subframe
Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.
Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.
Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.
Fit and finish
Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.
The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180016-SA
The product you are viewing cross references to these numbers
This is the replacement Control arms for the 2180010 kit.
GT3 Front Suspension System. The Ultimate Front Suspension System
Our GT3 front suspension delivers superior grip and ride quality.
We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.
Ease of adjustment
Easily adjust camber, caster and even track width.
Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.
Low friction, spherical action
Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.
Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.
Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.
Weathersealed
Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.
Improved Geometry and subframe
Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.
Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.
Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.
Fit and finish
Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.
The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180016-SA
2180016-SA
2180010
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£1,250.00
Now £1,225.00
Orderable
Front extended upper perches. Porsche 911 / 912 / 930 / 914 1965-89
Code: 2280904
Front extended upper perches.
for stock and offset camber plates
1 kit, req'd per car.
Fits:
Porsche 911 / 912 / 930 / 914 1965-1989
Product description:
Coilover springs increase the diameter of front struts, often contacting the chassis such that the spring diameter limits the available camber adjustment range.
These extended-length upper spring perches solve the problem by moving the spring down where it won't contact the chassis.
Some cars can get over a degree of added camber adjustment range.
Extended-length perches are available for 2.25″ springs. You can add a 2.25″ to 2.5″ adaptor to use with 2.5″ springs.
Available with a 26mm ID for use only with QuickChange camber plates and with a 16mm ID for use with conventional camber plates.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2280904
The product you are viewing cross references to these numbers
for stock and offset camber plates
1 kit, req'd per car.
Fits:
Porsche 911 / 912 / 930 / 914 1965-1989
Product description:
Coilover springs increase the diameter of front struts, often contacting the chassis such that the spring diameter limits the available camber adjustment range.
These extended-length upper spring perches solve the problem by moving the spring down where it won't contact the chassis.
Some cars can get over a degree of added camber adjustment range.
Extended-length perches are available for 2.25″ springs. You can add a 2.25″ to 2.5″ adaptor to use with 2.5″ springs.
Available with a 26mm ID for use only with QuickChange camber plates and with a 16mm ID for use with conventional camber plates.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2280904
2152200
2280902
2280904
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£205.00
Now £200.90
Orderable
Front extended upper perches. Porsche 911 / 912 / 930 / 914 1965-89
Code: 2280902
Front extended upper perches.
use ONLY with QuickChange camber plates 2152200
1 kit, req'd per car.
Fits:
Porsche 911 / 912 / 930 / 914 1965-1989
Product description:
Coilover springs increase the diameter of front struts, often contacting the chassis such that the spring diameter limits the available camber adjustment range.
These extended-length upper spring perches solve the problem by moving the spring down where it won't contact the chassis.
Some cars can get over a degree of added camber adjustment range.
Extended-length perches are available for 2.25″ springs. You can add a 2.25″ to 2.5″ adaptor to use with 2.5″ springs.
Available with a 26mm ID for use only with QuickChange camber plates and with a 16mm ID for use with conventional camber plates.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2280902
The product you are viewing cross references to these numbers
use ONLY with QuickChange camber plates 2152200
1 kit, req'd per car.
Fits:
Porsche 911 / 912 / 930 / 914 1965-1989
Product description:
Coilover springs increase the diameter of front struts, often contacting the chassis such that the spring diameter limits the available camber adjustment range.
These extended-length upper spring perches solve the problem by moving the spring down where it won't contact the chassis.
Some cars can get over a degree of added camber adjustment range.
Extended-length perches are available for 2.25″ springs. You can add a 2.25″ to 2.5″ adaptor to use with 2.5″ springs.
Available with a 26mm ID for use only with QuickChange camber plates and with a 16mm ID for use with conventional camber plates.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2280902
2152200
2280902
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£195.00
Now £191.10
Orderable
Brake calipers Rear 930-ERX. Porsche 930 75-89
Code: G-2190017
930-ERX Rear brake calipers.
1 pair, req'd per car.
We've re-engineered a 930 style caliper with specific enhancements for direct fitment to the 911. Our 930-ERX calipers are an updated version of the venerable 930 brakes which have long been the benchmark for performance.
Fits:
Porsche 930 1975-89 930 W/ 3.5" Caliper Bolt Spacing
The 930 Brake Upgrade
930 brakes have been an awesome upgrade for 911 cars in terms of thermal capacity and pedal feel. The four piston calipers and massive 32mm front / 28mm rear rotors give incredible stopping power.
In addition to excellent stopping power, they have a period correct retro race look, retain the parking brake functionality, and even fit under many 15 inch wheels. This is why 930 brakes have traditionally been the sought-after upgrade for 911 racecars, and high end/high powered street car builds.
However fitting them has traditionally been difficult – requiring custom machining (due to differences in 930/911 caliper bolt spacing), wheel clearance issues, and limited availability.
Our re-engineered 930-ERX type calipers keep everything that's great while fixing all the issues. And they accept readily-available 930 type pads, rotors, and master cylinders.
930-ERX Enhancements over Original 930 Calipers
✓ No caliper machining is required for 911 trailing arm fitment.
✓ Our rear calipers have the correct 3.0 inch bolt spacing and radial position to mount directly onto '69-'89 911/912 trailing arms.
✓ The front and rear caliper cooling fins are low profile such that they do not interfere with Fuchs wheel spokes without the need for wheel spacers.
✓ A modern staggered piston design is used for even pad wear on our 930-ERX calipers. Original 930 calipers used same size pistons, which caused pads to wear in a taper.
930-ERX Fitment and Compatibility
The front calipers have 3.5 inch bolt spacing and bolt directly to front struts as equipped on 911 and 912 cars from '72-'89 and 911 S models prior to '72. Early front struts that have 3.0 caliper bolt spacing can convert to 3.5 inch struts, contact us for details.
The rear calipers have 3.0 bolt spacing for direct fitment to 911 and 912 trailing arms from '69-'89 including aluminium and steel trailing arms.
Front and rear calipers accept standard 930 brake pads and standard 911 brake hoses.
Rear calipers use standard type 930 rotors part 930-352-046-01
Front calipers fit with regular 911 hubs and use early type 930 floating rotors with our hat kit #2190005 (floating) or #2190010 (fixed), or late 930 hubs with late 930 fixed rotors.
Use standard 930 master cylinder on '77-'89 911 cars equipped with brake booster, or our master cylinder kit #2190011 for pre-77 cars with non-boosted brakes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
G-2190017
The product you are viewing cross references to these numbers
1 pair, req'd per car.
We've re-engineered a 930 style caliper with specific enhancements for direct fitment to the 911. Our 930-ERX calipers are an updated version of the venerable 930 brakes which have long been the benchmark for performance.
Fits:
Porsche 930 1975-89 930 W/ 3.5" Caliper Bolt Spacing
The 930 Brake Upgrade
930 brakes have been an awesome upgrade for 911 cars in terms of thermal capacity and pedal feel. The four piston calipers and massive 32mm front / 28mm rear rotors give incredible stopping power.
In addition to excellent stopping power, they have a period correct retro race look, retain the parking brake functionality, and even fit under many 15 inch wheels. This is why 930 brakes have traditionally been the sought-after upgrade for 911 racecars, and high end/high powered street car builds.
However fitting them has traditionally been difficult – requiring custom machining (due to differences in 930/911 caliper bolt spacing), wheel clearance issues, and limited availability.
Our re-engineered 930-ERX type calipers keep everything that's great while fixing all the issues. And they accept readily-available 930 type pads, rotors, and master cylinders.
930-ERX Enhancements over Original 930 Calipers
✓ No caliper machining is required for 911 trailing arm fitment.
✓ Our rear calipers have the correct 3.0 inch bolt spacing and radial position to mount directly onto '69-'89 911/912 trailing arms.
✓ The front and rear caliper cooling fins are low profile such that they do not interfere with Fuchs wheel spokes without the need for wheel spacers.
✓ A modern staggered piston design is used for even pad wear on our 930-ERX calipers. Original 930 calipers used same size pistons, which caused pads to wear in a taper.
930-ERX Fitment and Compatibility
The front calipers have 3.5 inch bolt spacing and bolt directly to front struts as equipped on 911 and 912 cars from '72-'89 and 911 S models prior to '72. Early front struts that have 3.0 caliper bolt spacing can convert to 3.5 inch struts, contact us for details.
The rear calipers have 3.0 bolt spacing for direct fitment to 911 and 912 trailing arms from '69-'89 including aluminium and steel trailing arms.
Front and rear calipers accept standard 930 brake pads and standard 911 brake hoses.
Rear calipers use standard type 930 rotors part 930-352-046-01
Front calipers fit with regular 911 hubs and use early type 930 floating rotors with our hat kit #2190005 (floating) or #2190010 (fixed), or late 930 hubs with late 930 fixed rotors.
Use standard 930 master cylinder on '77-'89 911 cars equipped with brake booster, or our master cylinder kit #2190011 for pre-77 cars with non-boosted brakes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
G-2190017
2190017
90135196411
91135290800
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£2,594.00
Now £2,542.12
Orderable
Brake calipers Rear 930-ERX. Porsche 911 / 912 69-89
Code: G-2190007
930-ERX Rear brake calipers.
1 pair, req'd per car.
We've re-engineered a 930 style caliper with specific enhancements for direct fitment to the 911. Our 930-ERX calipers are an updated version of the venerable 930 brakes which have long been the benchmark for performance.
Fits:
Porsche 911 / 912 1969-89
W/ 3" Caliper Bolt Spacing
The 930 Brake Upgrade
930 brakes have been an awesome upgrade for 911 cars in terms of thermal capacity and pedal feel. The four piston calipers and massive 32mm front / 28mm rear rotors give incredible stopping power.
In addition to excellent stopping power, they have a period correct retro race look, retain the parking brake functionality, and even fit under many 15 inch wheels. This is why 930 brakes have traditionally been the sought-after upgrade for 911 racecars, and high end/high powered street car builds.
However fitting them has traditionally been difficult – requiring custom machining (due to differences in 930/911 caliper bolt spacing), wheel clearance issues, and limited availability.
Our re-engineered 930-ERX type calipers keep everything that's great while fixing all the issues. And they accept readily-available 930 type pads, rotors, and master cylinders.
930-ERX Enhancements over Original 930 Calipers
✓ No caliper machining is required for 911 trailing arm fitment.
✓ Our rear calipers have the correct 3.0 inch bolt spacing and radial position to mount directly onto '69-'89 911/912 trailing arms.
✓ The front and rear caliper cooling fins are low profile such that they do not interfere with Fuchs wheel spokes without the need for wheel spacers.
✓ A modern staggered piston design is used for even pad wear on our 930-ERX calipers. Original 930 calipers used same size pistons, which caused pads to wear in a taper.
930-ERX Fitment and Compatibility
The front calipers have 3.5 inch bolt spacing and bolt directly to front struts as equipped on 911 and 912 cars from '72-'89 and 911 S models prior to '72. Early front struts that have 3.0 caliper bolt spacing can convert to 3.5 inch struts, contact us for details.
The rear calipers have 3.0 bolt spacing for direct fitment to 911 and 912 trailing arms from '69-'89 including aluminium and steel trailing arms.
Front and rear calipers accept standard 930 brake pads and standard 911 brake hoses.
Rear calipers use standard type 930 rotors part 930-352-046-01
Front calipers fit with regular 911 hubs and use early type 930 floating rotors with our hat kit #2190005 (floating) or #2190010 (fixed), or late 930 hubs with late 930 fixed rotors.
Use standard 930 master cylinder on '77-'89 911 cars equipped with brake booster, or our master cylinder kit #2190011 for pre-77 cars with non-boosted brakes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
G-2190007
The product you are viewing cross references to these numbers
1 pair, req'd per car.
We've re-engineered a 930 style caliper with specific enhancements for direct fitment to the 911. Our 930-ERX calipers are an updated version of the venerable 930 brakes which have long been the benchmark for performance.
Fits:
Porsche 911 / 912 1969-89
W/ 3" Caliper Bolt Spacing
The 930 Brake Upgrade
930 brakes have been an awesome upgrade for 911 cars in terms of thermal capacity and pedal feel. The four piston calipers and massive 32mm front / 28mm rear rotors give incredible stopping power.
In addition to excellent stopping power, they have a period correct retro race look, retain the parking brake functionality, and even fit under many 15 inch wheels. This is why 930 brakes have traditionally been the sought-after upgrade for 911 racecars, and high end/high powered street car builds.
However fitting them has traditionally been difficult – requiring custom machining (due to differences in 930/911 caliper bolt spacing), wheel clearance issues, and limited availability.
Our re-engineered 930-ERX type calipers keep everything that's great while fixing all the issues. And they accept readily-available 930 type pads, rotors, and master cylinders.
930-ERX Enhancements over Original 930 Calipers
✓ No caliper machining is required for 911 trailing arm fitment.
✓ Our rear calipers have the correct 3.0 inch bolt spacing and radial position to mount directly onto '69-'89 911/912 trailing arms.
✓ The front and rear caliper cooling fins are low profile such that they do not interfere with Fuchs wheel spokes without the need for wheel spacers.
✓ A modern staggered piston design is used for even pad wear on our 930-ERX calipers. Original 930 calipers used same size pistons, which caused pads to wear in a taper.
930-ERX Fitment and Compatibility
The front calipers have 3.5 inch bolt spacing and bolt directly to front struts as equipped on 911 and 912 cars from '72-'89 and 911 S models prior to '72. Early front struts that have 3.0 caliper bolt spacing can convert to 3.5 inch struts, contact us for details.
The rear calipers have 3.0 bolt spacing for direct fitment to 911 and 912 trailing arms from '69-'89 including aluminium and steel trailing arms.
Front and rear calipers accept standard 930 brake pads and standard 911 brake hoses.
Rear calipers use standard type 930 rotors part 930-352-046-01
Front calipers fit with regular 911 hubs and use early type 930 floating rotors with our hat kit #2190005 (floating) or #2190010 (fixed), or late 930 hubs with late 930 fixed rotors.
Use standard 930 master cylinder on '77-'89 911 cars equipped with brake booster, or our master cylinder kit #2190011 for pre-77 cars with non-boosted brakes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
G-2190007
2190007
91135242500
91135240600
91135290700
91135290800
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
£2,795.00
Now £2,739.10
Orderable
Brake calipers front 930-ERX. Porsche 911 / 912 / 930
Code: G-2190006
930-ERX Front brake calipers.
1 pair, req'd per car.
We've re-engineered a 930 style caliper with specific enhancements for direct fitment to the 911. Our 930-ERX calipers are an updated version of the venerable 930 brakes which have long been the benchmark for performance.
Fits:
Porsche 911 / 912 / 930
*** For 1965-73 use 3.5" spacing struts
The 930 Brake Upgrade
930 brakes have been an awesome upgrade for 911 cars in terms of thermal capacity and pedal feel. The four piston calipers and massive 32mm front / 28mm rear rotors give incredible stopping power.
In addition to excellent stopping power, they have a period correct retro race look, retain the parking brake functionality, and even fit under many 15 inch wheels. This is why 930 brakes have traditionally been the sought-after upgrade for 911 racecars, and high end/high powered street car builds.
However fitting them has traditionally been difficult – requiring custom machining (due to differences in 930/911 caliper bolt spacing), wheel clearance issues, and limited availability.
Our re-engineered 930-ERX type calipers keep everything that's great while fixing all the issues. And they accept readily-available 930 type pads, rotors, and master cylinders.
930-ERX Enhancements over Original 930 Calipers
✓ No caliper machining is required for 911 trailing arm fitment.
✓ Our rear calipers have the correct 3.0 inch bolt spacing and radial position to mount directly onto '69-'89 911/912 trailing arms.
✓ The front and rear caliper cooling fins are low profile such that they do not interfere with Fuchs wheel spokes without the need for wheel spacers.
✓ A modern staggered piston design is used for even pad wear on our 930-ERX calipers. Original 930 calipers used same size pistons, which caused pads to wear in a taper.
930-ERX Fitment and Compatibility
The front calipers have 3.5 inch bolt spacing and bolt directly to front struts as equipped on 911 and 912 cars from '72-'89 and 911 S models prior to '72. Early front struts that have 3.0 caliper bolt spacing can convert to 3.5 inch struts, contact us for details.
The rear calipers have 3.0 bolt spacing for direct fitment to 911 and 912 trailing arms from '69-'89 including aluminium and steel trailing arms.
Front and rear calipers accept standard 930 brake pads and standard 911 brake hoses.
Rear calipers use standard type 930 rotors part 930-352-046-01
Front calipers fit with regular 911 hubs and use early type 930 floating rotors with our hat kit #2190005 (floating) or #2190010 (fixed), or late 930 hubs with late 930 fixed rotors.
Use standard 930 master cylinder on '77-'89 911 cars equipped with brake booster, or our master cylinder kit #2190011 for pre-77 cars with non-boosted brakes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
G-2190006
The product you are viewing cross references to these numbers
1 pair, req'd per car.
We've re-engineered a 930 style caliper with specific enhancements for direct fitment to the 911. Our 930-ERX calipers are an updated version of the venerable 930 brakes which have long been the benchmark for performance.
Fits:
Porsche 911 / 912 / 930
*** For 1965-73 use 3.5" spacing struts
The 930 Brake Upgrade
930 brakes have been an awesome upgrade for 911 cars in terms of thermal capacity and pedal feel. The four piston calipers and massive 32mm front / 28mm rear rotors give incredible stopping power.
In addition to excellent stopping power, they have a period correct retro race look, retain the parking brake functionality, and even fit under many 15 inch wheels. This is why 930 brakes have traditionally been the sought-after upgrade for 911 racecars, and high end/high powered street car builds.
However fitting them has traditionally been difficult – requiring custom machining (due to differences in 930/911 caliper bolt spacing), wheel clearance issues, and limited availability.
Our re-engineered 930-ERX type calipers keep everything that's great while fixing all the issues. And they accept readily-available 930 type pads, rotors, and master cylinders.
930-ERX Enhancements over Original 930 Calipers
✓ No caliper machining is required for 911 trailing arm fitment.
✓ Our rear calipers have the correct 3.0 inch bolt spacing and radial position to mount directly onto '69-'89 911/912 trailing arms.
✓ The front and rear caliper cooling fins are low profile such that they do not interfere with Fuchs wheel spokes without the need for wheel spacers.
✓ A modern staggered piston design is used for even pad wear on our 930-ERX calipers. Original 930 calipers used same size pistons, which caused pads to wear in a taper.
930-ERX Fitment and Compatibility
The front calipers have 3.5 inch bolt spacing and bolt directly to front struts as equipped on 911 and 912 cars from '72-'89 and 911 S models prior to '72. Early front struts that have 3.0 caliper bolt spacing can convert to 3.5 inch struts, contact us for details.
The rear calipers have 3.0 bolt spacing for direct fitment to 911 and 912 trailing arms from '69-'89 including aluminium and steel trailing arms.
Front and rear calipers accept standard 930 brake pads and standard 911 brake hoses.
Rear calipers use standard type 930 rotors part 930-352-046-01
Front calipers fit with regular 911 hubs and use early type 930 floating rotors with our hat kit #2190005 (floating) or #2190010 (fixed), or late 930 hubs with late 930 fixed rotors.
Use standard 930 master cylinder on '77-'89 911 cars equipped with brake booster, or our master cylinder kit #2190011 for pre-77 cars with non-boosted brakes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
G-2190006
90135197510
91135193500
91135193600
90135197610
91135190700
91135190800
91135142502
91135142602
91135142503
91135142603
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£2,675.00
Now £2,621.50
Orderable
Adjustable rear sway bar drop links. Porsche 991 C2 / 991 C4
Code: 2271004
Adjustable front sway bar drop links.
1 kit required per car
Fits
Porsche 991.1 and 991.2 C2
Porsche 991.1 and 991.2 C4
NOT FOR PDDC
Adjustable Drop Links
The ideal sway bar (anti roll bar) is completely unloaded at static ride height. Stock drops links almost always preload the sway bar since the car doesn't sit perfectly level due to asymmetries such as driver weight. Our front and rear adjustable-length drop links for C4/C2 allow you to eliminate preload of the sway bar for maximum performance.
A preloaded sway bar shifts the weight carried by each of the tyres, increasing grip on weighted ones at the expense of decreasing grip on un-weighted ones. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tyre locks up first. Preload can be completely eliminated by adjusting drop link length and sway bar performance optimized.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271004
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 991.1 and 991.2 C2
Porsche 991.1 and 991.2 C4
NOT FOR PDDC
Adjustable Drop Links
The ideal sway bar (anti roll bar) is completely unloaded at static ride height. Stock drops links almost always preload the sway bar since the car doesn't sit perfectly level due to asymmetries such as driver weight. Our front and rear adjustable-length drop links for C4/C2 allow you to eliminate preload of the sway bar for maximum performance.
A preloaded sway bar shifts the weight carried by each of the tyres, increasing grip on weighted ones at the expense of decreasing grip on un-weighted ones. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tyre locks up first. Preload can be completely eliminated by adjusting drop link length and sway bar performance optimized.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271004
2271004
99133307180
99133307280
99133307102
9P1511467A
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
£330.00
Now £323.40
Orderable
Adjustable rear sway bar drop links. Porsche 991 GT3 / 991 GT3 RS
Code: 2271019
Adjustable front sway bar drop links.
1 kit required per car
Fits
Porsche 991 GT3
Porsche 991 GT3 RS
Adjustable Drop Links
The ideal sway bar (anti roll bar) is completely unloaded at static ride height. Stock drops links almost always preload the sway bar since the car doesn't sit perfectly level due to asymmetries such as driver weight. Our front and rear adjustable-length drop links for C4/C2 allow you to eliminate preload of the sway bar for maximum performance.
A preloaded sway bar shifts the weight carried by each of the tyres, increasing grip on weighted ones at the expense of decreasing grip on un-weighted ones. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tyre locks up first. Preload can be completely eliminated by adjusting drop link length and sway bar performance optimized.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271019
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 991 GT3
Porsche 991 GT3 RS
Adjustable Drop Links
The ideal sway bar (anti roll bar) is completely unloaded at static ride height. Stock drops links almost always preload the sway bar since the car doesn't sit perfectly level due to asymmetries such as driver weight. Our front and rear adjustable-length drop links for C4/C2 allow you to eliminate preload of the sway bar for maximum performance.
A preloaded sway bar shifts the weight carried by each of the tyres, increasing grip on weighted ones at the expense of decreasing grip on un-weighted ones. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tyre locks up first. Preload can be completely eliminated by adjusting drop link length and sway bar performance optimized.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271019
2271019
99133307180
99133307280
99133307102
9P1511467A
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
£365.00
Now £357.70
Orderable
Sway bar backdate mounting kit. Porsche 911 / 912 / 930 / 914
Code: 2270025_2270024
Sway bar backdate mounting kit
1 kit required per car
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
When installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.
• Required For Through-Body Sway bar Conversions
• Not required for Elephant Racing Blade Type Sway bars
• Welding required for proper installation
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2270025_2270024
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
When installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.
• Required For Through-Body Sway bar Conversions
• Not required for Elephant Racing Blade Type Sway bars
• Welding required for proper installation
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2270025_2270024
2270025_2270024
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£72.00
Now £70.56
Orderable
Front and Rear QuickChange™ Blade Style Sway bar. Porsche 911 / 912 / 930 / 914
Code: 227002
Front QuickChange™ Blade Style Sway bar
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Front and Rear QuickChange™ Blade Style Sway Bar System
Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.
Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.
The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts
Perfect Geometry
Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.
Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.
Lightweight
Hollow bar reduces weight.
Fast and Easy Adjustment
No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.
For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
227002
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Front and Rear QuickChange™ Blade Style Sway Bar System
Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.
Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.
The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts
Perfect Geometry
Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.
Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.
Lightweight
Hollow bar reduces weight.
Fast and Easy Adjustment
No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.
For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
227002
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
2270020
2270022
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £1,372.00
Sway bar mounting backer plate kit. Porsche 911 / 912 / 930 / 914
Code: 2270024
Sway bar mounting backer plate kit
1 kit required per car
Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2270024
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2270024
2270024
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£55.00
Now £53.90
In stock
Adjustable front sway bar drop links. Porsche 991
Code: 2271003
Adjustable front sway bar drop links.
1 kit required per car
Fits
Porsche 991.1 and 991.2 C2
Porsche 991.1 and 991.2 C4
Porsche 991 GT3
Porsche 991 GT3 RS
NOT FOR PDDC
Adjustable Drop Links
The ideal sway bar (anti roll bar) is completely unloaded at static ride height. Stock drop links almost always preload the sway bar since the car doesn't sit perfectly level due to asymmetries such as driver weight. Our front and rear adjustable-length drop links for C4/C2 allow you to eliminate preload of the sway bar for maximum performance.
A preloaded sway bar shifts the weight carried by each of the tyres, increasing grip on weighted ones at the expense of decreasing grip on un-weighted ones. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tyre locks up first. Preload can be completely eliminated by adjusting drop link length and sway bar performance optimized.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271003
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 991.1 and 991.2 C2
Porsche 991.1 and 991.2 C4
Porsche 991 GT3
Porsche 991 GT3 RS
NOT FOR PDDC
Adjustable Drop Links
The ideal sway bar (anti roll bar) is completely unloaded at static ride height. Stock drop links almost always preload the sway bar since the car doesn't sit perfectly level due to asymmetries such as driver weight. Our front and rear adjustable-length drop links for C4/C2 allow you to eliminate preload of the sway bar for maximum performance.
A preloaded sway bar shifts the weight carried by each of the tyres, increasing grip on weighted ones at the expense of decreasing grip on un-weighted ones. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tyre locks up first. Preload can be completely eliminated by adjusting drop link length and sway bar performance optimized.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271003
2271003
99134306902
9P1411317
99134307002
9P1411318
99134306980
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
£345.00
Now £338.10
Orderable
Rear retro RSR adjustable sway bar. Porsche 911 / 912 / 930 / 914
Code: 1-RSRRSBA
Rear retro RSR adjustable sway bar.
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Retro RSR Adjustable Sway Bar System
Retro appearance combined with modern performance and features make these adjustable sway bars (anti roll bar) a great choice for period-correct builds.
Drop links
Appearance similar to the RSR originals with a grey colour for a discreet and retro appearance. Left and right threaded precision rod ends make easy work of adjusting front drop link length. Adjustable length makes it easy to eliminate any preload on the bar. Teflon lined rod ends never require lubrication.
Lightweight
Hollow bars weigh half as much as similar solid bars delivering equal stiffness..
Bushings
Teflon impregnated bushings are grease and maintenance free and provide smooth operation and long life.
Through-body style front bar
Installs through the body same as the pre-1974 cars and the early turbo cars. Cars not originally equipped with a through-body sway bar should purchase the optional backer plate kit.
Retro-Look Arms
Steel arms are similar to the original RSR type and have drilled adjustment positions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1-RSRRSBA
The product you are viewing cross references to these numbers
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Retro RSR Adjustable Sway Bar System
Retro appearance combined with modern performance and features make these adjustable sway bars (anti roll bar) a great choice for period-correct builds.
Drop links
Appearance similar to the RSR originals with a grey colour for a discreet and retro appearance. Left and right threaded precision rod ends make easy work of adjusting front drop link length. Adjustable length makes it easy to eliminate any preload on the bar. Teflon lined rod ends never require lubrication.
Lightweight
Hollow bars weigh half as much as similar solid bars delivering equal stiffness..
Bushings
Teflon impregnated bushings are grease and maintenance free and provide smooth operation and long life.
Through-body style front bar
Installs through the body same as the pre-1974 cars and the early turbo cars. Cars not originally equipped with a through-body sway bar should purchase the optional backer plate kit.
Retro-Look Arms
Steel arms are similar to the original RSR type and have drilled adjustment positions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1-RSRRSBA
91133370111
477411313M
93033370125
93033370129
93033370128
91133370107
477411313N
93033370123
91133370101
91133370104
90133370103
90133370104
93033370100
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £710.50
Oil Line 30mm Tube Nut Replacement Kit Porsche 911 / 930 / 964 / 993
Code: 0170000
Rear hollow sway Bar.
Kit sold individually -2 required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Save Expensive Thermostats And Oil Lines
Stripped threads are a common problem when removing oil lines from the external thermostat.
The aluminum thermostat threads become fused to the steel tube nut that secures the oil lines. If you get enough leverage to force the nut free, it takes the aluminum threads along with it – destroying the expensive thermostat and the oil line.
Elephant Racing has the solution; we manufacture a 30mm tube nut replacement kit that let's you save thermostats and oil lines.
If your oil lines won't come free from the thermostat, use a cut-off wheel to slit the side of the tube nut. You can then break the nut free using a cold chisel. This technique sacrifices the tube nut to save the expensive thermostat.
You then use our kit to replace the tube nut that was cut off. Both the oil line and the thermostat are saved.
The kit provides a 2-piece tube nut. The threaded nut fits over the end of the tube and is slipped on first. A spring lock ring is then slipped on. The spring lock ring cinches down on the tube, preventing the nut from coming off
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0170000
The product you are viewing cross references to these numbers
Kit sold individually -2 required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Save Expensive Thermostats And Oil Lines
Stripped threads are a common problem when removing oil lines from the external thermostat.
The aluminum thermostat threads become fused to the steel tube nut that secures the oil lines. If you get enough leverage to force the nut free, it takes the aluminum threads along with it – destroying the expensive thermostat and the oil line.
Elephant Racing has the solution; we manufacture a 30mm tube nut replacement kit that let's you save thermostats and oil lines.
If your oil lines won't come free from the thermostat, use a cut-off wheel to slit the side of the tube nut. You can then break the nut free using a cold chisel. This technique sacrifices the tube nut to save the expensive thermostat.
You then use our kit to replace the tube nut that was cut off. Both the oil line and the thermostat are saved.
The kit provides a 2-piece tube nut. The threaded nut fits over the end of the tube and is slipped on first. A spring lock ring is then slipped on. The spring lock ring cinches down on the tube, preventing the nut from coming off
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0170000
0170000
96420725404
96420725414
96420725405
96420725402
96420725405
93010774312
93010774315
93010774316
93010774310
91110773011
91110774310
91110774312
91110773011
91110772910
91110772911
91120731501
91120731503
91110772011
91110772012
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£58.00
Now £56.84
In stock
Rear trailing arm bush kit. Porsche 911 / 930 / 912
Code: 22900
Spring plate rubber bushing kit
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Choice of Compound
Trailing arm bushings are available in "Sport" and "Stock" hardness.
Stock Hardness
Replicates the OEM rubber to ensure factory ride quality and performance levels.
Sport Hardness
Sport bushings have a harder rubber compound for less deflection and more precise handling.
Sport provides a nice intermediate step between our Stock rubber trailing arm bushings are our top performing WeatherSealed Monoballs.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
22900
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Choice of Compound
Trailing arm bushings are available in "Sport" and "Stock" hardness.
Stock Hardness
Replicates the OEM rubber to ensure factory ride quality and performance levels.
Sport Hardness
Sport bushings have a harder rubber compound for less deflection and more precise handling.
Sport provides a nice intermediate step between our Stock rubber trailing arm bushings are our top performing WeatherSealed Monoballs.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
22900
2290026
2290005
90133105900
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £215.60
Spring plate rubber bushing kit. Porsche 911 / 930 / 912
Code: 229000
Spring plate rubber bushing kit
1 kit required per car
Fits
Porsche 911 SWB - 1965 to 1967
Porsche 911 - 1967 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Stock Spec Spring Plate Bushes
A true stock spec bushing replacement for spring plates.
Spring plate bush condition can be accessed by looking at the hole in the spring plate cover. It should be concentric around the spring plate. When the bushings deform, the cover becomes non-concentric around the spring plate and in extreme cases actually contacts the cover plate – metal-to-metal.
More than just bushings, this is a full kit that includes inner and outer bushings (4 pcs), adhesive, instructions, long bolts to press in the bushings, and abrasive cloth to prep the surface.
Rubber is the choice if you want to restore factory ride and performance in a zero-maintenance solution. Check our PolyBronze Bearings for a high-performance solution.
Also see our Bushings Removal Tool to simplify the removal of old bushings.
Notes – 1967 spring plate bushings changed mid-year
The following 1967 chassis numbers transitioned to the late style 1969-89 style bushes.
• 1967 911 from Chassis Number 307 325
• 1967 912 from Chassis Serial 354 938
• 1967 911 S from Chassis Serial 305101 A
All earlier 1967 chassis numbers use the early 1965-67 style bushes
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
229000
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 911 SWB - 1965 to 1967
Porsche 911 - 1967 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Stock Spec Spring Plate Bushes
A true stock spec bushing replacement for spring plates.
Spring plate bush condition can be accessed by looking at the hole in the spring plate cover. It should be concentric around the spring plate. When the bushings deform, the cover becomes non-concentric around the spring plate and in extreme cases actually contacts the cover plate – metal-to-metal.
More than just bushings, this is a full kit that includes inner and outer bushings (4 pcs), adhesive, instructions, long bolts to press in the bushings, and abrasive cloth to prep the surface.
Rubber is the choice if you want to restore factory ride and performance in a zero-maintenance solution. Check our PolyBronze Bearings for a high-performance solution.
Also see our Bushings Removal Tool to simplify the removal of old bushings.
Notes – 1967 spring plate bushings changed mid-year
The following 1967 chassis numbers transitioned to the late style 1969-89 style bushes.
• 1967 911 from Chassis Number 307 325
• 1967 912 from Chassis Serial 354 938
• 1967 911 S from Chassis Serial 305101 A
All earlier 1967 chassis numbers use the early 1965-67 style bushes
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
229000
2290003
2290004
64433313100
90133319500
90133300301
90133300309
91133300900
91133300905
91133300902
91133300906
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Prices from: £117.60
Spring plate bushing tool. Porsche 911 / 930 / 912 / 944 / 968
Code: 2061002
Spring plate bushing tool.
1 required per lifetime.
Fits:
Porsche 911 - 1965 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Porsche 944 - 1982 to 1991
Porsche 968 - 1995 to 1995
We've developed this tool to simplify removal of spring plate bushings. The bushings are bonded to the spring plate, and removal is not easy.
This convenient cutting tool shaves the bushings off, removing nearly all the rubber thereby greatly simplifying the bushing removal process.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2061002
The product you are viewing cross references to these numbers
1 required per lifetime.
Fits:
Porsche 911 - 1965 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Porsche 944 - 1982 to 1991
Porsche 968 - 1995 to 1995
We've developed this tool to simplify removal of spring plate bushings. The bushings are bonded to the spring plate, and removal is not easy.
This convenient cutting tool shaves the bushings off, removing nearly all the rubber thereby greatly simplifying the bushing removal process.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2061002
2061002
91133300905
91133300902
90133300309
90133300307
90133301302
90133300300
90133300301
91133300900
91133300906
95133302100
477511202
477511201
113511205B
113511206B
95133102132
94433102101
95133102232
94433102201
95133102101
95133102131
95133102201
95133102231
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£95.00
Now £93.10
Orderable
Bolt-on adjustable bump steer kit. Porsche 911 / 930 / 914 / 912 / 944
Code: 2110901
Bolt-on adjustable bump steer kit
1 kit required per car
Fits
Porsche 911 - 1969 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 914 - 1970 to 1976
Porsche 912 - 1976 to 1976
Porsche 944 - 1985 to 1991
Adjustable, Bolt-on and Weather Sealed
Fully adjustable adding from .5 to 1.25 inches of spacing in .125 inch increments.
Bump Steer Adjustable – Fully adjustable adding .5 to 1.25 inches of spacing in .125 inch increments. Yoke type spacer grips stock steering knuckle for added strength.
Rod End – Weather sealed precision rods ends included work with regular turbo tie rods. Rubber boots seal out dirt and and water for extended life.
Our purpose-made rod ends are extra long to ensure proper threaded engagement with standard turbo tie rods
Spindle Height – Suitable for spindle height ranging from stock up to 19mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2110901
The product you are viewing cross references to these numbers
1 kit required per car
Fits
Porsche 911 - 1969 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 914 - 1970 to 1976
Porsche 912 - 1976 to 1976
Porsche 944 - 1985 to 1991
Adjustable, Bolt-on and Weather Sealed
Fully adjustable adding from .5 to 1.25 inches of spacing in .125 inch increments.
Bump Steer Adjustable – Fully adjustable adding .5 to 1.25 inches of spacing in .125 inch increments. Yoke type spacer grips stock steering knuckle for added strength.
Rod End – Weather sealed precision rods ends included work with regular turbo tie rods. Rubber boots seal out dirt and and water for extended life.
Our purpose-made rod ends are extra long to ensure proper threaded engagement with standard turbo tie rods
Spindle Height – Suitable for spindle height ranging from stock up to 19mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2110901
2110901
91134703100
91134703100
91134732204
93034732200
93034703101
94434733301
94434733305
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
£410.00
Now £401.80
Orderable
